Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2

Detalhes bibliográficos
Autor(a) principal: Caicedo,Diana Fernanda
Data de Publicação: 2020
Outros Autores: Brum,Irineu Antônio Schadach, Buitrago,Luis Andrés Betancourt
Tipo de documento: Artigo
Idioma: eng
Título da fonte: REM - International Engineering Journal
Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S2448-167X2020000100099
Resumo: Abstract Ferricyanide Fe(CN) 6 3- is one of the most stable cyanometallic complexes present in the gold mining effluents. This cyanocomplex is hard to degrade by natural attenuation and generates a negative impact on aquatic environments. Although free cyanide (CN-) can be obtained by acidifying the solution, the CN- is lethal for all forms of life. The oxidation of Fe(CN) 6 3- in a typical photocatalitic system was evaluated with the addition of H2O2. To verify the degradation, chemical parameters, such as free cyanide, the formation of ammonia, nitrate, and total iron were analyzed at the end of the process. Different parameters were evaluated to analyze the behavior of the degradation: 1. dark stage adsorption using the catalyst, 2. the TiO2 dosage, 3. Addition of H2O2, 4. UV radiation power (120 and 200W) and finally a test of TiO2 with solar radiation. The photolysis effect from a ferricyanide solution at 100 mg L-1 at alkaline pH 13, showed that the complex studied is highly stable since under UV irradiation conditions (l> 300 nm), a low rate of dissociation was observed. After 24h of irradiation, the cyanocomplex was under 20%, whereas degradations up to 70% were obtained in a heterogeneous photocatalysis system with TiO2. The best result was achieved with the H2O2 and TiO2 photocatalytic system, and the stoichiometric concentration was about 2.5 times less than the peroxide used in the gold mining industry, reaching 83% degradation. The photocatalytic process obtained less toxic byproducts than the original synthetic ferricyanide used as mining wastewater.
id FG-1_f7d9ad79714e9c5c14dfa4cb25bca505
oai_identifier_str oai:scielo:S2448-167X2020000100099
network_acronym_str FG-1
network_name_str REM - International Engineering Journal
repository_id_str
spelling Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2cyanideheterogeneous photocatalysisTitanium dioxideUV radiationgold wastewaterAbstract Ferricyanide Fe(CN) 6 3- is one of the most stable cyanometallic complexes present in the gold mining effluents. This cyanocomplex is hard to degrade by natural attenuation and generates a negative impact on aquatic environments. Although free cyanide (CN-) can be obtained by acidifying the solution, the CN- is lethal for all forms of life. The oxidation of Fe(CN) 6 3- in a typical photocatalitic system was evaluated with the addition of H2O2. To verify the degradation, chemical parameters, such as free cyanide, the formation of ammonia, nitrate, and total iron were analyzed at the end of the process. Different parameters were evaluated to analyze the behavior of the degradation: 1. dark stage adsorption using the catalyst, 2. the TiO2 dosage, 3. Addition of H2O2, 4. UV radiation power (120 and 200W) and finally a test of TiO2 with solar radiation. The photolysis effect from a ferricyanide solution at 100 mg L-1 at alkaline pH 13, showed that the complex studied is highly stable since under UV irradiation conditions (l> 300 nm), a low rate of dissociation was observed. After 24h of irradiation, the cyanocomplex was under 20%, whereas degradations up to 70% were obtained in a heterogeneous photocatalysis system with TiO2. The best result was achieved with the H2O2 and TiO2 photocatalytic system, and the stoichiometric concentration was about 2.5 times less than the peroxide used in the gold mining industry, reaching 83% degradation. The photocatalytic process obtained less toxic byproducts than the original synthetic ferricyanide used as mining wastewater.Fundação Gorceix2020-03-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S2448-167X2020000100099REM - International Engineering Journal v.73 n.1 2020reponame:REM - International Engineering Journalinstname:Fundação Gorceix (FG)instacron:FG10.1590/0370-44672019730042info:eu-repo/semantics/openAccessCaicedo,Diana FernandaBrum,Irineu Antônio SchadachBuitrago,Luis Andrés Betancourteng2020-01-06T00:00:00Zoai:scielo:S2448-167X2020000100099Revistahttps://www.rem.com.br/?lang=pt-brPRIhttps://old.scielo.br/oai/scielo-oai.php||editor@rem.com.br2448-167X2448-167Xopendoar:2020-01-06T00:00REM - International Engineering Journal - Fundação Gorceix (FG)false
