Effect of the Injection moulding processing conditions on biopolymers final properties

Detalhes bibliográficos
Autor(a) principal: Teixeira, Pedro
Data de Publicação: 2011
Outros Autores: Pontes, A. J., Henriques, Elsa
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/1822/34500
Resumo: This research work intended to study the effect of the main injection moulding parameters in the final properties of biopolymers mouldings. An experimental procedure was carried out in which four biopolymers containing different composition percentages of poly-lactic acid (PLA) and plasticized starch (PLS) were compared with polypropylene (PP). For each material the effect of the processing conditions (mould temperature, injection temperature and holding pressure) on the final properties was discussed and the possibility of using biopolymers as a substitute of PP in household utility products was evaluated.
id RCAP_2292f081d6d49668897d59b3f0729d83
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/34500
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Effect of the Injection moulding processing conditions on biopolymers final propertiesBiopolymersInjection mouldingMechanical properties.This research work intended to study the effect of the main injection moulding parameters in the final properties of biopolymers mouldings. An experimental procedure was carried out in which four biopolymers containing different composition percentages of poly-lactic acid (PLA) and plasticized starch (PLS) were compared with polypropylene (PP). For each material the effect of the processing conditions (mould temperature, injection temperature and holding pressure) on the final properties was discussed and the possibility of using biopolymers as a substitute of PP in household utility products was evaluated.Universidade do MinhoTeixeira, PedroPontes, A. J.Henriques, Elsa20112011-01-01T00:00:00Zconference paperinfo:eu-repo/semantics/publishedVersionapplication/pdfhttp://hdl.handle.net/1822/34500enginfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-05-11T05:36:49Zoai:repositorium.sdum.uminho.pt:1822/34500Portal AgregadorONGhttps://www.rcaap.pt/oai/openairemluisa.alvim@gmail.comopendoar:71602024-05-11T05:36:49Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Effect of the Injection moulding processing conditions on biopolymers final properties
title Effect of the Injection moulding processing conditions on biopolymers final properties
spellingShingle Effect of the Injection moulding processing conditions on biopolymers final properties
Teixeira, Pedro
Biopolymers
Injection moulding
Mechanical properties.
title_short Effect of the Injection moulding processing conditions on biopolymers final properties
title_full Effect of the Injection moulding processing conditions on biopolymers final properties
title_fullStr Effect of the Injection moulding processing conditions on biopolymers final properties
title_full_unstemmed Effect of the Injection moulding processing conditions on biopolymers final properties
title_sort Effect of the Injection moulding processing conditions on biopolymers final properties
author Teixeira, Pedro
author_facet Teixeira, Pedro
Pontes, A. J.
Henriques, Elsa
author_role author
author2 Pontes, A. J.
Henriques, Elsa
author2_role author
author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Teixeira, Pedro
Pontes, A. J.
Henriques, Elsa
dc.subject.por.fl_str_mv Biopolymers
Injection moulding
Mechanical properties.
topic Biopolymers
Injection moulding
Mechanical properties.
description This research work intended to study the effect of the main injection moulding parameters in the final properties of biopolymers mouldings. An experimental procedure was carried out in which four biopolymers containing different composition percentages of poly-lactic acid (PLA) and plasticized starch (PLS) were compared with polypropylene (PP). For each material the effect of the processing conditions (mould temperature, injection temperature and holding pressure) on the final properties was discussed and the possibility of using biopolymers as a substitute of PP in household utility products was evaluated.
publishDate 2011
dc.date.none.fl_str_mv 2011
2011-01-01T00:00:00Z
dc.type.driver.fl_str_mv conference paper
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/1822/34500
url http://hdl.handle.net/1822/34500
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv mluisa.alvim@gmail.com
_version_ 1817544679143505920