Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório do Centro Universitário Braz Cubas |
Texto Completo: | https://repositorio.cruzeirodosul.edu.br/handle/123456789/2086 |
Resumo: | The objective of this study was to evaluate the color stability of thin ceramic laminate veneers luted with resin cements and heated composite resins (60o C) for 12 months, as well as detremine the degree of conversion of the different luting agents. Two resin cements (AllCem – dual-cured (CRD) and AllCem Veneer – light-cured resin cement (CRF)] and three composite resins [Z100 (RCPF – fine particles), Herculite Classic (RCMH – micro-hybrid) e Durafill (RCMP – microparticles)] were used for cementing 0.8 mm-thick lithium silicate glass-ceramic laminates (Suprinity, shade B2 - HT) on bovine enamel. Eighty specimens were randomly divided into 8 groups according to the luting material (n = 10). After cementation and throughout the whole experiment, the specimens were stored in distilled water at 37°C. The CIELab color parameters were determined with a spectrophotometer (Easyshade Advance) at 24 hours after luting (baseline), 7, 30, 90, 180 days and 12 months. The degree of conversion (n = 3) was determined by micro-Raman spectroscopy (Senterra). The color stability data were analyzed by one-way ANOVA with repeated measures and Tukey’s test. For the degree of conversion, data were analyzed by one-way ANOVA and Tukey's test. All anyalyzes were perforemd with a significance level of 5%. For color change, the results indicated significant differences for luting material (p = 0.0006) and time (p < 0.0001). For the luting material, the mean ΔE values representing the lowest and highest variation were, respectively: CRD (1.48 ± 0.75), RCMP-AQ (2.35 ± 1.34) and RCMP (2, 50 ± 1.26). The mean ΔE values varied significantly over the 1-year period, being greater than 3.3 only for RCMP (3.6 ± 1.0) and RCMP-AQ (3.6 ± 1.6) groups. Regarding the degree of conversion, there were no statistically significant differences (p = 0.1268) among the tested luting materials. The degree of conversion ranged from 64.0% (RCPF-AQ) to 85.1% (CRD). A moderate to strong negative correlation was observed between the mean ΔE in the evaluated period and the degree of conversion, with Pearson's correlation coefficient of -0.68. It can be concluded that the different luting agents used for the cementation of thin ceramic laminate veneers influenced the final color of the restorations. The heating of the composite resins did not alter their degree of conversion. |
id |
CUB_c43c7bd66b2163e2cdfc358f1bd8d899 |
---|---|
oai_identifier_str |
oai:repositorio.cruzeirodosul.edu.br:123456789/2086 |
network_acronym_str |
CUB |
network_name_str |
Repositório do Centro Universitário Braz Cubas |
repository_id_str |
|
spelling |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 mesesOdontologia clinícaLigas metalo-cerâmicasCimento de silicatoCimentos de resinaCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAThe objective of this study was to evaluate the color stability of thin ceramic laminate veneers luted with resin cements and heated composite resins (60o C) for 12 months, as well as detremine the degree of conversion of the different luting agents. Two resin cements (AllCem – dual-cured (CRD) and AllCem Veneer – light-cured resin cement (CRF)] and three composite resins [Z100 (RCPF – fine particles), Herculite Classic (RCMH – micro-hybrid) e Durafill (RCMP – microparticles)] were used for cementing 0.8 mm-thick lithium silicate glass-ceramic laminates (Suprinity, shade B2 - HT) on bovine enamel. Eighty specimens were randomly divided into 8 groups according to the luting material (n = 10). After cementation and throughout the whole experiment, the specimens were stored in distilled water at 37°C. The CIELab color parameters were determined with a spectrophotometer (Easyshade Advance) at 24 hours after luting (baseline), 7, 30, 90, 180 days and 12 months. The degree of conversion (n = 3) was determined by micro-Raman spectroscopy (Senterra). The color stability data were analyzed by one-way ANOVA with repeated measures and Tukey’s test. For the degree of conversion, data were analyzed by one-way ANOVA and Tukey's test. All anyalyzes were perforemd with a significance level of 5%. For color change, the results indicated significant differences for luting material (p = 0.0006) and time (p < 0.0001). For the luting material, the mean ΔE values representing the lowest and highest variation were, respectively: CRD (1.48 ± 0.75), RCMP-AQ (2.35 ± 1.34) and RCMP (2, 50 ± 1.26). The mean ΔE values varied significantly over the 1-year period, being greater than 3.3 only for RCMP (3.6 ± 1.0) and RCMP-AQ (3.6 ± 1.6) groups. Regarding the degree of conversion, there were no statistically significant differences (p = 0.1268) among the tested luting materials. The degree of conversion ranged from 64.0% (RCPF-AQ) to 85.1% (CRD). A moderate to strong negative correlation was observed between the mean ΔE in the evaluated period and the degree of conversion, with Pearson's correlation coefficient of -0.68. It can be concluded that the different luting agents used for the cementation of thin ceramic laminate veneers influenced the final color of the restorations. The heating of the composite resins did not alter their degree of conversion.O objetivo deste estudo foi avaliar a estabilidade de cor de laminados cerâmicos de fina espessura, após a cimentação com cimentos resinosos e resinas compostas em temperatura ambiente e aquecida (60o C), durante 12 meses; bem como determinar o grau de conversão dos diferentes materiais para cimentação avaliados. Foram utilizados dois cimentos resinosos [(AllCem – cimento resinoso dual (CRD) e AllCem Veneer – cimento resinoso fotoativado (CRF)] e três resinas compostas [Z100 (RCPF – resina composta de partículas finas), Herculite Classic (RCMH – resina composta microhíbrida) e Durafill (RCMP – resina composta microparticulada)] para cimentação de laminados cerâmicos a base de silicato de lítio (Suprinity, cor B2-HT) com 0,8 mm de espessura, sobre esmalte bovino. Oitenta espécimes foram distribuídos aleatoriamente em 8 grupos de acordo com o material para cimentante (n = 10). Após a cimentação e durante todo o período de acompanhamento, os espécimes foram armazenados em água destilada a 37ºC. Os parâmetros de cor do sistema CIELab foram avaliados com um espectrofotômetro (Easyshade Advance) nos tempos de 24 horas após a cimentação (baseline), 7, 30, 90 e 180 dias e 12 meses. Para a determinação do grau de conversão, porções dos materiais de cimentação (n = 3) foram analisados por espectroscopia microRaman (Senterra). Os dados de alteração de cor foram analisados por ANOVA a um fator com medidas repetidas e teste de Tukey. Para o grau de conversão, os dados foram avaliados por ANOVA a um fator e teste de Tukey. Para todas as análises, o nível de significância foi de 5%. Para alteração de cor, os resultados indicaram diferenças estatisticamente significantes para o agente cimentante (p = 0,0006) e tempo (p < 0,0001). Considerando o agente cimentante, os valores médios de ΔE para os grupos com menor e maior variação foram, respectivamente: CRD (1,48 ± 0,75), RCMP-AQ (2,35 ± 1,34) e RCMP (2,50 ± 1,26). Os valores médios de ΔE variaram significativamente no período de 1 ano, sendo maiores que 3,3 apenas para os grupos RCMP (3,6 ± 1,0) e RCMP-AQ (3,6 ± 1,6). Em relação ao grau de conversão, não foram observadas diferenças estatisticamente significantes entre os materiais para cimentação avaliados (p = 0,1268). O grau de conversão variou entre 64,0% (RCPFAQ) e 85,1% (CRD). Foi observada correlação negativa moderada a forte entre o ΔE médio no período avaliado e o grau de conversão, com coeficiente de correlação de Pearson de -0,68. Pode-se concluir que os diferentes agentes cimentantes utilizados na cimentação de laminados cerâmicos de espessura fina influenciaram na cor final das restaurações. O aquecimento das resinas compostas não implicou em alteração do grau de conversão.Universidade PositivoBrasilPós-GraduaçãoPrograma de Pós-Graduação em Odontologia ClínicaUPGonzaga, Carla Castigliahttp://lattes.cnpq.br/0246614895218572Gugelmin, Brenda Procopiak2021-05-06T23:25:56Z20182021-05-06T23:25:56Z2018info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttps://repositorio.cruzeirodosul.edu.br/handle/123456789/2086porinfo:eu-repo/semantics/openAccessreponame:Repositório do Centro Universitário Braz Cubasinstname:Centro Universitário Braz Cubas (CUB)instacron:CUB2021-06-16T21:01:13Zoai:repositorio.cruzeirodosul.edu.br:123456789/2086Repositório InstitucionalPUBhttps://repositorio.brazcubas.edu.br/oai/requestbibli@brazcubas.edu.bropendoar:2021-06-16T21:01:13Repositório do Centro Universitário Braz Cubas - Centro Universitário Braz Cubas (CUB)false |
dc.title.none.fl_str_mv |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
title |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
