Sample-specific odontometric sex estimation: a method with potential application to burned remains

Detalhes bibliográficos
Autor(a) principal: Gouveia, Márcia
Data de Publicação: 2017
Outros Autores: Oliveira-Santos, Inês, Santos, Ana Luísa, Gonçalves, David
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10316/44472
https://doi.org/10.1016/j.scijus.2017.03.001
Resumo: Metric features are often the only preserved sexually dimorphic features to allow sex estimation in burned human remains, but this is complicated by heat-induced dimensional changes. The potential of odontometry for sex estimation was investigated. A sample of permanent lower second pre-molars from 20 males and 20 females was experimentally burned at 900 °C to assess heat-induced changes in the sexual dimorphism of seven dimensions of the cementum-enamel junction and the root. Four of them, cementum-enamel junction perimeter; mesiodistal, buccolingual and perimeter at the mid-root level, were investigated for the first time. Also, five measurements combining some of the isolated standard measurements were investigated. Additionally, 10 permanent upper central incisors and 10 permanent lower first molars were experimentally burned at 400 °C and 700 ° C to document heat-induced dimensional changes and serve as comparison with the 900 °C sample. Results showed that most of the standard measurements, although presenting significant sex differences, were not reliable enough to allow for correct sex classifications close to 100% both before and after the burning. Nonetheless, the perimeter at the cementum-enamel junction and the combined measurements of the mesiodistal and buccolingual diameters, at the same level, were quite promising in the post-burning analysis with correct sex classifications above 80%. At 900 °C, females were slightly more affected by shrinkage in this measure than males thus artificially increasing sexual dimorphism after burning. Therefore, and although additional research is needed, this feature was not discarded as having potential for skeletal sex estimation.
id RCAP_48cc31ece816673412fe45437ae634b7
oai_identifier_str oai:estudogeral.uc.pt:10316/44472
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Sample-specific odontometric sex estimation: a method with potential application to burned remainsMetric features are often the only preserved sexually dimorphic features to allow sex estimation in burned human remains, but this is complicated by heat-induced dimensional changes. The potential of odontometry for sex estimation was investigated. A sample of permanent lower second pre-molars from 20 males and 20 females was experimentally burned at 900 °C to assess heat-induced changes in the sexual dimorphism of seven dimensions of the cementum-enamel junction and the root. Four of them, cementum-enamel junction perimeter; mesiodistal, buccolingual and perimeter at the mid-root level, were investigated for the first time. Also, five measurements combining some of the isolated standard measurements were investigated. Additionally, 10 permanent upper central incisors and 10 permanent lower first molars were experimentally burned at 400 °C and 700 ° C to document heat-induced dimensional changes and serve as comparison with the 900 °C sample. Results showed that most of the standard measurements, although presenting significant sex differences, were not reliable enough to allow for correct sex classifications close to 100% both before and after the burning. Nonetheless, the perimeter at the cementum-enamel junction and the combined measurements of the mesiodistal and buccolingual diameters, at the same level, were quite promising in the post-burning analysis with correct sex classifications above 80%. At 900 °C, females were slightly more affected by shrinkage in this measure than males thus artificially increasing sexual dimorphism after burning. Therefore, and although additional research is needed, this feature was not discarded as having potential for skeletal sex estimation.2017info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://hdl.handle.net/10316/44472http://hdl.handle.net/10316/44472https://doi.org/10.1016/j.scijus.2017.03.001engGouveia, MárciaOliveira-Santos, InêsSantos, Ana LuísaGonçalves, Davidinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2019-10-08T16:45:37Zoai:estudogeral.uc.pt:10316/44472Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T20:52:38.402475Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Sample-specific odontometric sex estimation: a method with potential application to burned remains
title Sample-specific odontometric sex estimation: a method with potential application to burned remains
spellingShingle Sample-specific odontometric sex estimation: a method with potential application to burned remains
Gouveia, Márcia
title_short Sample-specific odontometric sex estimation: a method with potential application to burned remains
title_full Sample-specific odontometric sex estimation: a method with potential application to burned remains
title_fullStr Sample-specific odontometric sex estimation: a method with potential application to burned remains
title_full_unstemmed Sample-specific odontometric sex estimation: a method with potential application to burned remains
title_sort Sample-specific odontometric sex estimation: a method with potential application to burned remains
author Gouveia, Márcia
author_facet Gouveia, Márcia
Oliveira-Santos, Inês
Santos, Ana Luísa
Gonçalves, David
author_role author
author2 Oliveira-Santos, Inês
Santos, Ana Luísa
Gonçalves, David
author2_role author
author
author
dc.contributor.author.fl_str_mv Gouveia, Márcia
Oliveira-Santos, Inês
Santos, Ana Luísa
Gonçalves, David
description Metric features are often the only preserved sexually dimorphic features to allow sex estimation in burned human remains, but this is complicated by heat-induced dimensional changes. The potential of odontometry for sex estimation was investigated. A sample of permanent lower second pre-molars from 20 males and 20 females was experimentally burned at 900 °C to assess heat-induced changes in the sexual dimorphism of seven dimensions of the cementum-enamel junction and the root. Four of them, cementum-enamel junction perimeter; mesiodistal, buccolingual and perimeter at the mid-root level, were investigated for the first time. Also, five measurements combining some of the isolated standard measurements were investigated. Additionally, 10 permanent upper central incisors and 10 permanent lower first molars were experimentally burned at 400 °C and 700 ° C to document heat-induced dimensional changes and serve as comparison with the 900 °C sample. Results showed that most of the standard measurements, although presenting significant sex differences, were not reliable enough to allow for correct sex classifications close to 100% both before and after the burning. Nonetheless, the perimeter at the cementum-enamel junction and the combined measurements of the mesiodistal and buccolingual diameters, at the same level, were quite promising in the post-burning analysis with correct sex classifications above 80%. At 900 °C, females were slightly more affected by shrinkage in this measure than males thus artificially increasing sexual dimorphism after burning. Therefore, and although additional research is needed, this feature was not discarded as having potential for skeletal sex estimation.
publishDate 2017
dc.date.none.fl_str_mv 2017
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10316/44472
http://hdl.handle.net/10316/44472
https://doi.org/10.1016/j.scijus.2017.03.001
url http://hdl.handle.net/10316/44472
https://doi.org/10.1016/j.scijus.2017.03.001
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799133814729998336