Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons

Detalhes bibliográficos
Autor(a) principal: Valente Nabais, Joao
Data de Publicação: 2012
Outros Autores: Roman, Silvia, Gonzalez, Juan, Garcia, Carmen, Ortiz, Angel
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10174/7006
https://doi.org/10.1002/clen.201100009
Resumo: The adsorption of fluoxetine onto activated carbons (ACs) prepared from almond tree pruning by steam and CO2 activation under different temperature conditions (650– 9508C), was studied. In both series increasing the temperature caused an increase in the BET apparent surface area, yielding ACs with SBET up to 870 and 710m2 g 1 after steam and CO2 activation, respectively. Also, a slight widening of the porosity was found in both cases. In order to modify the functionality of the ACs, two of them were impregnated with triethylenediamine (TEDA) prior to the adsorption process, which caused a decrease in the AC apparent surface mainly due to micropore blockage. The fluoxetine adsorption isotherms at 258C showed maximum adsorption capacities between 110 and 224mgg 1. The adsorption isotherms were analyzed using Langmuir and Freundlich models. Although the impregnation reduced the pore volume, it did not cause a decrease in the fluoxetine maximum adsorption capacity, but a modification in the adsorption mechanism was observed.
id RCAP_29f55688b4b7d8a342dd35b5912a599e
oai_identifier_str oai:dspace.uevora.pt:10174/7006
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbonsactivated carbonsadsorptionThe adsorption of fluoxetine onto activated carbons (ACs) prepared from almond tree pruning by steam and CO2 activation under different temperature conditions (650– 9508C), was studied. In both series increasing the temperature caused an increase in the BET apparent surface area, yielding ACs with SBET up to 870 and 710m2 g 1 after steam and CO2 activation, respectively. Also, a slight widening of the porosity was found in both cases. In order to modify the functionality of the ACs, two of them were impregnated with triethylenediamine (TEDA) prior to the adsorption process, which caused a decrease in the AC apparent surface mainly due to micropore blockage. The fluoxetine adsorption isotherms at 258C showed maximum adsorption capacities between 110 and 224mgg 1. The adsorption isotherms were analyzed using Langmuir and Freundlich models. Although the impregnation reduced the pore volume, it did not cause a decrease in the fluoxetine maximum adsorption capacity, but a modification in the adsorption mechanism was observed.Clean – Soil, Air, Water2013-01-03T11:07:19Z2013-01-032012-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://hdl.handle.net/10174/7006http://hdl.handle.net/10174/7006https://doi.org/10.1002/clen.201100009engS. Román, João M. Valente Nabais, J. F. González, C. M. González-García, Angel L. Ortiz, Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons. Clean – Soil, Air, Water 2012, 40 (7), 698–705ndndndndnd252Valente Nabais, JoaoRoman, SilviaGonzalez, JuanGarcia, CarmenOrtiz, Angelinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-01-03T18:46:48Zoai:dspace.uevora.pt:10174/7006Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T01:01:38.183333Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
title Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
spellingShingle Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
Valente Nabais, Joao
activated carbons
adsorption
title_short Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
title_full Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
title_fullStr Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
title_full_unstemmed Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
title_sort Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons
author Valente Nabais, Joao
author_facet Valente Nabais, Joao
Roman, Silvia
Gonzalez, Juan
Garcia, Carmen
Ortiz, Angel
author_role author
author2 Roman, Silvia
Gonzalez, Juan
Garcia, Carmen
Ortiz, Angel
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Valente Nabais, Joao
Roman, Silvia
Gonzalez, Juan
Garcia, Carmen
Ortiz, Angel
dc.subject.por.fl_str_mv activated carbons
adsorption
topic activated carbons
adsorption
description The adsorption of fluoxetine onto activated carbons (ACs) prepared from almond tree pruning by steam and CO2 activation under different temperature conditions (650– 9508C), was studied. In both series increasing the temperature caused an increase in the BET apparent surface area, yielding ACs with SBET up to 870 and 710m2 g 1 after steam and CO2 activation, respectively. Also, a slight widening of the porosity was found in both cases. In order to modify the functionality of the ACs, two of them were impregnated with triethylenediamine (TEDA) prior to the adsorption process, which caused a decrease in the AC apparent surface mainly due to micropore blockage. The fluoxetine adsorption isotherms at 258C showed maximum adsorption capacities between 110 and 224mgg 1. The adsorption isotherms were analyzed using Langmuir and Freundlich models. Although the impregnation reduced the pore volume, it did not cause a decrease in the fluoxetine maximum adsorption capacity, but a modification in the adsorption mechanism was observed.
publishDate 2012
dc.date.none.fl_str_mv 2012-01-01T00:00:00Z
2013-01-03T11:07:19Z
2013-01-03
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10174/7006
http://hdl.handle.net/10174/7006
https://doi.org/10.1002/clen.201100009
url http://hdl.handle.net/10174/7006
https://doi.org/10.1002/clen.201100009
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv S. Román, João M. Valente Nabais, J. F. González, C. M. González-García, Angel L. Ortiz, Study of the contributions of non-specific and specific interactions during fluoxetine adsorption onto activated carbons. Clean – Soil, Air, Water 2012, 40 (7), 698–705
nd
nd
nd
nd
nd
252
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.publisher.none.fl_str_mv Clean – Soil, Air, Water
publisher.none.fl_str_mv Clean – Soil, Air, Water
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799136499843727360