Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união
Autor(a) principal: | |
---|---|
Data de Publicação: | 2006 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional PUCRS |
Texto Completo: | http://hdl.handle.net/10923/362 |
Resumo: | The purpose of this study was to evaluate, in vitro, the influence of Nd:YAG laser in bond strength of the Single Bond 2 and Clearfil SE Bond adhesive systems to dentin, as well as durability of such bond, and superficial topography of the laser irradiated dentin. A flat occlusal surface was obtained in extracted third human molars being it regulated with 320, 400 and 600 grit silicon carbide sandpaper, respectively. Teeth were randomly divided in 8 groups: Group 1 - Single Bond 2; Group 2 - Clearfil SE Bond; Group 3 – laser and Single Bond 2; Group 4 – laser and Clearfil SE Bond. Nd:YAG laser was applied in dentin previously to adhesive system in the following parameters: 60mJ, 15Hz and 0,9W. After applying adhesive systems, composite resin blocks with 6 mm height were built. Samples from these groups were stored in distilled water at 37º C for 24 hours. Samples from Groups 5, 6, 7 and 8 were identical to Groups 1, 2, 3 and 4, respectively, being stored in distilled water at 37º C for 7 months. After storage period, groups of tooth/resin were cut in a parallel way along the tooth axis in buccal-lingual and mesio-distal directions with cut of approximately 0,7 mm. It was obtained 25 specimens for each group, being, then, submitted to microtensile bond strength on a universal testing machine at a crosshead speed of 0,5mm/min. Superficial topography of dentin with laser application was observed in MEV. According to Variance Analysis and Tukey test (a=0,05), group 1 (Single Bond 2, 24 h = 19,79 MPa), group 5 (Single Bond 2, 7 months = 21,58 MPa), and group 7 (Single Bond 2, with laser, 7 months = 17,80 MPa) did not differ statistically amongst and were statistically higher than all Clearfil SE Bond groups. For Single Bond 2, the lowest mean was obtained by group 3 (Single Bond 2, with laser, 24 hours = 12,44 MPa), not statistically differing from group 7 (Single Bond 2, with laser, 7 months). The lowest means were obtained with Clearfil SE Bond groups, which did not statistically differ amongst, being obtained the following means: group 2 (11,39 MPa), group 4 (10,60 MPa), group 6 (11,16 MPa) and group 8 (9,56 MPa). According to analysis in MEV, Nd:YAG laser altered dentin superficial topography. It was concluded that Nd:YAG laser significantly reduced resistance to microtensile bond strength only for Single Bond 2 adhesive system when stored for 24 hours, and that laser did not significantly implicate bond durability in a period of 7 months for tested adhesive systems. |
id |
PUCR_8f4567e52867eafc990650bfbf48367f |
---|---|
oai_identifier_str |
oai:repositorio.pucrs.br:10923/362 |
network_acronym_str |
PUCR |
network_name_str |
Repositório Institucional PUCRS |
repository_id_str |
|
spelling |
Heredia, Alexandre RodriguezSpohr, Ana Maria2011-12-27T14:14:00Z2011-12-27T14:14:00Z2006http://hdl.handle.net/10923/362The purpose of this study was to evaluate, in vitro, the influence of Nd:YAG laser in bond strength of the Single Bond 2 and Clearfil SE Bond adhesive systems to dentin, as well as durability of such bond, and superficial topography of the laser irradiated dentin. A flat occlusal surface was obtained in extracted third human molars being it regulated with 320, 400 and 600 grit silicon carbide sandpaper, respectively. Teeth were randomly divided in 8 groups: Group 1 - Single Bond 2; Group 2 - Clearfil SE Bond; Group 3 – laser and Single Bond 2; Group 4 – laser and Clearfil SE Bond. Nd:YAG laser was applied in dentin previously to adhesive system in the following parameters: 60mJ, 15Hz and 0,9W. After applying adhesive systems, composite resin blocks with 6 mm height were built. Samples from these groups were stored in distilled water at 37º C for 24 hours. Samples from Groups 5, 6, 7 and 8 were identical to Groups 1, 2, 3 and 4, respectively, being stored in distilled water at 37º C for 7 months. After storage period, groups of tooth/resin were cut in a parallel way along the tooth axis in buccal-lingual and mesio-distal directions with cut of approximately 0,7 mm. It was obtained 25 specimens for each group, being, then, submitted to microtensile bond strength on a universal testing machine at a crosshead speed of 0,5mm/min. Superficial topography of dentin with laser application was observed in MEV. According to Variance Analysis and Tukey test (a=0,05), group 1 (Single Bond 2, 24 h = 19,79 MPa), group 5 (Single Bond 2, 7 months = 21,58 MPa), and group 7 (Single Bond 2, with laser, 7 months = 17,80 MPa) did not differ statistically amongst and were statistically higher than all Clearfil SE Bond groups. For Single