Aluminum anodization in deionized water as electrolyte

• Autor(a) principal: Lisenkov, Aleksey D.
• Data de Publicação: 2016
• Outros Autores: Poznyak, Sergey K., Zheludkevich, Mikhail L., Ferreira, Mário G. S.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10773/18130
• topic: Aluminium oxide; Anodic films; Discharge anodization; High-voltage anodization; SKPFM

Thin oxide films were prepared electrochemically on the aluminum surface using the high-voltage discharge and potentiostatic methods in deionized water as an electrolyte. The growth of continuous films occurred only at potentials lower than the breakdown potential. The films obtained by the discharge method are more uniform and can grow to a higher thickness in comparison to those formed by the potentiostatic mode, as demonstrated by electrochemical impedance spectroscopy (EIS), transmission electron microscopy (TEM), and scanning Kelvin probe force microscopy (SKPFM). The data herein obtained can be used as a reference to understand better the properties of the films produced in conventional electrolytes where apart from water other species are present.