Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da Uninove |
Texto Completo: | http://bibliotecatede.uninove.br/tede/handle/tede/204 |
Resumo: | In the machining industries in general to manufacture small internal threads is a trivial task and often the last operation to be performed. Currently the machining tool called tapping tool is practically the only resource for manufacturing small internal threads. Due to the limitations intrinsic to its application, there are few technological advances in recent years compared to other manufacturing processes for machining. Recent advances are limited to, in general, the type of coating material, the type of cutting angles applied in machine tools and adoption as carbide tool material. In order to contribute to the topic, this study aims to make an analysis economic viability of the operation with tapping tools after applying a metal conditioner on its surface, which is a synthetic liquid whose primary function is to reduce the friction between metals, checking the cost / benefit relationship of this procedure. For this, was used a workpiece with 37 threads each and the end of the tool s life was determined by a non-pass caliper or broken down. Two conditions were analyzed, the first being the normal condition and the second with the application of the metal conditioner on the surface of the tool. Statistics techniques were applied to verify the reliability of each test. The test results demonstrate increased tool s life in threading operation with tapping tools, reducing production costs and a higher cost-benefit relation when used metal conditioner. |
id |
NOVE_9aee74b9a3e428baec1bf17b4f5cb131 |
---|---|
oai_identifier_str |
oai:localhost:tede/204 |
network_acronym_str |
NOVE |
network_name_str |
Biblioteca Digital de Teses e Dissertações da Uninove |
repository_id_str |
|
spelling |
Baptista, Elesandro Antoniohttp://lattes.cnpq.br/5919942925510483Ribeiro, Marcos Valériohttp://lattes.cnpq.br/2001862427592659Vieira Júnior, Miltonhttp://lattes.cnpq.br/0921218077863198CPF:11466043365http://lattes.cnpq.br/6183501240657541Silva, Edson Nunes da2015-04-07T21:10:36Z2014-05-122014-01-28SILVA, Edson Nunes da. Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico. 2014. 101 f. Dissertação (Mestrado em Engenharia) - Universidade Nove de Julho, São Paulo, 2014.http://bibliotecatede.uninove.br/tede/handle/tede/204In the machining industries in general to manufacture small internal threads is a trivial task and often the last operation to be performed. Currently the machining tool called tapping tool is practically the only resource for manufacturing small internal threads. Due to the limitations intrinsic to its application, there are few technological advances in recent years compared to other manufacturing processes for machining. Recent advances are limited to, in general, the type of coating material, the type of cutting angles applied in machine tools and adoption as carbide tool material. In order to contribute to the topic, this study aims to make an analysis economic viability of the operation with tapping tools after applying a metal conditioner on its surface, which is a synthetic liquid whose primary function is to reduce the friction between metals, checking the cost / benefit relationship of this procedure. For this, was used a workpiece with 37 threads each and the end of the tool s life was determined by a non-pass caliper or broken down. Two conditions were analyzed, the first being the normal condition and the second with the application of the metal conditioner on the surface of the tool. Statistics techniques were applied to verify the reliability of each test. The test results demonstrate increased tool s life in threading operation with tapping tools, reducing production costs and a higher cost-benefit relation when used metal conditioner.Nas indústrias manufatureiras em geral a fabricação de roscas internas de pequenos diâmetros é uma tarefa corriqueira e, por vezes, a última operação de usinagem a ser realizada. Atualmente a ferramenta de usinagem denominada macho de roscar é praticamente o único recurso para a fabricação de roscas internas de pequenos diâmetros. Devido às limitações intrínsecas a sua aplicação, são poucos os avanços tecnológicos obtidos nos últimos anos quando comparados com outros processos de fabricação por usinagem. Os recentes avanços limitam-se, em geral, ao tipo de recobrimento do material, aos tipos de ângulos de corte aplicados em macho de roscar e a adoção do metal duro como material da ferramenta. Com o intuito de contribuir com o tema, o presente trabalho fez uma análise da viabilidade econômica da operação de rosquear com machos de roscar após a aplicação de um condicionador metálico, que é um líquido sintético cuja principal função é reduzir o atrito entre os metais, verificando a relação custo x benefício de tal procedimento. Para isto, foi adotada uma peça padrão com 37 roscas e o fim de vida de cada macho foi determinado por meio do uso de um calibrador passa-não-passa ou por quebra catastrófica. Foram analisadas duas condições de trabalho, sendo a primeira a condição normal e a segunda com a aplicação do condicionador metálico na superfície do macho. Foram aplicadas técnicas estatísticas no planejamento de experimentos para a verificação da confiança de cada ensaio. Os resultados obtidos demonstram aumento da vida na operação de roscar com machos de roscar, redução dos custos produtivos e uma relação custo x benefício superior quando utilizado o condicionador metálico.Made available in DSpace on 2015-04-07T21:10:36Z (GMT). No. of bitstreams: 1 B_Edson Nunes da Silva.pdf: 1493879 bytes, checksum: 062f034aae14ed2137b34294820d4d91 (MD5) Previous issue date: 2014-01-28application/pdfporUniversidade Nove de JulhoPrograma de Pós-Graduação de Mestrado e Doutorado em Engenharia de ProduçãoUninoveBREngenhariaUsinagemViabilidade econômicaFabricaçãoRosqueamentoMachiningEconomic ViabilityManufacturingThreadENGENHARIAS::ENGENHARIA DE PRODUCAOViabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálicoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis2551182063231974631600info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da Uninoveinstname:Universidade Nove de Julho (UNINOVE)instacron:UNINOVEORIGINALB_Edson Nunes da Silva.pdfapplication/pdf1493879http://localhost:8080/tede/bitstream/tede/204/1/B_Edson+Nunes+da+Silva.pdf062f034aae14ed2137b34294820d4d91MD51tede/2042022-06-03 17:44:50.466oai:localhost:tede/204Biblioteca Digital de Teses e Dissertaçõeshttp://bibliotecatede.uninove.br/PRIhttp://bibliotecatede.uninove.br/oai/requestbibliotecatede@uninove.br||bibliotecatede@uninove.bropendoar:2022-06-03T20:44:50Biblioteca Digital de Teses e Dissertações da Uninove - Universidade Nove de Julho (UNINOVE)false |
