Numerical analysis of the resin transfer molding process via PAM - RTM Software
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Institucional da FURG (RI FURG) |
Texto Completo: | http://repositorio.furg.br/handle/1/5279 |
Resumo: | This work aims to investigate the infiltration of a CaCO3 filled resin in fibrous porous media (resin transfer molding process) using the PAM-RTM software. A preform of glass fiber mat (fraction 30%), with dimensions 320 x 150 x 3.6 mm, has been used in rectilinear injection experiments conducted at room temperature and injection pressure 0.25, 0.50 and 0.75 bar. The polyester resin contain 0% and 40% CaCO3. The numerical results were evaluated by direct comparison with experimental data. The flat flow-front profile of the rectilinear flow was reached approximately half length of the mold. It was observed, that the both velocity infiltration and permeability have decreased with increasing the CaCO3 content, thus, increasing the time to processing of the composite material. |
id |
FURG_8ea57c5891b8ecb3573d50006dd484d9 |
---|---|
oai_identifier_str |
oai:repositorio.furg.br:1/5279 |
network_acronym_str |
FURG |
network_name_str |
Repositório Institucional da FURG (RI FURG) |
repository_id_str |
|
spelling |
Numerical analysis of the resin transfer molding process via PAM - RTM SoftwareRTMFlow simulationLinear injectionPressureThis work aims to investigate the infiltration of a CaCO3 filled resin in fibrous porous media (resin transfer molding process) using the PAM-RTM software. A preform of glass fiber mat (fraction 30%), with dimensions 320 x 150 x 3.6 mm, has been used in rectilinear injection experiments conducted at room temperature and injection pressure 0.25, 0.50 and 0.75 bar. The polyester resin contain 0% and 40% CaCO3. The numerical results were evaluated by direct comparison with experimental data. The flat flow-front profile of the rectilinear flow was reached approximately half length of the mold. It was observed, that the both velocity infiltration and permeability have decreased with increasing the CaCO3 content, thus, increasing the time to processing of the composite material.2015-08-25T19:39:24Z2015-08-25T19:39:24Z2015info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfOLIVEIRA, Iran Rodrigues de et al. Numerical analysis of the resin transfer molding process via PAM - RTM Software. Defect and Diffusion Forum, Suíça, v. 365, p. 88-93, 2015. Disponível em: <http://www.ufrgs.br/lapol/numerical_analysis_of%20the_resin.pdf>. Acesso em: 18 jul. 2015.1012-0386http://repositorio.furg.br/handle/1/5279engOliveira, Iran Rodrigues deAmico, Sandro CamposSouza, Jeferson AvilaLima, Antonio Gilson Barbosa deinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da FURG (RI FURG)instname:Universidade Federal do Rio Grande (FURG)instacron:FURG2015-08-25T19:39:24Zoai:repositorio.furg.br:1/5279Repositório InstitucionalPUBhttps://repositorio.furg.br/oai/request || http://200.19.254.174/oai/requestopendoar:2015-08-25T19:39:24Repositório Institucional da FURG (RI FURG) - Universidade Federal do Rio Grande (FURG)false |
dc.title.none.fl_str_mv |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
title |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
spellingShingle |
Numerical analysis of the resin transfer molding process via PAM - RTM Software Oliveira, Iran Rodrigues de RTM Flow simulation Linear injection Pressure |
title_short |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
title_full |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
title_fullStr |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
title_full_unstemmed |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
title_sort |
Numerical analysis of the resin transfer molding process via PAM - RTM Software |
author |
Oliveira, Iran Rodrigues de |
author_facet |
Oliveira, Iran Rodrigues de Amico, Sandro Campos Souza, Jeferson Avila Lima, Antonio Gilson Barbosa de |
author_role |
author |
author2 |
Amico, Sandro Campos Souza, Jeferson Avila Lima, Antonio Gilson Barbosa de |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Oliveira, Iran Rodrigues de Amico, Sandro Campos Souza, Jeferson Avila Lima, Antonio Gilson Barbosa de |
dc.subject.por.fl_str_mv |
RTM Flow simulation Linear injection Pressure |
topic |
RTM Flow simulation Linear injection Pressure |
description |
This work aims to investigate the infiltration of a CaCO3 filled resin in fibrous porous media (resin transfer molding process) using the PAM-RTM software. A preform of glass fiber mat (fraction 30%), with dimensions 320 x 150 x 3.6 mm, has been used in rectilinear injection experiments conducted at room temperature and injection pressure 0.25, 0.50 and 0.75 bar. The polyester resin contain 0% and 40% CaCO3. The numerical results were evaluated by direct comparison with experimental data. The flat flow-front profile of the rectilinear flow was reached approximately half length of the mold. It was observed, that the both velocity infiltration and permeability have decreased with increasing the CaCO3 content, thus, increasing the time to processing of the composite material. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-08-25T19:39:24Z 2015-08-25T19:39:24Z 2015 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
OLIVEIRA, Iran Rodrigues de et al. Numerical analysis of the resin transfer molding process via PAM - RTM Software. Defect and Diffusion Forum, Suíça, v. 365, p. 88-93, 2015. Disponível em: <http://www.ufrgs.br/lapol/numerical_analysis_of%20the_resin.pdf>. Acesso em: 18 jul. 2015. 1012-0386 http://repositorio.furg.br/handle/1/5279 |
identifier_str_mv |
OLIVEIRA, Iran Rodrigues de et al. Numerical analysis of the resin transfer molding process via PAM - RTM Software. Defect and Diffusion Forum, Suíça, v. 365, p. 88-93, 2015. Disponível em: <http://www.ufrgs.br/lapol/numerical_analysis_of%20the_resin.pdf>. Acesso em: 18 jul. 2015. 1012-0386 |
url |
http://repositorio.furg.br/handle/1/5279 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da FURG (RI FURG) instname:Universidade Federal do Rio Grande (FURG) instacron:FURG |
instname_str |
Universidade Federal do Rio Grande (FURG) |
instacron_str |
FURG |
institution |
FURG |
reponame_str |
Repositório Institucional da FURG (RI FURG) |
collection |
Repositório Institucional da FURG (RI FURG) |
repository.name.fl_str_mv |
Repositório Institucional da FURG (RI FURG) - Universidade Federal do Rio Grande (FURG) |
repository.mail.fl_str_mv |
|
_version_ |
1807384417166950400 |