Viga de concreto armado utilizando garrafas pet
Autor(a) principal: | |
---|---|
Data de Publicação: | 2016 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório do Instituto Federal do Amapá |
Texto Completo: | http://repositorio.ifap.edu.br:8080/jspui/handle/prefix/441 |
Resumo: | The use of PET bottle in civil construction became very common, considering that can be used in walls construction, making of tiles, among others. There are already many studies where it was found the use of PET bottle as component of structure or of construction itself and show satisfactory results. The optimization at execution of pieces in reinforced concrete aiming ensure reduction of own weight, as well as, reduction of materials employed and consequently the reduction of the cost, it’s a case requires a attention at civil construction area. The hollow or empty beams are a good alternative for this optimization, so in this study it were tested at Civil Engineering Laboratory of Federal University of Pará 4 beams with section of (120 x 400) mm² and 2200 mm of length, being 1 massive for reference and 3 of them with empty area: the first (Beam B1) using one line of PET bottle of 600 ml lying, the second (Beam B2) with two lines of PET bottle lying (one bottle over the other) and the third (Beam B3) with three lines of bottles lying (also one over the other) all disposed longitudinally in the beam. It was studied the presence of armor of shear and the model test Stuttgart and was performed the comparison of load capacity between the tested beams. Hollow beams showed behavior near to reference beam. There was a reduction of volume and consequently of weight between the beams BR and B3 of nearly 15,3% and a loss of resistance to shear between the same beams of nearly 26,3%. The tests results were compared with the NBR 6118 (2014) recommendations and it was found a nearness between the results. |
id |
IFAP-2_dfd22e45b21056a319c095bd0f5b1309 |
---|---|
oai_identifier_str |
oai:repositorio.ifap.edu.br:prefix/441 |
network_acronym_str |
IFAP-2 |
network_name_str |
Repositório do Instituto Federal do Amapá |
repository_id_str |
|
spelling |
Viga de concreto armado utilizando garrafas petViga - concreto armadoCisalhamento - vigasGarrafas pet - sustentabilidadeCNPQ::ENGENHARIAS::ENGENHARIA CIVILThe use of PET bottle in civil construction became very common, considering that can be used in walls construction, making of tiles, among others. There are already many studies where it was found the use of PET bottle as component of structure or of construction itself and show satisfactory results. The optimization at execution of pieces in reinforced concrete aiming ensure reduction of own weight, as well as, reduction of materials employed and consequently the reduction of the cost, it’s a case requires a attention at civil construction area. The hollow or empty beams are a good alternative for this optimization, so in this study it were tested at Civil Engineering Laboratory of Federal University of Pará 4 beams with section of (120 x 400) mm² and 2200 mm of length, being 1 massive for reference and 3 of them with empty area: the first (Beam B1) using one line of PET bottle of 600 ml lying, the second (Beam B2) with two lines of PET bottle lying (one bottle over the other) and the third (Beam B3) with three lines of bottles lying (also one over the other) all disposed longitudinally in the beam. It was studied the presence of armor of shear and the model test Stuttgart and was performed the comparison of load capacity between the tested beams. Hollow beams showed behavior near to reference beam. There was a reduction of volume and consequently of weight between the beams BR and B3 of nearly 15,3% and a loss of resistance to shear between the same beams of nearly 26,3%. The tests results were compared with the NBR 6118 (2014) recommendations and it was found a nearness between the results.A utilização