dc.title.por.fl_str_mv |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
title |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
spellingShingle |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico Silva, Edson Nunes da Usinagem Viabilidade econômica Fabricação Rosqueamento Machining Economic Viability Manufacturing Thread ENGENHARIAS::ENGENHARIA DE PRODUCAO |
title_short |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
title_full |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
title_fullStr |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
title_full_unstemmed |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
title_sort |
Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico |
author |
Silva, Edson Nunes da |
author_facet |
Silva, Edson Nunes da |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Baptista, Elesandro Antonio |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/5919942925510483 |
dc.contributor.referee1.fl_str_mv |
Ribeiro, Marcos Valério |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/2001862427592659 |
dc.contributor.referee2.fl_str_mv |
Vieira Júnior, Milton |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/0921218077863198 |
dc.contributor.authorID.fl_str_mv |
CPF:11466043365 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/6183501240657541 |
dc.contributor.author.fl_str_mv |
Silva, Edson Nunes da |
contributor_str_mv |
Baptista, Elesandro Antonio Ribeiro, Marcos Valério Vieira Júnior, Milton |
dc.subject.por.fl_str_mv |
Usinagem Viabilidade econômica Fabricação Rosqueamento |
topic |
Usinagem Viabilidade econômica Fabricação Rosqueamento Machining Economic Viability Manufacturing Thread ENGENHARIAS::ENGENHARIA DE PRODUCAO |
dc.subject.eng.fl_str_mv |
Machining Economic Viability Manufacturing Thread |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA DE PRODUCAO |
description |
In the machining industries in general to manufacture small internal threads is a trivial task and often the last operation to be performed. Currently the machining tool called tapping tool is practically the only resource for manufacturing small internal threads. Due to the limitations intrinsic to its application, there are few technological advances in recent years compared to other manufacturing processes for machining. Recent advances are limited to, in general, the type of coating material, the type of cutting angles applied in machine tools and adoption as carbide tool material. In order to contribute to the topic, this study aims to make an analysis economic viability of the operation with tapping tools after applying a metal conditioner on its surface, which is a synthetic liquid whose primary function is to reduce the friction between metals, checking the cost / benefit relationship of this procedure. For this, was used a workpiece with 37 threads each and the end of the tool s life was determined by a non-pass caliper or broken down. Two conditions were analyzed, the first being the normal condition and the second with the application of the metal conditioner on the surface of the tool. Statistics techniques were applied to verify the reliability of each test. The test results demonstrate increased tool s life in threading operation with tapping tools, reducing production costs and a higher cost-benefit relation when used metal conditioner. |
publishDate |
2014 |
dc.date.available.fl_str_mv |
2014-05-12 |
dc.date.issued.fl_str_mv |
2014-01-28 |
dc.date.accessioned.fl_str_mv |
2015-04-07T21:10:36Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SILVA, Edson Nunes da. Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico. 2014. 101 f. Dissertação (Mestrado em Engenharia) - Universidade Nove de Julho, São Paulo, 2014. |
dc.identifier.uri.fl_str_mv |
http://bibliotecatede.uninove.br/tede/handle/tede/204 |
identifier_str_mv |
SILVA, Edson Nunes da. Viabilidade econômica em processos de rosqueamento utilizando machos de roscar com condicionador metálico. 2014. 101 f. Dissertação (Mestrado em Engenharia) - Universidade Nove de Julho, São Paulo, 2014. |
url |
http://bibliotecatede.uninove.br/tede/handle/tede/204 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
2551182063231974631 |
dc.relation.confidence.fl_str_mv |
600 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Nove de Julho |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação de Mestrado e Doutorado em Engenharia de Produção |
dc.publisher.initials.fl_str_mv |
Uninove |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia |
publisher.none.fl_str_mv |
Universidade Nove de Julho |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da Uninove instname:Universidade Nove de Julho (UNINOVE) instacron:UNINOVE |
instname_str |
Universidade Nove de Julho (UNINOVE) |
instacron_str |
UNINOVE |
institution |
UNINOVE |
reponame_str |
Biblioteca Digital de Teses e Dissertações da Uninove |
collection |
Biblioteca Digital de Teses e Dissertações da Uninove |
bitstream.url.fl_str_mv |
http://localhost:8080/tede/bitstream/tede/204/1/B_Edson+Nunes+da+Silva.pdf |
bitstream.checksum.fl_str_mv |
062f034aae14ed2137b34294820d4d91 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da Uninove - Universidade Nove de Julho (UNINOVE) |
repository.mail.fl_str_mv |
bibliotecatede@uninove.br||bibliotecatede@uninove.br |
_version_ |
1811016860010807296 |