Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Outros Autores: | , , , , |
Tipo de documento: | Livro |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | https://hdl.handle.net/10216/52865 |
Resumo: | The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to near-net shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most serious kind of damage as it can reduce the load carrying capacity of the joint. A proper choice of tool and cutting parameters can reduce delamination substantially. In this work the results obtained with five different tool geometries are compared. Conclusions show that the choice of adequate drill geometry can reduce thrust forces, thus delamination damage. |
id |
RCAP_58009e1d40eff0a6bf0c8786e97c5444 |
---|---|
oai_identifier_str |
oai:repositorio-aberto.up.pt:10216/52865 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and DelaminationCiências Tecnológicas, Outras ciências da engenharia e tecnologiasTechnological sciences, Other engineering and technologiesThe distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to near-net shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most serious kind of damage as it can reduce the load carrying capacity of the joint. A proper choice of tool and cutting parameters can reduce delamination substantially. In this work the results obtained with five different tool geometries are compared. Conclusions show that the choice of adequate drill geometry can reduce thrust forces, thus delamination damage.20102010-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bookapplication/pdfhttps://hdl.handle.net/10216/52865eng10.4028/www.scientific.net/MSF.636-637.206L.M.P. DuraoD.J.S. GoncalvesJ.M.R.S. TavaresV.H.C. AlbuquerqueA.T. MarquesA.P.M. Baptistainfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-11-29T12:29:55Zoai:repositorio-aberto.up.pt:10216/52865Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T23:21:27.243717Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
title |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
spellingShingle |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination L.M.P. Durao Ciências Tecnológicas, Outras ciências da engenharia e tecnologias Technological sciences, Other engineering and technologies |
title_short |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
title_full |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
title_fullStr |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
title_full_unstemmed |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
title_sort |
Drilling of Carbon Fibre Reinforced Laminates - A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination |
author |
L.M.P. Durao |
author_facet |
L.M.P. Durao D.J.S. Goncalves J.M.R.S. Tavares V.H.C. Albuquerque A.T. Marques A.P.M. Baptista |
author_role |
author |
author2 |
D.J.S. Goncalves J.M.R.S. Tavares V.H.C. Albuquerque A.T. Marques A.P.M. Baptista |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
L.M.P. Durao D.J.S. Goncalves J.M.R.S. Tavares V.H.C. Albuquerque A.T. Marques A.P.M. Baptista |
dc.subject.por.fl_str_mv |
Ciências Tecnológicas, Outras ciências da engenharia e tecnologias Technological sciences, Other engineering and technologies |
topic |
Ciências Tecnológicas, Outras ciências da engenharia e tecnologias Technological sciences, Other engineering and technologies |
description |
The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to near-net shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most serious kind of damage as it can reduce the load carrying capacity of the joint. A proper choice of tool and cutting parameters can reduce delamination substantially. In this work the results obtained with five different tool geometries are compared. Conclusions show that the choice of adequate drill geometry can reduce thrust forces, thus delamination damage. |
publishDate |
2010 |
dc.date.none.fl_str_mv |
2010 2010-01-01T00:00:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/book |
format |
book |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://hdl.handle.net/10216/52865 |
url |
https://hdl.handle.net/10216/52865 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.4028/www.scientific.net/MSF.636-637.206 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799135514194870272 |