Method for effective dead time measurement in counting systems

• Autor(a) principal: Vinagre, F. L. R.
• Data de Publicação: 2001
• Outros Autores: Conde, C. A. N.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10316/4514; https://doi.org/10.1016/S0168-9002(01)00179-6
• topic: Pulse pile-up; Dead time behavior; Resolution time; Counting losses; Radiation detectors; Absolute counting measurements.

The counting losses introduced by the dead time of a counting system are a limiting factor in counting measurements. The purpose of this work is to report an efficient method for the measurement of the effective dead time of a counting system and to characterize its dead time behavior, providing a way to investigate each experimental situation. The method, which we designate as Delayed and Mixed Pulses method, is based on the artificial piling-up of detector pulses with electronic pulses delayed by a specific time interval. It is applicable to the measurement of the effective dead time of a counting system, including both pile-up effects and the dead time characteristics of the elements of the counting chain. With counting systems relying on gaseous radiation detectors, we achieved a standard uncertainty of about 5-10% in the dead times measured.