Model of single-sized endotracheal tube for adults

• Autor(a) principal: Calderon,Luiz Guilherme
• Data de Publicação: 2020
• Outros Autores: Moreira,Marcos Mello, Barreto,Gilson, Tincani,Alfio José
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Einstein (São Paulo)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1679-45082020000100204
• topic: Airway resistance; Intubation, intratracheal; Tracheal intubation; Flow rate

ABSTRACT Objective To simulate different diameters of endotracheal tubes and to verify the fluid dynamics aspects by means of flow and resistance measurements. Methods Fluid dynamics software was used to calculate mean flow and airway resistance in endotracheal tube with a diameter of 6.0, 7.0, 7.5, 8.0, 9.0 and 10.0mm at normal body temperature and under constant pressure. The same measurements were taken in the fusion of the first 22cm of a 9.0mm endotracheal tube with 10.0mm diameter, and with the end part in 12cm of a 6.0mm endotracheal tube with 7.0mm diameter. Results The fusion of the first 22cm of an endotracheal tube of 10.0mm diameter with the terminal part in 12cm of an endotracheal tube of 6.0mm diameter, preserving the total length of 34cm, generated average flow and airway resistance similar to that of a conventional 7.5mm endotracheal tube. Conclusion This simulation study demonstrates that a single-sized endotracheal tube may facilitate endotracheal intubation without causing increased airway resistance.