Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding

Detalhes bibliográficos
Autor(a) principal: Ao, S. S.
Data de Publicação: 2022
Outros Autores: Cheng, M. P., Zhang, Wenyi, Oliveira, João Pedro, Manladan, S. M., Zeng, Zhi, Luo, Zhen
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10362/134250
Resumo: (No. U1933129) (No. 18JCQNJC04100, No. 19JCZDJC39000 No. 19YFFCYS00090 UID/00667/2020
id RCAP_0c3a773af2e1a04b484e450d96a54233
oai_identifier_str oai:run.unl.pt:10362/134250
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding304 stainless steelInterlayerIntermetallic compoundsNiTi alloysUltrasonic spot weldingAcoustics and Ultrasonics(No. U1933129) (No. 18JCQNJC04100, No. 19JCZDJC39000 No. 19YFFCYS00090 UID/00667/2020Superelastic NiTi alloy and 304 stainless steel (304 SS) were joined with a Cu interlayer by ultrasonic spot welding (USW) using different welding energy inputs. The surface morphology, interfacial microstructure, mechanical properties, and fracture mechanisms of the dissimilar NiTi/304 SS USWed joints were studied. The results showed that the surface oxidation intensified with increasing ultrasonic welding energy due to mutual rubbing between tools and sheets. The weld interface microstructure exhibited voids or unbonded zones at low energy inputs, while an intimate contact was established at the joining interface when applying a higher energy input of 750 J. With increasing energy input to 750 J, the weld interface shows two interfaces due to the behavior of plastic flow of Cu interlayer. The lap-shear load of the joints first increased, achieving a maximum value of ∼690 N at an energy input of 750 J, and then decreased with further increase in welding energy. Interfacial failure was observed at NiTi/Cu interface at all energy inputs, and no intermetallic compounds were found on the fracture surfaces of both the NiTi/Cu and Cu/304 SS interfaces.DEMI - Departamento de Engenharia Mecânica e IndustrialUNIDEMI - Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e IndustrialRUNAo, S. S.Cheng, M. P.Zhang, WenyiOliveira, João PedroManladan, S. M.Zeng, ZhiLuo, Zhen2022-03-10T23:23:25Z2022-042022-04-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/10362/134250eng0041-624XPURE: 36325634https://doi.org/10.1016/j.ultras.2022.106684info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-03-11T05:12:40Zoai:run.unl.pt:10362/134250Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T03:48:01.689273Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
title Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
spellingShingle Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
Ao, S. S.
304 stainless steel
Interlayer
Intermetallic compounds
NiTi alloys
Ultrasonic spot welding
Acoustics and Ultrasonics
title_short Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
title_full Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
title_fullStr Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
title_full_unstemmed Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
title_sort Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
author Ao, S. S.
author_facet Ao, S. S.
Cheng, M. P.
Zhang, Wenyi
Oliveira, João Pedro
Manladan, S. M.
Zeng, Zhi
Luo, Zhen
author_role author
author2 Cheng, M. P.
Zhang, Wenyi
Oliveira, João Pedro
Manladan, S. M.
Zeng, Zhi
Luo, Zhen
author2_role author
author
author
author
author
author
dc.contributor.none.fl_str_mv DEMI - Departamento de Engenharia Mecânica e Industrial
UNIDEMI - Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial
RUN
dc.contributor.author.fl_str_mv Ao, S. S.
Cheng, M. P.
Zhang, Wenyi
Oliveira, João Pedro
Manladan, S. M.
Zeng, Zhi
Luo, Zhen
dc.subject.por.fl_str_mv 304 stainless steel
Interlayer
Intermetallic compounds
NiTi alloys
Ultrasonic spot welding
Acoustics and Ultrasonics
topic 304 stainless steel
Interlayer
Intermetallic compounds
NiTi alloys
Ultrasonic spot welding
Acoustics and Ultrasonics
description (No. U1933129) (No. 18JCQNJC04100, No. 19JCZDJC39000 No. 19YFFCYS00090 UID/00667/2020
publishDate 2022
dc.date.none.fl_str_mv 2022-03-10T23:23:25Z
2022-04
2022-04-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10362/134250
url http://hdl.handle.net/10362/134250
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 0041-624X
PURE: 36325634
https://doi.org/10.1016/j.ultras.2022.106684
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799138082316877824