Bond 2, the lowest mean was obtained by group 3 (Single Bond 2, with laser, 24 hours = 12,44 MPa), not statistically differing from group 7 (Single Bond 2, with laser, 7 months). The lowest means were obtained with Clearfil SE Bond groups, which did not statistically differ amongst, being obtained the following means: group 2 (11,39 MPa), group 4 (10,60 MPa), group 6 (11,16 MPa) and group 8 (9,56 MPa). According to analysis in MEV, Nd:YAG laser altered dentin superficial topography. It was concluded that Nd:YAG laser significantly reduced resistance to microtensile bond strength only for Single Bond 2 adhesive system when stored for 24 hours, and that laser did not significantly implicate bond durability in a period of 7 months for tested adhesive systems.O objetivo desse estudo foi avaliar, in vitro, a influência do laser de Nd:YAG na resistência de união dos sistemas adesivos Single Bond 2 e Clearfil SE Bond sobre a dentina, assim como a longevidade desta união e a topografia superficial da dentina irradiada com o laser. Em terceiros molares humanos extraídos foi obtida uma superfície oclusal plana em dentina, sendo a mesma regularizada com lixas de carbeto de silício de granulação 320, 400 e 600, respectivamente. Os dentes foram divididos aleatoriamente em 8 grupos: Grupo 1 - Single Bond 2; Grupo 2 - Clearfil SE Bond; Grupo 3 – laser e Single Bond 2; Grupo 4 – laser e Clearfil SE Bond. O laser de Nd:YAG foi aplicado na dentina previamente ao sistema adesivo nos seguintes parâmetros: 60 mJ, 15 Hz e 0,9 W. Após a aplicação dos sistemas adesivos, foram construídos blocos de resina composta com 6 mm de altura. As amostras destes grupos foram armazenadas em água destilada a 37º C por 24 horas. As amostras dos Grupos 5, 6, 7 e 8 foram idênticas as dos Grupos 1, 2, 3 e 4, respectivamente, sendo armazenadas em água destilada a 37º C por 7 meses. Decorrido o período de armazenagem, os conjuntos dente/resina foram cortados paralelamente ao longo eixo do dente, nos sentidos vestíbulo-lingual e mésio-distal, com secção de aproximadamente 0,7 mm. Foram obtidos 25 corpos-de-prova para cada grupo, sendo então submetidos ao teste de resistência à microtração em máquina de ensaio universal com velocidade de 0,5 mm/min.A topografia superficial da dentina com aplicação do laser foi observada em MEV. De acordo com a Análise de Variância e o teste de Tukey (a=0,05), o grupo 1 (Single Bond 2, 24 hs = 19,79 MPa), o grupo 5 (Single Bond 2, 7 meses = 21,58 MPa), e o grupo 7 (Single Bond 2, com laser, 7 meses = 17,80 MPa) não diferiram estatisticamente entre si e foram estatisticamente superiores a todos os grupos do Clearfil SE Bond. Para o Single Bond 2, a menor média foi obtida para o grupo 3 (Single Bond 2, com laser, 24 horas = 12,44 MPa), não diferindo estatisticamente do grupo 7 (Single Bond 2, com laser, 7 meses). As menores médias foram obtidas com os grupos do Clearfil SE Bond, as quais não diferiram estatisticamente entre si, sendo obtidas as seguintes médias: grupo 2 (11,39 MPa), grupo 4 (10,60 MPa), grupo 6 (11,16 MPa) e grupo 8 (9,56 MPa). De acordo com a análise em MEV, o laser de Nd:YAG alterou a topografia superficial da dentina. Concluiu-se que o laser de Nd:YAG reduziu significativamente a resistência à microtração apenas para o sistema adesivo Single Bond 2 quando armazenado por 24 horas, e que o laser não comprometeu significativamente a durabilidade da união no período de 7 meses para os sistemas adesivos testados.Made available in DSpace on 2011-12-27T14:14:00Z (GMT). No. of bitstreams: 2 000386620-0.pdf: 4419256 bytes, checksum: 54dfaa1b101b15fa40cdba9832bc4351 (MD5) license.txt: 581 bytes, checksum: 44ea52f0b7567232681c6e3d72285adc (MD5)Pontifícia Universidade Católica do Rio Grande do SulPorto AlegreODONTOLOGIALASER - ODONTOLOGIAADESIVOS DENTÁRIOSDENTINAAplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de uniãoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisPontifícia Universidade Católica do Rio Grande do SulFaculdade de OdontologiaPrograma de Pós-Graduação em OdontologiaMestrado2006porreponame:Repositório Institucional PUCRSinstname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)instacron:PUC_RSinfo:eu-repo/semantics/openAccessORIGINAL000386620-0.pdfTexto Completoapplication/pdf4419256repositorio.pucrs.br/jspui/bitstream/10923/362/1/000386620-0.pdf54dfaa1b101b15fa40cdba9832bc4351MD51LICENSElicense.txttext/plain581repositorio.pucrs.br/jspui/bitstream/10923/362/2/license.txt44ea52f0b7567232681c6e3d72285adcMD52TEXT000386620-0.pdf.txt000386620-0.pdf.txtExtracted texttext/plain136406repositorio.pucrs.br/jspui/bitstream/10923/362/3/000386620-0.pdf.txtde566e2b0c8d6c06a6187c22d4f8dca3MD5310923/3622017-09-28 11:05:35.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ório InstitucionalPRI |
dc.title.pt_BR.fl_str_mv |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
