On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , , , , , , , , , , , , , , , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | http://hdl.handle.net/10362/151017 |
Resumo: | Funding Information: Funding was provided by Interreg Atlantic area through the project EAPA_174/2016-3DPARE-Artificial Reef 3D Printing for Atlantic area granted to the Faculty of Sciences of the University of Porto; Bournemouth University; ESITC—École Supérieure d’Ingénieurs des Travaux de la Construction de Caen; University of Cantabria; and IPMA—Instituto Português do Mar e da Atmosfera. Funding Information: The results presented in this article were obtained in the framework of the collaborative project Artificial Reef 3D Printing for Atlantic Area (3DPARE), co-funded by the European Regional Development Fund through the European cross-border program INTERREG Atlantic Area. Publisher Copyright: © 2022 by the authors. |
id |
RCAP_6de0313a60975f50c6df1b1dcba8fda9 |
---|---|
oai_identifier_str |
oai:run.unl.pt:10362/151017 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D PrintingLong-Term Interactions of Cementitious Materials in the Marine Environment3D printingartificial reefscolonizationeco-materialgeopolymer bindermicro/macro-organismsComputer Science (miscellaneous)Geography, Planning and DevelopmentRenewable Energy, Sustainability and the EnvironmentBuilding and ConstructionEnvironmental Science (miscellaneous)Energy Engineering and Power TechnologyHardware and ArchitectureComputer Networks and CommunicationsManagement, Monitoring, Policy and LawSDG 7 - Affordable and Clean EnergySDG 13 - Climate ActionSDG 14 - Life Below WaterFunding Information: Funding was provided by Interreg Atlantic area through the project EAPA_174/2016-3DPARE-Artificial Reef 3D Printing for Atlantic area granted to the Faculty of Sciences of the University of Porto; Bournemouth University; ESITC—École Supérieure d’Ingénieurs des Travaux de la Construction de Caen; University of Cantabria; and IPMA—Instituto Português do Mar e da Atmosfera. Funding Information: The results presented in this article were obtained in the framework of the collaborative project Artificial Reef 3D Printing for Atlantic Area (3DPARE), co-funded by the European Regional Development Fund through the European cross-border program INTERREG Atlantic Area. Publisher Copyright: © 2022 by the authors.This paper deals with the evolution monitoring of biomass colonization and mechanical properties of 3D printed eco-materials/mortars immersed in the sea. Measurements of tensile strength, compressive strength, and Young’s modulus were determined on samples deployed along the Atlantic coast of Europe, in France, United Kingdom, Spain, and Portugal. The samples were manufactured using 3D printing, where six mix designs with a low environmental impact binder were used. These mortars were based on geopolymer and cementitious binders (Cement CEM III), in which sand is replaced by three types of recycled sand, including glass, seashell, and limestone by 30%, 50%, and 100% respectively. The colonization of concrete samples by micro/macro-organisms and their durability were also evaluated after 1, 3, 6, 12, and 24 months of immersion. The results showed that both biomass colonization and mechanical properties were better with CEM III compared to geopolymer-based compositions. Therefore, the mixed design optimized according to mechanical properties show that the use of CEM III should be preferred over these geopolymer binders in 3D printed concrete for artificial reef applications.MARE - Centro de Ciências do Mar e do AmbienteRUNBoukhelf, FouadSebaibi, NassimBoutouil, MohamedYoris-Nobile, Adrian I.Blanco-Fernandez, ElenaCastro-Fresno, DanielReal-Gutierrez, CarlosHerbert, Roger J. H.Greenhill, SamReis, BiancaFranco, João N.Borges, Maria TeresaSousa-Pinto, Isabelvan der Linden, PieterGómez, Oscar BabéMeyer, Hugo SainzAlmada, EmanuelStafford, RickDanet, ValentinLobo-Arteaga, JorgeTuaty-Guerra, MiriamE. Hall, Alice2023-03-21T22:27:42Z2022-07-302022-07-30T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article14application/pdfhttp://hdl.handle.net/10362/151017eng2071-1050PURE: 56487528https://doi.org/10.3390/su14159353info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-03-11T05:33:26Zoai:run.unl.pt:10362/151017Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T03:54:25.138765Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing Long-Term Interactions of Cementitious Materials in the Marine Environment |
title |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing |
