Influência do acabamento de preparos para coroas totais com microscópio operatório na adaptação marginal de restaurações em cerâmica tipo CAD-CAM

• Autor(a) principal: Oliveira, José Pedro Peixoto de
• Data de Publicação: 2008
• Tipo de documento: Tese
• Idioma: por
• Título da fonte: Repositório Institucional PUCRS
• Texto Completo: http://hdl.handle.net/10923/444
• topic: ODONTOLOGIA; MATERIAIS DENTÁRIOS; CERÂMICA DENTÁRIA; PRÓTESE DENTÁRIA; MICROSCÓPIOS; CAD/CAM - COMPUTAÇÃO; COROAS (ODONTOLOGIA)

This study assessed the marginal adaptation of full crown Lava (3M/ESPE) zirconium infrastructure under three different finishing instruments. Thirty human premolars, extracted for therapeutic reasons, were fixed in acrylic resin platforms. The teeth were randomly assigned to three groups (n=10) according the proceedings to cut a full crown preparation: Group 1 - diamond bur; Group 2 - diamond bur and 12-bladed finishing bur; Group 3 - diamond bur and a 12-bladed finishing bur under a 12. 5 X magnification operating microscope. Impressions were taken with an addition silicone material and dies were formed with a special stone. The dies were sent to 3M/ESPE laboratory to have a Lava zirconium infrastructure machined to each specimen. The copings were cemented to the corresponding tooth with RelyX Unicem cement. The restored specimens were embedded in acrylic resin and cut mesio distally and buccal lingually. Eight surfaces were observed with a stereomicroscope at x70 and digital images were obtained. The marginal adaptation measurements were carried out in the Image Tool program. According to ANOVA and Tukey´s test (α=0. 05), there was no statistic difference between Group 1 (88. 601 μm) and Group 2 (90. 946 μm). The lowest mean was obtained for Group 3 (58. 497 μm), and this mean was statistically different than those groups. It was concluded that the operating microscope provided better marginal adaptation of the Lava copings.