Viscosity and density of two 1-Alkyl-3-methyl-imidazolium triflate ionic liquids at high pressures: experimental measurements and the effect of alkyl chain length

• Autor(a) principal: Sequeira, Maria Carolina
• Data de Publicação: 2021
• Outros Autores: Avelino, Helena Maria Da Nóbrega Teixeira, Caetano, Fernando J. P., Fareleira, João
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.21/13383
• topic: Viscosity measurements; Ionic liquids; Anton Paar HP; Alkyl substituents

New measurements of the viscosity of 1-butyl-3-methylimidazolium triflate ([BMIM][ OTf]) and 1-hexyl-3-methyl-imidazolium triflate ([HMIM][OTf]) have been carried out at high pressures, using a vibrating-wire technique operated in the forced mode of oscillation. The measurements for [BMIM][OTf] have been performed along six isotherms from 298 to 358 K at pressures up to 50 MPa. The viscosity measurements for [HMIM][OTf] have been carried out along five isotherms from 303 to 358 K at pressures up to 50 MPa. The estimated uncertainty of the measurements is less than U(eta) = 0.02.eta for viscosities up to 68 mPa.s and less than U(eta) = 0.026.eta for higher viscosities, with a confidence level of 0.95 (k = 2). For both ionic liquids, complementary density measurements have been performed using an Anton Paar HP densimeter in the same temperature and pressure ranges as those used for the viscosity measurements. The density results have an uncertainty smaller than U(rho) = 0.002.rho with a confidence level of 0.95 (k = 2). The viscosity results were correlated with the density data using a previously described hard-sphere-based technique. The individual correlations are able to describe the viscosity results for each liquid with an uncertainty smaller than the estimated uncertainty of the experimental data. The effect of alkyl substituents on the viscosity and the density of these ionic liquids has been analyzed. For this purpose, previously published results for the viscosity and density of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM][OTf]) have been considered in addition to the data obtained in the present work for [BMIM][OTf] and [HMIM][OTf].