spellingShingle |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing Boukhelf, Fouad 3D printing artificial reefs colonization eco-material geopolymer binder micro/macro-organisms Computer Science (miscellaneous) Geography, Planning and Development Renewable Energy, Sustainability and the Environment Building and Construction Environmental Science (miscellaneous) Energy Engineering and Power Technology Hardware and Architecture Computer Networks and Communications Management, Monitoring, Policy and Law SDG 7 - Affordable and Clean Energy SDG 13 - Climate Action SDG 14 - Life Below Water |
title_short |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing |
title_full |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing |
title_fullStr |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing |
title_full_unstemmed |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing |
title_sort |
On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing |
author |
Boukhelf, Fouad |
author_facet |
Boukhelf, Fouad Sebaibi, Nassim Boutouil, Mohamed Yoris-Nobile, Adrian I. Blanco-Fernandez, Elena Castro-Fresno, Daniel Real-Gutierrez, Carlos Herbert, Roger J. H. Greenhill, Sam Reis, Bianca Franco, João N. Borges, Maria Teresa Sousa-Pinto, Isabel van der Linden, Pieter Gómez, Oscar Babé Meyer, Hugo Sainz Almada, Emanuel Stafford, Rick Danet, Valentin Lobo-Arteaga, Jorge Tuaty-Guerra, Miriam E. Hall, Alice |
author_role |
author |
author2 |
Sebaibi, Nassim Boutouil, Mohamed Yoris-Nobile, Adrian I. Blanco-Fernandez, Elena Castro-Fresno, Daniel Real-Gutierrez, Carlos Herbert, Roger J. H. Greenhill, Sam Reis, Bianca Franco, João N. Borges, Maria Teresa Sousa-Pinto, Isabel van der Linden, Pieter Gómez, Oscar Babé Meyer, Hugo Sainz Almada, Emanuel Stafford, Rick Danet, Valentin Lobo-Arteaga, Jorge Tuaty-Guerra, Miriam E. Hall, Alice |
author2_role |
author author author author author author author author author author author author author author author author author author author author author |
dc.contributor.none.fl_str_mv |
MARE - Centro de Ciências do Mar e do Ambiente RUN |
dc.contributor.author.fl_str_mv |
Boukhelf, Fouad Sebaibi, Nassim Boutouil, Mohamed Yoris-Nobile, Adrian I. Blanco-Fernandez, Elena Castro-Fresno, Daniel Real-Gutierrez, Carlos Herbert, Roger J. H. Greenhill, Sam Reis, Bianca Franco, João N. Borges, Maria Teresa Sousa-Pinto, Isabel van der Linden, Pieter Gómez, Oscar Babé Meyer, Hugo Sainz Almada, Emanuel Stafford, Rick Danet, Valentin Lobo-Arteaga, Jorge Tuaty-Guerra, Miriam E. Hall, Alice |
dc.subject.por.fl_str_mv |
3D printing artificial reefs colonization eco-material geopolymer binder micro/macro-organisms Computer Science (miscellaneous) Geography, Planning and Development Renewable Energy, Sustainability and the Environment Building and Construction Environmental Science (miscellaneous) Energy Engineering and Power Technology Hardware and Architecture Computer Networks and Communications Management, Monitoring, Policy and Law SDG 7 - Affordable and Clean Energy SDG 13 - Climate Action SDG 14 - Life Below Water |
topic |
3D printing artificial reefs colonization eco-material geopolymer binder micro/macro-organisms Computer Science (miscellaneous) Geography, Planning and Development Renewable Energy, Sustainability and the Environment Building and Construction Environmental Science (miscellaneous) Energy Engineering and Power Technology Hardware and Architecture Computer Networks and Communications Management, Monitoring, Policy and Law SDG 7 - Affordable and Clean Energy SDG 13 - Climate Action SDG 14 - Life Below Water |
description |
Funding Information: Funding was provided by Interreg Atlantic area through the project EAPA_174/2016-3DPARE-Artificial Reef 3D Printing for Atlantic area granted to the Faculty of Sciences of the University of Porto; Bournemouth University; ESITC—École Supérieure d’Ingénieurs des Travaux de la Construction de Caen; University of Cantabria; and IPMA—Instituto Português do Mar e da Atmosfera. Funding Information: The results presented in this article were obtained in the framework of the collaborative project Artificial Reef 3D Printing for Atlantic Area (3DPARE), co-funded by the European Regional Development Fund through the European cross-border program INTERREG Atlantic Area. Publisher Copyright: © 2022 by the authors. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-07-30 2022-07-30T00:00:00Z 2023-03-21T22:27:42Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10362/151017 |
url |
http://hdl.handle.net/10362/151017 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
2071-1050 PURE: 56487528 https://doi.org/10.3390/su14159353 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
14 application/pdf |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799138133012381696 |