da garrafa PET na construção civil, tornou-se muito comum, haja vista, que pode ser utilizada na construção de paredes, confecção de telhas, entre outros. Já existem muitos estudos onde verificou-se a utilização da garrafa PET como componente da estrutura ou da construção em si e que mostram resultados satisfatórios. A otimização na execução de peças em concreto armado visando garantir redução de peso próprio, bem como, a redução de materiais empregados e consequentemente a redução do custo, é um caso que requer uma atenção na área da construção civil. As vigas ocas ou vazadas são uma boa alternativa para esta otimização, portanto neste trabalho foram ensaiadas no Laboratório de Engenharia Civil da Universidade Federal do Pará 4 vigas com seção de (120 x 400) mm² e 2200 mm de comprimento, sendo 1 maciça para referência e 3 delas com área vazada: a primeira (Viga V1) utilizando-se um linha de garrafa PET de 600 ml deitada, a segunda (Viga V2) com duas linhas de garrafa PET deitadas (uma garrafa sobre a outra) e a terceira (Viga V3) com três linhas de garrafas deitadas (também uma sobre a outra) todas dispostas longitudinalmente na viga. Foi estudada a presença de armadura de cisalhamento, o modelo de ensaio Stuttgart e foi realizada a comparação da capacidade de carga entre as vigas ensaiadas. Vigas ocas ou vazadas apresentaram comportamento próximo a viga de referência. Houve uma redução de volume e consequentemente de peso entre as Vigas VR e V3 de aproximadamente 15,3% e uma perda de resistência ao cisalhamento entre as mesmas vigas de aproximadamente 26,3%. Os resultados dos ensaios foram comparados com as recomendações da NBR 6118 (2014) e verificou-se uma proximidade entre os resultados.Universidade Federal do ParáBrasilPós-Graduação em Processos Construtivos e Saneamento UrbanoUFPAOLIVEIRA, Dênio Ramam Carvalho dehttps://orcid.org/0000-0001-8254-4551http://lattes.cnpq.br/1324105476558186SOBRAL, Alexandre Salomão Barile2021-09-10T21:33:46Z2021-09-102021-09-10T21:33:46Z2016-03-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisSOBRAL, Alexandre Salomão Barile. Viga de concreto armado utilizando garrafas pet. 2016. 65f. Dissertação (Mestrado em Processos Construtivos e Saneamento Urbano) – Instituto de Tecnologia, Universidade Federal do Pará, Belém, PA, 2016.http://repositorio.ifap.edu.br:8080/jspui/handle/prefix/441porAtribuição-NãoComercial-SemDerivados 3.0 Brasilhttp://creativecommons.org/licenses/by-nc-nd/3.0/br/info:eu-repo/semantics/openAccessreponame:Repositório do Instituto Federal do Amapáinstname:Instituto Federal de Educação, Ciência e Tecnologia do Amapá (IFAP)instacron:IFAP2021-09-10T21:33:46Zoai:repositorio.ifap.edu.br:prefix/441Repositório InstitucionalPUBhttp://repositorio.ifap.edu.br/oai/requestsuzana.cardoso@ifap.edu.bropendoar:2021-09-10T21:33:46Repositório do Instituto Federal do Amapá - Instituto Federal de Educação, Ciência e Tecnologia do Amapá (IFAP)false |
dc.title.none.fl_str_mv |
Viga de concreto armado utilizando garrafas pet |
title |
Viga de concreto armado utilizando garrafas pet |
spellingShingle |
Viga de concreto armado utilizando garrafas pet SOBRAL, Alexandre Salomão Barile Viga - concreto armado Cisalhamento - vigas Garrafas pet - sustentabilidade CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Viga de concreto armado utilizando garrafas pet |
title_full |
Viga de concreto armado utilizando garrafas pet |
title_fullStr |
Viga de concreto armado utilizando garrafas pet |
title_full_unstemmed |
Viga de concreto armado utilizando garrafas pet |
title_sort |
Viga de concreto armado utilizando garrafas pet |
author |
SOBRAL, Alexandre Salomão Barile |
author_facet |
SOBRAL, Alexandre Salomão Barile |
author_role |
author |
dc.contributor.none.fl_str_mv |
OLIVEIRA, Dênio Ramam Carvalho de https://orcid.org/0000-0001-8254-4551 http://lattes.cnpq.br/1324105476558186 |
dc.contributor.author.fl_str_mv |
SOBRAL, Alexandre Salomão Barile |
