Resina epóxi aplicada a capacitores : influência de diferentes agentes de cura

• Autor(a) principal: Silva, Rafael Bitello
• Data de Publicação: 2018
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: Biblioteca Digital de Teses e Dissertações da PUC_RS
• Texto Completo: http://tede2.pucrs.br/tede2/handle/tede/8320
• topic: Epóxi; Agente de Cura; Cinética; Capacitor de Filme; Poxy; Curing Agent; Kinetic; Film Capacitor; ENGENHARIAS

In this study the influence of different commercial curing agents of epoxy resin on film capacitors encapsulation was evaluated. A formulation with DGEBA epoxy resin was used with three different curing agent types: anhydride base, aliphatic amine base and polyamidoamine base. The curing reaction kinetic analysis of each epoxy system was performed by Osawa dynamic method by DSC according ASTM E968. The thermal properties of the epoxy systems were checked by TGA and DSC while the mechanical properties were measured by Shore D hardness and IZOD impact strength, also the a characterization by SEM was performed. The epoxy systems performance in capacitor was verified by qualification tests for film capacitors for automotive application based in AEC-Q200 D, as: exposure to the maximum capacitor operating temperture, exposure to thermal cycles and exposure to humidity. The capacitors were characterized by the capacitance variation while the effects in the epoxy systems were checked by their thermal and mechanical properties change. The systems based on aliphatic amine and polyamidoamine had lower activation energy and higher reaction velocity than the anhydride system. The performance of the capacitor against humidity was similar between the evaluated systems showing low loss of capacitance after the test, whereas against thermal cycles, even the aliphatic amine and polyamidoamine base systems were not affected by reduction of mechanical properties, they had their performance affected by cracks arising. Regarding the performance under exposure to the maximum operating temperature, the anhydride system presented the lowest capacitance loss in the capacitor, followed by the samples with polyamidoamine and aliphatic amine, respectively, which showed a significant reduction of the mechanical properties after prolonged exposure to the temperature of the test.