Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica

Detalhes bibliográficos
Autor(a) principal: Nascimento, Bruna Luiza do
Data de Publicação: 2018
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório do Centro Universitário Braz Cubas
Texto Completo: https://repositorio.cruzeirodosul.edu.br/handle/123456789/2085
Resumo: The objective of this study was to evaluate the effect of the active application of hydrofluoric and phosphoric acids by the use of sonic vibration apparatus on the bond strength of a resin cement to a feldspathic and a glass ceramic for CAD/CAM. Ceramic blocks (Mark II and Suprinity) were cut and distributed in 2 groups according to the material used. Each group was subdivided into 6 subgroups according to the treatment technique (n=12): F - manufacturer's recommended technique (control); AF - equal to control, but with active application of hydrofluoric acid; F+P - equal to control, with cleaning with 37% phosphoric acid; AF+P - equal to F+P, with active application only of hydrofluoric acid; F+AP - equal to F+P with active application only of phosphoric acid; AF+AP - equal to F+P with active application of both acids. After that, cylinders (1 mm in diameter and 1 mm in height) were made with resin cement. The specimens were stored in distilled water at 37°C for 24 hours. Afterwards, they were submitted to the mechanical test of micro-shear in a universal test machine (Emic) with a velocity of 0.5 mm/min. The bond strength data (MPa) were submitted to analysis of variance and Tukey's test, with a significance level of 5%. There was a significant difference between the groups for both ceramics (Mark II - p<0.0001; Suprinity - p<0.0001). The feldspathic ceramics (Mark II) showed the following results (MPa): F 29.66; AF 24.06; F+P 24.00; AF+P 32.11; F+AP 30.79; AF+AP 41.75.A glass ceramic (Suprinity) presented the following results (MPa): F 34.91; AF 20.32; F+P 27.11; AF+P 38.77; F+AP 24.27; AF+AP 31.04. For feldspathic ceramics the best results were observed when the active application of the hydrofluoric acid associated with the application of phosphoric acid (with active or passive application). For the glass ceramic, the behavior of the groups was similar, regardless of the treatments performed on the ceramic surface prior to cementation. It can be concluded that the different treatments of the surface of the ceramic before the cementation interfered significantly in the bond strength of the ceramics to the resin cement, depending on the type of ceramic.
id CUB_729fdedb2968f43f82de9efff6fd493d
oai_identifier_str oai:repositorio.cruzeirodosul.edu.br:123456789/2085
network_acronym_str CUB
network_name_str Repositório do Centro Universitário Braz Cubas
repository_id_str
spelling Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmicaOdontologiaCerâmicaResistência ao cisalhamentoCimentos dentáriosAdesivos dentináriosCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAThe objective of this study was to evaluate the effect of the active application of hydrofluoric and phosphoric acids by the use of sonic vibration apparatus on the bond strength of a resin cement to a feldspathic and a glass ceramic for CAD/CAM. Ceramic blocks (Mark II and Suprinity) were cut and distributed in 2 groups according to the material used. Each group was subdivided into 6 subgroups according to the treatment technique (n=12): F - manufacturer's recommended technique (control); AF - equal to control, but with active application of hydrofluoric acid; F+P - equal to control, with cleaning with 37% phosphoric acid; AF+P - equal to F+P, with active application only of hydrofluoric acid; F+AP - equal to F+P with active application only of phosphoric acid; AF+AP - equal to F+P with active application of both acids. After that, cylinders (1 mm in diameter and 1 mm in height) were made with resin cement. The specimens were stored in distilled water at 37°C for 24 hours. Afterwards, they were submitted to the mechanical test of micro-shear in a universal test machine (Emic) with a velocity of 0.5 mm/min. The bond strength data (MPa) were submitted to analysis of variance and Tukey's test, with a significance level of 5%. There was a significant difference between the groups for both ceramics (Mark II - p<0.0001; Suprinity - p<0.0001). The feldspathic ceramics (Mark II) showed the following results (MPa): F 29.66; AF 24.06; F+P 24.00; AF+P 32.11; F+AP 30.79; AF+AP 41.75.A glass ceramic (Suprinity) presented the following results (MPa): F 34.91; AF 20.32; F+P 27.11; AF+P 38.77; F+AP 24.27; AF+AP 31.04. For feldspathic ceramics the best results were observed when the active application of the hydrofluoric acid associated with the application of phosphoric acid (with active or passive application). For the glass ceramic, the behavior of the groups was similar, regardless of the treatments performed on the ceramic surface prior to cementation. It can be concluded that the different treatments of the surface of the ceramic before the cementation interfered significantly in the bond strength of the ceramics to the resin cement, depending on the type of ceramic.O objetivo deste estudo foi avaliar o efeito da aplicação ativa dos ácidos fluorídrico e fosfórico por meio do uso de aparelho de vibração sônica na resistência de união de um cimento resinoso à uma cerâmica feldspática (Mark II) e uma vitrocerâmica (Suprinity) para CAD/CAM. Foram cortados blocos de CAD/CAM (Mark II e Suprinity) e distribuídos em 2 grupos, de acordo com o material utilizado. Cada grupo foi subdividido em 6 subgrupos de acordo com a técnica de tratamento (n=12): F – técnica recomendada pelo fabricante (controle); AF – igual controle, mas com aplicação ativa do ácido fluorídrico; F+P – igual controle, mas com limpeza com ácido fosfórico a 37%; AF+P – igual F+P, mas com aplicação ativa apenas do ácido fluorídrico; F+AP igual F+P, mas com aplicação ativa apenas do ácido fosfórico; AF+AP - aplicação ativa de ambos os ácidos. Em seguida, cilindros (1 mm de diâmetro e 1 mm de altura) foram confeccionados com os cimentos resinoso do tipo fotoativado. Os espécimes foram armazenados em água destilada a 37oC por 24 horas. Após, foram submetidos ao ensaio mecânico de microcisalhamento em máquina de ensaio universal (Emic) com velocidade de 0,5 mm/min. Os dados de resistência de união (MPa) foram submetidos à análise de variância e teste de Tukey, com nível de significância de 5%. Houve diferença significativa entre os grupos para ambas as cerâmicas (Mark II – p<0,0001; Suprinity – p<0,0001). A cerâmica feldspática (Mark II) apresentou os seguintes resultados (MPa): F - 29,66; AF - 24,06; F+P - 24,00; AF+P - 32,11; F+AP - 30,79; AF+AP - 41,75.A vitrocerâmica (Suprinity) apresentou os seguintes resultados (MPa): F - 34,91; AF - 20,32; F+P - 27,11; AF+P - 38,77; F+AP - 24,27; AF+AP - 31,04. Para a cerâmica feldspática, os melhores resultados foram observados quando da aplicação ativa dos ácido fluorídrico associada à aplicação do ácido fosfórico (com aplicação ativa ou passiva). Para a vitrocerâmica, o comportamento dos grupos foram similares, independentemente dos tratamentos realizados na superfície da cerâmica antes da cimentação. Pode-se concluir que os diferentes tratamentos da superfície da cerâmica antes da cimentação interferiram significativamente na resistência de união das cerâmicas ao cimento resinoso, dependendo do tipo de cerâmicaUniversidade PositivoBrasilPós-GraduaçãoPrograma de Pós-Graduação em Odontologia ClínicaUPNolasco, Gisele Maria Correrhttp://lattes.cnpq.br/6612641373865783Nascimento, Bruna Luiza do2021-05-06T23:22:03Z20182021-05-06T23:22:03Z2018info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttps://repositorio.cruzeirodosul.edu.br/handle/123456789/2085porinfo:eu-repo/semantics/openAccessreponame:Repositório do Centro Universitário Braz Cubasinstname:Centro Universitário Braz Cubas (CUB)instacron:CUB2021-06-16T21:03:18Zoai:repositorio.cruzeirodosul.edu.br:123456789/2085Repositório InstitucionalPUBhttps://repositorio.brazcubas.edu.br/oai/requestbibli@brazcubas.edu.bropendoar:2021-06-16T21:03:18Repositório do Centro Universitário Braz Cubas - Centro Universitário Braz Cubas (CUB)false
dc.title.none.fl_str_mv Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
title Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
spellingShingle Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
Nascimento, Bruna Luiza do
Odontologia
Cerâmica
Resistência ao cisalhamento
Cimentos dentários
Adesivos dentinários
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA
