Development of counting system for wear measurements using thin layer activation and the wearing apparatus

• Autor(a) principal: Salgado, Cesar Marques
• Data de Publicação: 2017
• Outros Autores: Suita, Julio Cesar, França, Michel, Instituto de Engenharia Nuclear
• Tipo de documento: Artigo de conferência
• Idioma: eng
• Título da fonte: Repositório Institucional do IEN
• Texto Completo: http://carpedien.ien.gov.br:8080/handle/ien/2318
• topic: Counting systems; Wearing aparatus

This paper focus on developing a counting system for the Wearing Apparatus, which is a device previously built to generate measurable wear on a given surface (Main Source) and to carry the fillings from it to a filter (second source). The Thin Layer Activation is a technique used to produce activity on one of the Wearing Apparatus' piece, this activity is proportional to the amount of material worn, or scrapped, from the piece's surface. Thus, by measuring the activity on those two points it is possible to measure the produced wear. The methodology used in this work is based on simulations through MCNP-X Code to find the best specifications for shielding, solid angles, detectors dimensions and collimation for the Counting System. By simulating several scenarios, each one different from the other, and analyzing the results in the form of Counts Per Second, the ideal counting system's specifications and geometry to measure the activity in the Main Source and the Filter (second source) is chosen. After that, a set of previously activated stainless steel foils were used to reproduce the real experiments' conditions, this real experiment consists of using TLA and the Wearing Apparatus, the results demonstrate that the counting system and methodology are adequate for such experiments.