spellingShingle |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses Gugelmin, Brenda Procopiak Odontologia cliníca Ligas metalo-cerâmicas Cimento de silicato Cimentos de resina CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
title_full |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
title_fullStr |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
title_full_unstemmed |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
title_sort |
Estabilidade de cor de laminados cerâmicos após a cimentação com cimentos resinosos e resinas compostas aquecidas: acompanhamento de 12 meses |
author |
Gugelmin, Brenda Procopiak |
author_facet |
Gugelmin, Brenda Procopiak |
author_role |
author |
dc.contributor.none.fl_str_mv |
Gonzaga, Carla Castiglia http://lattes.cnpq.br/0246614895218572 |
dc.contributor.author.fl_str_mv |
Gugelmin, Brenda Procopiak |
dc.subject.por.fl_str_mv |
Odontologia cliníca Ligas metalo-cerâmicas Cimento de silicato Cimentos de resina CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
topic |
Odontologia cliníca Ligas metalo-cerâmicas Cimento de silicato Cimentos de resina CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
The objective of this study was to evaluate the color stability of thin ceramic laminate veneers luted with resin cements and heated composite resins (60o C) for 12 months, as well as detremine the degree of conversion of the different luting agents. Two resin cements (AllCem – dual-cured (CRD) and AllCem Veneer – light-cured resin cement (CRF)] and three composite resins [Z100 (RCPF – fine particles), Herculite Classic (RCMH – micro-hybrid) e Durafill (RCMP – microparticles)] were used for cementing 0.8 mm-thick lithium silicate glass-ceramic laminates (Suprinity, shade B2 - HT) on bovine enamel. Eighty specimens were randomly divided into 8 groups according to the luting material (n = 10). After cementation and throughout the whole experiment, the specimens were stored in distilled water at 37°C. The CIELab color parameters were determined with a spectrophotometer (Easyshade Advance) at 24 hours after luting (baseline), 7, 30, 90, 180 days and 12 months. The degree of conversion (n = 3) was determined by micro-Raman spectroscopy (Senterra). The color stability data were analyzed by one-way ANOVA with repeated measures and Tukey’s test. For the degree of conversion, data were analyzed by one-way ANOVA and Tukey's test. All anyalyzes were perforemd with a significance level of 5%. For color change, the results indicated significant differences for luting material (p = 0.0006) and time (p < 0.0001). For the luting material, the mean ΔE values representing the lowest and highest variation were, respectively: CRD (1.48 ± 0.75), RCMP-AQ (2.35 ± 1.34) and RCMP (2, 50 ± 1.26). The mean ΔE values varied significantly over the 1-year period, being greater than 3.3 only for RCMP (3.6 ± 1.0) and RCMP-AQ (3.6 ± 1.6) groups. Regarding the degree of conversion, there were no statistically significant differences (p = 0.1268) among the tested luting materials. The degree of conversion ranged from 64.0% (RCPF-AQ) to 85.1% (CRD). A moderate to strong negative correlation was observed between the mean ΔE in the evaluated period and the degree of conversion, with Pearson's correlation coefficient of -0.68. It can be concluded that the different luting agents used for the cementation of thin ceramic laminate veneers influenced the final color of the restorations. The heating of the composite resins did not alter their degree of conversion. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018 2018 2021-05-06T23:25:56Z 2021-05-06T23:25:56Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://repositorio.cruzeirodosul.edu.br/handle/123456789/2086 |
url |
https://repositorio.cruzeirodosul.edu.br/handle/123456789/2086 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Positivo Brasil Pós-Graduação Programa de Pós-Graduação em Odontologia Clínica UP |
publisher.none.fl_str_mv |
Universidade Positivo Brasil Pós-Graduação Programa de Pós-Graduação em Odontologia Clínica UP |
dc.source.none.fl_str_mv |
reponame:Repositório do Centro Universitário Braz Cubas instname:Centro Universitário Braz Cubas (CUB) instacron:CUB |
instname_str |
Centro Universitário Braz Cubas (CUB) |
instacron_str |
CUB |
institution |
CUB |
reponame_str |
Repositório do Centro Universitário Braz Cubas |
collection |
Repositório do Centro Universitário Braz Cubas |
repository.name.fl_str_mv |
Repositório do Centro Universitário Braz Cubas - Centro Universitário Braz Cubas (CUB) |
repository.mail.fl_str_mv |
bibli@brazcubas.edu.br |
_version_ |
1798311349001912320 |