dc.subject.por.fl_str_mv |
Viga - concreto armado Cisalhamento - vigas Garrafas pet - sustentabilidade CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
topic |
Viga - concreto armado Cisalhamento - vigas Garrafas pet - sustentabilidade CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The use of PET bottle in civil construction became very common, considering that can be used in walls construction, making of tiles, among others. There are already many studies where it was found the use of PET bottle as component of structure or of construction itself and show satisfactory results. The optimization at execution of pieces in reinforced concrete aiming ensure reduction of own weight, as well as, reduction of materials employed and consequently the reduction of the cost, it’s a case requires a attention at civil construction area. The hollow or empty beams are a good alternative for this optimization, so in this study it were tested at Civil Engineering Laboratory of Federal University of Pará 4 beams with section of (120 x 400) mm² and 2200 mm of length, being 1 massive for reference and 3 of them with empty area: the first (Beam B1) using one line of PET bottle of 600 ml lying, the second (Beam B2) with two lines of PET bottle lying (one bottle over the other) and the third (Beam B3) with three lines of bottles lying (also one over the other) all disposed longitudinally in the beam. It was studied the presence of armor of shear and the model test Stuttgart and was performed the comparison of load capacity between the tested beams. Hollow beams showed behavior near to reference beam. There was a reduction of volume and consequently of weight between the beams BR and B3 of nearly 15,3% and a loss of resistance to shear between the same beams of nearly 26,3%. The tests results were compared with the NBR 6118 (2014) recommendations and it was found a nearness between the results. |
publishDate |
2016 |
dc.date.none.fl_str_mv |
2016-03-30 2021-09-10T21:33:46Z 2021-09-10 2021-09-10T21:33:46Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SOBRAL, Alexandre Salomão Barile. Viga de concreto armado utilizando garrafas pet. 2016. 65f. Dissertação (Mestrado em Processos Construtivos e Saneamento Urbano) – Instituto de Tecnologia, Universidade Federal do Pará, Belém, PA, 2016. http://repositorio.ifap.edu.br:8080/jspui/handle/prefix/441 |
identifier_str_mv |
SOBRAL, Alexandre Salomão Barile. Viga de concreto armado utilizando garrafas pet. 2016. 65f. Dissertação (Mestrado em Processos Construtivos e Saneamento Urbano) – Instituto de Tecnologia, Universidade Federal do Pará, Belém, PA, 2016. |
url |
http://repositorio.ifap.edu.br:8080/jspui/handle/prefix/441 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Atribuição-NãoComercial-SemDerivados 3.0 Brasil http://creativecommons.org/licenses/by-nc-nd/3.0/br/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Atribuição-NãoComercial-SemDerivados 3.0 Brasil http://creativecommons.org/licenses/by-nc-nd/3.0/br/ |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Federal do Pará Brasil Pós-Graduação em Processos Construtivos e Saneamento Urbano UFPA |
publisher.none.fl_str_mv |
Universidade Federal do Pará Brasil Pós-Graduação em Processos Construtivos e Saneamento Urbano UFPA |
dc.source.none.fl_str_mv |
reponame:Repositório do Instituto Federal do Amapá instname:Instituto Federal de Educação, Ciência e Tecnologia do Amapá (IFAP) instacron:IFAP |
instname_str |
Instituto Federal de Educação, Ciência e Tecnologia do Amapá (IFAP) |
instacron_str |
IFAP |
institution |
IFAP |
reponame_str |
Repositório do Instituto Federal do Amapá |
collection |
Repositório do Instituto Federal do Amapá |
repository.name.fl_str_mv |
Repositório do Instituto Federal do Amapá - Instituto Federal de Educação, Ciência e Tecnologia do Amapá (IFAP) |
repository.mail.fl_str_mv |
suzana.cardoso@ifap.edu.br |
_version_ |
1798311981579501568 |