Zinc layered hydroxide salts: intercalation and incorporation into low-density polyethylene

• Autor(a) principal: Jaerger,Silvia
• Data de Publicação: 2014
• Outros Autores: Zimmermann,Ademir, Zawadzki,Sonia Faria, Wypych,Fernando, Amico,Sandro Campos
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Polímeros (São Carlos. Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0104-14282014000600007
• topic: Layered hydroxide salts; nanocomposite; low-density polyethylene

In this study, polymer composites using low-density polyethylene (LDPE) and layered hydroxide salts (LHS) were synthesized. The following compositions of LHS were obtained Zn5(OH)8(An-)2/n.yH2O, where A was varied in order to obtain hydrophilic (A = NO3-) or hydrophobic (A = DDS- - dodecyl sulfate or DBS- - dodecyl benzene sulfonate). Synthesis was carried out by co-precipitation in alkaline medium and drying, being followed by characterization via Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy. A variable amount of filler was then incorporated into the LDPE via extrusion, which was then injection molded to obtain specimens for evaluating tensile properties (Young's modulus, tensile strength, strain at break and toughness). For comparison, the sodium salts of the surfactants (NaDDS and NaDBS) were also used as fillers in LDPE. The X-ray diffraction results indicated that the hydrophobic LHS were exfoliated in the polymer matrix, whereas the hydrophilic LHS was only delaminated. In the LDPE composites, melting and crystallization temperatures were nearly constant, along with the crystallinity indexes. The mechanical properties were mainly varied when the organophilic LHS was used. Overall, fillers based on LHS, especially those containing hydrophobic anions, may be interesting alternatives in the production of reinforced thermoplastics.