title |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
spellingShingle |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união Heredia, Alexandre Rodriguez ODONTOLOGIA LASER - ODONTOLOGIA ADESIVOS DENTÁRIOS DENTINA |
title_short |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
title_full |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
title_fullStr |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
title_full_unstemmed |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
title_sort |
Aplicação de sistemas adesivos à dentina irradiada com laser de Nd:YAG: estudo da durabilidade da resistência de união |
author |
Heredia, Alexandre Rodriguez |
author_facet |
Heredia, Alexandre Rodriguez |
author_role |
author |
dc.contributor.author.fl_str_mv |
Heredia, Alexandre Rodriguez |
dc.contributor.advisor1.fl_str_mv |
Spohr, Ana Maria |
contributor_str_mv |
Spohr, Ana Maria |
dc.subject.por.fl_str_mv |
ODONTOLOGIA LASER - ODONTOLOGIA ADESIVOS DENTÁRIOS DENTINA |
topic |
ODONTOLOGIA LASER - ODONTOLOGIA ADESIVOS DENTÁRIOS DENTINA |
description |
The purpose of this study was to evaluate, in vitro, the influence of Nd:YAG laser in bond strength of the Single Bond 2 and Clearfil SE Bond adhesive systems to dentin, as well as durability of such bond, and superficial topography of the laser irradiated dentin. A flat occlusal surface was obtained in extracted third human molars being it regulated with 320, 400 and 600 grit silicon carbide sandpaper, respectively. Teeth were randomly divided in 8 groups: Group 1 - Single Bond 2; Group 2 - Clearfil SE Bond; Group 3 – laser and Single Bond 2; Group 4 – laser and Clearfil SE Bond. Nd:YAG laser was applied in dentin previously to adhesive system in the following parameters: 60mJ, 15Hz and 0,9W. After applying adhesive systems, composite resin blocks with 6 mm height were built. Samples from these groups were stored in distilled water at 37º C for 24 hours. Samples from Groups 5, 6, 7 and 8 were identical to Groups 1, 2, 3 and 4, respectively, being stored in distilled water at 37º C for 7 months. After storage period, groups of tooth/resin were cut in a parallel way along the tooth axis in buccal-lingual and mesio-distal directions with cut of approximately 0,7 mm. It was obtained 25 specimens for each group, being, then, submitted to microtensile bond strength on a universal testing machine at a crosshead speed of 0,5mm/min. Superficial topography of dentin with laser application was observed in MEV. According to Variance Analysis and Tukey test (a=0,05), group 1 (Single Bond 2, 24 h = 19,79 MPa), group 5 (Single Bond 2, 7 months = 21,58 MPa), and group 7 (Single Bond 2, with laser, 7 months = 17,80 MPa) did not differ statistically amongst and were statistically higher than all Clearfil SE Bond groups. For Single Bond 2, the lowest mean was obtained by group 3 (Single Bond 2, with laser, 24 hours = 12,44 MPa), not statistically differing from group 7 (Single Bond 2, with laser, 7 months). The lowest means were obtained with Clearfil SE Bond groups, which did not statistically differ amongst, being obtained the following means: group 2 (11,39 MPa), group 4 (10,60 MPa), group 6 (11,16 MPa) and group 8 (9,56 MPa). According to analysis in MEV, Nd:YAG laser altered dentin superficial topography. It was concluded that Nd:YAG laser significantly reduced resistance to microtensile bond strength only for Single Bond 2 adhesive system when stored for 24 hours, and that laser did not significantly implicate bond durability in a period of 7 months for tested adhesive systems. |
publishDate |
2006 |
dc.date.issued.fl_str_mv |
2006 |
dc.date.accessioned.fl_str_mv |
2011-12-27T14:14:00Z |
dc.date.available.fl_str_mv |
2011-12-27T14:14:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10923/362 |
url |
http://hdl.handle.net/10923/362 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul Porto Alegre |
publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul Porto Alegre |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional PUCRS instname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) instacron:PUC_RS |
instname_str |
Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) |
instacron_str |
PUC_RS |
institution |
PUC_RS |
reponame_str |
Repositório Institucional PUCRS |
collection |
Repositório Institucional PUCRS |
bitstream.url.fl_str_mv |
repositorio.pucrs.br/jspui/bitstream/10923/362/1/000386620-0.pdf repositorio.pucrs.br/jspui/bitstream/10923/362/2/license.txt repositorio.pucrs.br/jspui/bitstream/10923/362/3/000386620-0.pdf.txt |
bitstream.checksum.fl_str_mv |
54dfaa1b101b15fa40cdba9832bc4351 44ea52f0b7567232681c6e3d72285adc de566e2b0c8d6c06a6187c22d4f8dca3 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
|
repository.mail.fl_str_mv |
|
_version_ |
1731736511464865792 |