title_short Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
title_full Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
title_fullStr Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
title_full_unstemmed Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
title_sort Efeito da aplicação ativa dos ácidos fluorídrico e fosfórico na resistência de união de um cimento resinoso à cerâmica feldspática e à vitrocerâmica
author Nascimento, Bruna Luiza do
author_facet Nascimento, Bruna Luiza do
author_role author
dc.contributor.none.fl_str_mv Nolasco, Gisele Maria Correr
http://lattes.cnpq.br/6612641373865783
dc.contributor.author.fl_str_mv Nascimento, Bruna Luiza do
dc.subject.por.fl_str_mv Odontologia
Cerâmica
Resistência ao cisalhamento
Cimentos dentários
Adesivos dentinários
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA
topic Odontologia
Cerâmica
Resistência ao cisalhamento
Cimentos dentários
Adesivos dentinários
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA
description The objective of this study was to evaluate the effect of the active application of hydrofluoric and phosphoric acids by the use of sonic vibration apparatus on the bond strength of a resin cement to a feldspathic and a glass ceramic for CAD/CAM. Ceramic blocks (Mark II and Suprinity) were cut and distributed in 2 groups according to the material used. Each group was subdivided into 6 subgroups according to the treatment technique (n=12): F - manufacturer's recommended technique (control); AF - equal to control, but with active application of hydrofluoric acid; F+P - equal to control, with cleaning with 37% phosphoric acid; AF+P - equal to F+P, with active application only of hydrofluoric acid; F+AP - equal to F+P with active application only of phosphoric acid; AF+AP - equal to F+P with active application of both acids. After that, cylinders (1 mm in diameter and 1 mm in height) were made with resin cement. The specimens were stored in distilled water at 37°C for 24 hours. Afterwards, they were submitted to the mechanical test of micro-shear in a universal test machine (Emic) with a velocity of 0.5 mm/min. The bond strength data (MPa) were submitted to analysis of variance and Tukey's test, with a significance level of 5%. There was a significant difference between the groups for both ceramics (Mark II - p<0.0001; Suprinity - p<0.0001). The feldspathic ceramics (Mark II) showed the following results (MPa): F 29.66; AF 24.06; F+P 24.00; AF+P 32.11; F+AP 30.79; AF+AP 41.75.A glass ceramic (Suprinity) presented the following results (MPa): F 34.91; AF 20.32; F+P 27.11; AF+P 38.77; F+AP 24.27; AF+AP 31.04. For feldspathic ceramics the best results were observed when the active application of the hydrofluoric acid associated with the application of phosphoric acid (with active or passive application). For the glass ceramic, the behavior of the groups was similar, regardless of the treatments performed on the ceramic surface prior to cementation. It can be concluded that the different treatments of the surface of the ceramic before the cementation interfered significantly in the bond strength of the ceramics to the resin cement, depending on the type of ceramic.
publishDate 2018
dc.date.none.fl_str_mv 2018
2018
2021-05-06T23:22:03Z
2021-05-06T23:22:03Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://repositorio.cruzeirodosul.edu.br/handle/123456789/2085
url https://repositorio.cruzeirodosul.edu.br/handle/123456789/2085
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Positivo
Brasil
Pós-Graduação
Programa de Pós-Graduação em Odontologia Clínica
UP
publisher.none.fl_str_mv Universidade Positivo
Brasil
Pós-Graduação
Programa de Pós-Graduação em Odontologia Clínica
UP
dc.source.none.fl_str_mv reponame:Repositório do Centro Universitário Braz Cubas
instname:Centro Universitário Braz Cubas (CUB)
instacron:CUB
instname_str Centro Universitário Braz Cubas (CUB)
instacron_str CUB
institution CUB
reponame_str Repositório do Centro Universitário Braz Cubas
collection Repositório do Centro Universitário Braz Cubas
repository.name.fl_str_mv Repositório do Centro Universitário Braz Cubas - Centro Universitário Braz Cubas (CUB)
repository.mail.fl_str_mv bibli@brazcubas.edu.br
_version_ 1798311353003278336