Mechanical Performance of Lime Mortar Coatings for Rehabilitation of Masonry Elements in Old and Historical Buildings

• Autor(a) principal: Branco, Fernando G.
• Data de Publicação: 2021
• Outros Autores: Belgas, Maria de Lurdes, Mendes, Cátia, Pereira, Luís, Ortega, José Marcos
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10316/105489; https://doi.org/10.3390/su13063281
• topic: coatings; plasters; mortars; lime putty; aerial lime; hydraulic lime; crushed rock powder; mechanical performance; masonry; rehabilitation

The use of lime as a binder in masonry lining mortars plays an important role in its conservation and durability. Knowledge of the mechanical characteristics of pre-existing and restoration mortars is essential in order to guarantee the compatibility between them and for avoiding the appearance of pathologies. The paper mainly focuses on the study of the mechanical performance of lime-based mortars to be applied in rehabilitation works in old buildings. Four types of mortars were tested with very similar workability, based on lime putty, aerial lime, and hydraulic lime. Sand and crushed rock powder were used as aggregates. Compressive and flexural strengths of the mortars were determined, as well as their ultrasonic pulse velocity. Furthermore, specific tests were carried out to characterize the performance of the mortar when used as a binder for plasters and coatings, such as the development of cracking, superficial water absorption under low pressure, and pull-off strength. According to the results obtained, mortars with lime putty showed better mechanical properties, while those with aerial lime had better behavior regarding water absorption under pressure. Despite that, it was generally possible to verify the adequacy of the studied mortars to be used in the rehabilitation of masonry elements.