Robotizing the conventional and Hot-Forging Wire Arc Additive Manufacturing processes for producing 3D parts with complex geometries

• Autor(a) principal: Varzielas, Bernardo Cruz
• Data de Publicação: 2022
• Tipo de documento: Dissertação
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10362/152868
• topic: Robotic Additive Manufacturing; Wire Arc Additive Manufacturing; Hot-Forging - Wire Arc Additive Manufacturing; Vibration signal; Domínio/Área Científica::Engenharia e Tecnologia::Engenharia Mecânica

Wire Arc Additive Manufacturing (WAAM) is an Additive Manufacturing (AM) process which has high deposition rates at reduced costs, being suitable to produce large size compo-nents. Hot-Forging WAAM (HF-WAAM) is a WAAM variant which uses an oscillating hammer to forge the material as it is deposited, improving mechanical properties and the microstruc-ture of the produced parts. This study aimed to use and validate the WAAM and HF-WAAM to robotize the pro-duction of compact metallic and complex geometry parts. Thus, a welding torch capable of performing forging was redesign, developed and assembled in a 6 degree-of-freedom (6-DoF) manipulator robot. 316LSi stainless steel parts were produced using WAAM and HF-WAAM processes. During their production, the vibration signal of the robot was acquired and then processed and compared. The AM robotic system demonstrated to be suitable to build these parts, since the tool tip speed and tool tip to substrate distance are controlled, and the tool path optimized. It was also observed that vibration did not negatively affect the built parts quality.