Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Materials research (São Carlos. Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392022000100247 |
Resumo: | Abstract The purpose of this research is to investigate the effect of heat treatment parameters on the tool life and surface roughness of dual phase steel. Optimization of machining parameters (cutting speed, feed and depth of cut) is carried out for the machinability tests on medium carbon low alloy steel. Taguchi’s method of design is used to carry out machinability tests. Analysis of variance (ANOVA) is carried out to determine the relative contribution of machining parameters on tool life and surface roughness. Microstructure analysis is carried out to ascertain the machining behavior of the steel. Results have shown that, depth of cut and cutting speed are the most significant factors contributing on the variation of the tool life and surface roughness. Optimized machining parameters are calculated in order to obtain higher tool life and lower surface roughness value. |
id |
ABMABCABPOL-1_f492f49af05e39670b5ff2351b2a10f6 |
---|---|
oai_identifier_str |
oai:scielo:S1516-14392022000100247 |
network_acronym_str |
ABMABCABPOL-1 |
network_name_str |
Materials research (São Carlos. Online) |
repository_id_str |
|
spelling |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase SteelFerritebainitemartensitedual phaseAISI1040Abstract The purpose of this research is to investigate the effect of heat treatment parameters on the tool life and surface roughness of dual phase steel. Optimization of machining parameters (cutting speed, feed and depth of cut) is carried out for the machinability tests on medium carbon low alloy steel. Taguchi’s method of design is used to carry out machinability tests. Analysis of variance (ANOVA) is carried out to determine the relative contribution of machining parameters on tool life and surface roughness. Microstructure analysis is carried out to ascertain the machining behavior of the steel. Results have shown that, depth of cut and cutting speed are the most significant factors contributing on the variation of the tool life and surface roughness. Optimized machining parameters are calculated in order to obtain higher tool life and lower surface roughness value.ABM, ABC, ABPol2022-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392022000100247Materials Research v.25 2022reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/1980-5373-mr-2021-0351info:eu-repo/semantics/openAccessBM,GurumurthyHindi,JamaluddinHegde,AnandaSharma,SathyashankaraKini,Achuthaeng2022-01-13T00:00:00Zoai:scielo:S1516-14392022000100247Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2022-01-13T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.none.fl_str_mv |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
title |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
spellingShingle |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel BM,Gurumurthy Ferrite bainite martensite dual phase AISI1040 |
title_short |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
title_full |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
title_fullStr |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
title_full_unstemmed |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
title_sort |
Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel |
author |
BM,Gurumurthy |
author_facet |
BM,Gurumurthy Hindi,Jamaluddin Hegde,Ananda Sharma,Sathyashankara Kini,Achutha |
author_role |
author |
author2 |
Hindi,Jamaluddin Hegde,Ananda Sharma,Sathyashankara Kini,Achutha |
author2_role |
author author author author |
dc.contributor.author.fl_str_mv |
BM,Gurumurthy Hindi,Jamaluddin Hegde,Ananda Sharma,Sathyashankara Kini,Achutha |
dc.subject.por.fl_str_mv |
Ferrite bainite martensite dual phase AISI1040 |
topic |
Ferrite bainite martensite dual phase AISI1040 |
description |
Abstract The purpose of this research is to investigate the effect of heat treatment parameters on the tool life and surface roughness of dual phase steel. Optimization of machining parameters (cutting speed, feed and depth of cut) is carried out for the machinability tests on medium carbon low alloy steel. Taguchi’s method of design is used to carry out machinability tests. Analysis of variance (ANOVA) is carried out to determine the relative contribution of machining parameters on tool life and surface roughness. Microstructure analysis is carried out to ascertain the machining behavior of the steel. Results have shown that, depth of cut and cutting speed are the most significant factors contributing on the variation of the tool life and surface roughness. Optimized machining parameters are calculated in order to obtain higher tool life and lower surface roughness value. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-01-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392022000100247 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392022000100247 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/1980-5373-mr-2021-0351 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
ABM, ABC, ABPol |
publisher.none.fl_str_mv |
ABM, ABC, ABPol |
dc.source.none.fl_str_mv |
Materials Research v.25 2022 reponame:Materials research (São Carlos. Online) instname:Universidade Federal de São Carlos (UFSCAR) instacron:ABM ABC ABPOL |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
ABM ABC ABPOL |
institution |
ABM ABC ABPOL |
reponame_str |
Materials research (São Carlos. Online) |
collection |
Materials research (São Carlos. Online) |
repository.name.fl_str_mv |
Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
dedz@power.ufscar.br |
_version_ |
1754212680560803840 |