dc.title.none.fl_str_mv Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
title Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
spellingShingle Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
Caicedo,Diana Fernanda
cyanide
heterogeneous photocatalysis
Titanium dioxide
UV radiation
gold wastewater
title_short Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
title_full Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
title_fullStr Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
title_full_unstemmed Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
title_sort Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
author Caicedo,Diana Fernanda
author_facet Caicedo,Diana Fernanda
Brum,Irineu Antônio Schadach
Buitrago,Luis Andrés Betancourt
author_role author
author2 Brum,Irineu Antônio Schadach
Buitrago,Luis Andrés Betancourt
author2_role author
author
dc.contributor.author.fl_str_mv Caicedo,Diana Fernanda
Brum,Irineu Antônio Schadach
Buitrago,Luis Andrés Betancourt
dc.subject.por.fl_str_mv cyanide
heterogeneous photocatalysis
Titanium dioxide
UV radiation
gold wastewater
topic cyanide
heterogeneous photocatalysis
Titanium dioxide
UV radiation
gold wastewater
description Abstract Ferricyanide Fe(CN) 6 3- is one of the most stable cyanometallic complexes present in the gold mining effluents. This cyanocomplex is hard to degrade by natural attenuation and generates a negative impact on aquatic environments. Although free cyanide (CN-) can be obtained by acidifying the solution, the CN- is lethal for all forms of life. The oxidation of Fe(CN) 6 3- in a typical photocatalitic system was evaluated with the addition of H2O2. To verify the degradation, chemical parameters, such as free cyanide, the formation of ammonia, nitrate, and total iron were analyzed at the end of the process. Different parameters were evaluated to analyze the behavior of the degradation: 1. dark stage adsorption using the catalyst, 2. the TiO2 dosage, 3. Addition of H2O2, 4. UV radiation power (120 and 200W) and finally a test of TiO2 with solar radiation. The photolysis effect from a ferricyanide solution at 100 mg L-1 at alkaline pH 13, showed that the complex studied is highly stable since under UV irradiation conditions (l> 300 nm), a low rate of dissociation was observed. After 24h of irradiation, the cyanocomplex was under 20%, whereas degradations up to 70% were obtained in a heterogeneous photocatalysis system with TiO2. The best result was achieved with the H2O2 and TiO2 photocatalytic system, and the stoichiometric concentration was about 2.5 times less than the peroxide used in the gold mining industry, reaching 83% degradation. The photocatalytic process obtained less toxic byproducts than the original synthetic ferricyanide used as mining wastewater.
publishDate 2020
dc.date.none.fl_str_mv 2020-03-01
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://old.scielo.br/scielo.php?script=sci_arttext&pid=S2448-167X2020000100099
url http://old.scielo.br/scielo.php?script=sci_arttext&pid=S2448-167X2020000100099
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 10.1590/0370-44672019730042
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv text/html
dc.publisher.none.fl_str_mv Fundação Gorceix
publisher.none.fl_str_mv Fundação Gorceix
dc.source.none.fl_str_mv REM - International Engineering Journal v.73 n.1 2020
reponame:REM - International Engineering Journal
instname:Fundação Gorceix (FG)
instacron:FG
instname_str Fundação Gorceix (FG)
instacron_str FG
institution FG
reponame_str REM - International Engineering Journal
collection REM - International Engineering Journal
repository.name.fl_str_mv REM - International Engineering Journal - Fundação Gorceix (FG)
repository.mail.fl_str_mv ||editor@rem.com.br
_version_ 1754734691458482176