Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints

Detalhes bibliográficos
Autor(a) principal: Ferreira Moreira, Raul Domingos
Data de Publicação: 2018
Outros Autores: Oliveira, Vitor, Silva, Filipe Gonçalo Andrade Da, Vilar, R., Moura, Marcelo
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10400.21/9127
Resumo: The influence of laser surface treatments on mode I fracture toughness of carbon fibre reinforced composites bonded joints is addressed in this work. Five different surface treatments considering several combinations of laser fluence and scanning speeds were applied prior to bonding of the adherents, aiming to increase the adhesion and, consequently, the fracture resistance of the bonded joint. Mode I fracture characterisation considering Double Cantilever Beam tests was subsequently performed to assess the influence of the several treatments on the critical fracture toughness under pure mode I loading. A suitable compliance based data reduction scheme was used to obtain the resistance curves as function of the equivalent crack length. It was verified that a laser treatment based on an interference scheme is the most effective surface preparation concerning maximization of the mode I fracture energy. A finite element analysis including cohesive zone modelling was performed to validate the procedure and experimental conclusions.
id RCAP_21999d62b778ec4353d1aec79bee1e58
oai_identifier_str oai:repositorio.ipl.pt:10400.21/9127
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded jointsComposite bonded jointsSurface preparationLaser treatmentFracture toughnessMode I loadingJuntas compostasTenacidade à fraturaThe influence of laser surface treatments on mode I fracture toughness of carbon fibre reinforced composites bonded joints is addressed in this work. Five different surface treatments considering several combinations of laser fluence and scanning speeds were applied prior to bonding of the adherents, aiming to increase the adhesion and, consequently, the fracture resistance of the bonded joint. Mode I fracture characterisation considering Double Cantilever Beam tests was subsequently performed to assess the influence of the several treatments on the critical fracture toughness under pure mode I loading. A suitable compliance based data reduction scheme was used to obtain the resistance curves as function of the equivalent crack length. It was verified that a laser treatment based on an interference scheme is the most effective surface preparation concerning maximization of the mode I fracture energy. A finite element analysis including cohesive zone modelling was performed to validate the procedure and experimental conclusions.ElsevierRCIPLFerreira Moreira, Raul DomingosOliveira, VitorSilva, Filipe Gonçalo Andrade DaVilar, R.Moura, Marcelo2018-12-04T11:00:22Z2018-042018-04-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/10400.21/9127engMOREIRA, R. D. F.; [et al] – Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints. International Journal of Adhesion and Adhesives. ISSN 0143-7496. Vol. 82 (2018), pp. 108-1130143-749610.1016/j.ijadhadh.2018.01.005metadata only accessinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-08-03T09:57:27Zoai:repositorio.ipl.pt:10400.21/9127Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T20:17:46.044905Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
title Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
spellingShingle Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
Ferreira Moreira, Raul Domingos
Composite bonded joints
Surface preparation
Laser treatment
Fracture toughness
Mode I loading
Juntas compostas
Tenacidade à fratura
title_short Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
title_full Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
title_fullStr Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
title_full_unstemmed Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
title_sort Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
author Ferreira Moreira, Raul Domingos
author_facet Ferreira Moreira, Raul Domingos
Oliveira, Vitor
Silva, Filipe Gonçalo Andrade Da
Vilar, R.
Moura, Marcelo
author_role author
author2 Oliveira, Vitor
Silva, Filipe Gonçalo Andrade Da
Vilar, R.
Moura, Marcelo
author2_role author
author
author
author
dc.contributor.none.fl_str_mv RCIPL
dc.contributor.author.fl_str_mv Ferreira Moreira, Raul Domingos
Oliveira, Vitor
Silva, Filipe Gonçalo Andrade Da
Vilar, R.
Moura, Marcelo
dc.subject.por.fl_str_mv Composite bonded joints
Surface preparation
Laser treatment
Fracture toughness
Mode I loading
Juntas compostas
Tenacidade à fratura
topic Composite bonded joints
Surface preparation
Laser treatment
Fracture toughness
Mode I loading
Juntas compostas
Tenacidade à fratura
description The influence of laser surface treatments on mode I fracture toughness of carbon fibre reinforced composites bonded joints is addressed in this work. Five different surface treatments considering several combinations of laser fluence and scanning speeds were applied prior to bonding of the adherents, aiming to increase the adhesion and, consequently, the fracture resistance of the bonded joint. Mode I fracture characterisation considering Double Cantilever Beam tests was subsequently performed to assess the influence of the several treatments on the critical fracture toughness under pure mode I loading. A suitable compliance based data reduction scheme was used to obtain the resistance curves as function of the equivalent crack length. It was verified that a laser treatment based on an interference scheme is the most effective surface preparation concerning maximization of the mode I fracture energy. A finite element analysis including cohesive zone modelling was performed to validate the procedure and experimental conclusions.
publishDate 2018
dc.date.none.fl_str_mv 2018-12-04T11:00:22Z
2018-04
2018-04-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10400.21/9127
url http://hdl.handle.net/10400.21/9127
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv MOREIRA, R. D. F.; [et al] – Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints. International Journal of Adhesion and Adhesives. ISSN 0143-7496. Vol. 82 (2018), pp. 108-113
0143-7496
10.1016/j.ijadhadh.2018.01.005
dc.rights.driver.fl_str_mv metadata only access
info:eu-repo/semantics/openAccess
rights_invalid_str_mv metadata only access
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Elsevier
publisher.none.fl_str_mv Elsevier
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1817551807696601088

Registros relacionados