Mechanical project analysis using simulation tool CAE

Detalhes bibliográficos
Autor(a) principal: Oliveira, Washington Bueno
Data de Publicação: 2018
Outros Autores: Ferreira, André Rosa
Tipo de documento: Artigo
Idioma: por
Título da fonte: REMIPE
Texto Completo: https://remipe.fatecosasco.edu.br/index.php/remipe/article/view/72
Resumo: This study aims to analyze the axis of a tool which is used for mechanical milling operations to increase its life cycle and reliability. It will be used a Software for simulation CAE, for the analysis of the workpiece material mechanical properties, its weaknesses and the applied efforts on it. For the feasibility study there will be made modifications in the geometry of the tool and change the workpiece material, looking after for better results in the simulations. It will be used four materials for steel simulations SAE 4340, 7075 aluminum, steel SAE 1045 steel and A2 tool. The first simulation detected a weak point in the structure part and after the completion of changes in the structure and material, the obtained results showed an improvement of approximately 18% in plastic deformation on shear location.
id FATEC-3_a63d24911d6cab8398e8cdb8a886eb93
oai_identifier_str oai:remipe.fatecosasco.edu.br:article/72
network_acronym_str FATEC-3
network_name_str REMIPE
repository_id_str
spelling Mechanical project analysis using simulation tool CAEAnálise de projetos mecânico utilizando ferramenta de simulação CAECAEsimulaçãovida útilconfiabilidadeCAEsimulationlife cyclereliabilityThis study aims to analyze the axis of a tool which is used for mechanical milling operations to increase its life cycle and reliability. It will be used a Software for simulation CAE, for the analysis of the workpiece material mechanical properties, its weaknesses and the applied efforts on it. For the feasibility study there will be made modifications in the geometry of the tool and change the workpiece material, looking after for better results in the simulations. It will be used four materials for steel simulations SAE 4340, 7075 aluminum, steel SAE 1045 steel and A2 tool. The first simulation detected a weak point in the structure part and after the completion of changes in the structure and material, the obtained results showed an improvement of approximately 18% in plastic deformation on shear location.Este estudo visa analisar a frequente quebra do eixo de uma ferramenta utilizada para operações mecânicas de fresagem, para o aumento de sua vida útil e confiabilidade. Será utilizado um software para simulação de CAE, para análise das propriedades mecânicas do material da peça, seus pontos frágeis e os esforços aplicados. Para a viabilidade do estudo houve alterações na geometria da ferramenta e mudança do material utilizado, buscando melhores resultados nas simulações. Serão utilizados quatro materiais para as simulações aço SAE 4340, alumínio 7075, aço SAE 1045 e aço ferramenta tipo A2. A primeira simulação detectou um ponto de fragilidade na estrutura da peça, após a realização das alterações na estrutura e do material, os resultados obtidos apresentaram uma melhora de aproximadamente de 18% na deformação plástica no local de cisalhamento.FATEC Osasco2018-01-26info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://remipe.fatecosasco.edu.br/index.php/remipe/article/view/7210.21574/remipe.v2i1.72REMIPE - Revista de Micro e Pequenas Empresas e Empreendedorismo da Fatec Osasco; v. 2 n. 1 (2016): REMIPE - Revista de Micro e Pequenas Empresas e Empreendedorismo da Fatec Osasco; 19 - 322446-862210.21574/remipe.v2i1reponame:REMIPEinstname:Faculdade de Tecnologia de Osasco (FATEC)instacron:FATECporhttps://remipe.fatecosasco.edu.br/index.php/remipe/article/view/72/36Oliveira, Washington BuenoFerreira, André Rosainfo:eu-repo/semantics/openAccess2021-06-07T16:36:51Zoai:remipe.fatecosasco.edu.br:article/72Revistahttp://remipe.fatecosasco.edu.br/index.php/remipe/PRIhttp://remipe.fatecosasco.edu.br/index.php/remipe/oaifernando@fernandoasantos.com.br10.215742446-86222446-8622opendoar:2024-04-22T12:03:03.364495REMIPE - Faculdade de Tecnologia de Osasco (FATEC)false
dc.title.none.fl_str_mv Mechanical project analysis using simulation tool CAE
Análise de projetos mecânico utilizando ferramenta de simulação CAE
title Mechanical project analysis using simulation tool CAE
spellingShingle Mechanical project analysis using simulation tool CAE
Oliveira, Washington Bueno
CAE
simulação
vida útil
confiabilidade
CAE
simulation
life cycle
reliability
title_short Mechanical project analysis using simulation tool CAE
title_full Mechanical project analysis using simulation tool CAE
title_fullStr Mechanical project analysis using simulation tool CAE
title_full_unstemmed Mechanical project analysis using simulation tool CAE
title_sort Mechanical project analysis using simulation tool CAE
author Oliveira, Washington Bueno
author_facet Oliveira, Washington Bueno
Ferreira, André Rosa
author_role author
author2 Ferreira, André Rosa
author2_role author
dc.contributor.author.fl_str_mv Oliveira, Washington Bueno
Ferreira, André Rosa
dc.subject.por.fl_str_mv CAE
simulação
vida útil
confiabilidade
CAE
simulation
life cycle
reliability
topic CAE
simulação
vida útil
confiabilidade
CAE
simulation
life cycle
reliability
description This study aims to analyze the axis of a tool which is used for mechanical milling operations to increase its life cycle and reliability. It will be used a Software for simulation CAE, for the analysis of the workpiece material mechanical properties, its weaknesses and the applied efforts on it. For the feasibility study there will be made modifications in the geometry of the tool and change the workpiece material, looking after for better results in the simulations. It will be used four materials for steel simulations SAE 4340, 7075 aluminum, steel SAE 1045 steel and A2 tool. The first simulation detected a weak point in the structure part and after the completion of changes in the structure and material, the obtained results showed an improvement of approximately 18% in plastic deformation on shear location.
publishDate 2018
dc.date.none.fl_str_mv 2018-01-26
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://remipe.fatecosasco.edu.br/index.php/remipe/article/view/72
10.21574/remipe.v2i1.72
url https://remipe.fatecosasco.edu.br/index.php/remipe/article/view/72
identifier_str_mv 10.21574/remipe.v2i1.72
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://remipe.fatecosasco.edu.br/index.php/remipe/article/view/72/36
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv FATEC Osasco
publisher.none.fl_str_mv FATEC Osasco
dc.source.none.fl_str_mv REMIPE - Revista de Micro e Pequenas Empresas e Empreendedorismo da Fatec Osasco; v. 2 n. 1 (2016): REMIPE - Revista de Micro e Pequenas Empresas e Empreendedorismo da Fatec Osasco; 19 - 32
2446-8622
10.21574/remipe.v2i1
reponame:REMIPE
instname:Faculdade de Tecnologia de Osasco (FATEC)
instacron:FATEC
instname_str Faculdade de Tecnologia de Osasco (FATEC)
instacron_str FATEC
institution FATEC
reponame_str REMIPE
collection REMIPE
repository.name.fl_str_mv REMIPE - Faculdade de Tecnologia de Osasco (FATEC)
repository.mail.fl_str_mv fernando@fernandoasantos.com.br
_version_ 1797047758145716224

Registros relacionados