What kind of heat loss requirements NZEB and deep renovation sets for building envelope?

Detalhes bibliográficos
Autor(a) principal: Kalamees, Targo
Data de Publicação: 2016
Outros Autores: Lupisek, Antonín, Morck, Ove Christen, Borodinecs, Anatolijs, Almeida, Manuela Guedes de, Rovers, Ronald, Op 't Veld, Peter, Kuusk, Kalle, Silva, S. M., Silva, Sandra Monteiro
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/1822/43198
Resumo: In most of countries the energy performance of buildings is defined as (primary) energy use of whole buildingâ s (heating, cooling, ventilation, DHW, lighting, HVAC auxiliary, appliances), not as specific requirements for building envelope. For construction companies of production of modular renovation panels it in necessary to know heat loss properties of building envelope (U, W/(m2â K); ï , W/(mâ K); ï £, W/K; q50, m3/(hâ m2)). In this study it is analyzed what kind of heat loss requirements exists for building envelope to meet on annual basis to following targets: nZEB i.e. national nearly zero energy definition; deep energy renovation with 80 % reduction of primary energy; ZEB i.e. net Zero Energy Building = the annual primary energy use = 0 kWh/(m² a). Indoor climate and energy calculations were made based on national energy calculation methodologies in six countries: Denmark, Estonia, Latvia, Czech Republic, Portugal, and Netherlands. Requirements for heat loss of building envelope vary depending on requirements on indoor climate and energy performance in specific country, outdoor climate, availability of renewable energy, and building typology. The thermal transmittance of the modular wall panels for nZEB was â 5% from pre renovation thermal transmittance in Latvia, â 10% in Estonia and up to 50% in Portugal. For roof the decrease of thermal transmittance was smaller mainly due to smaller thermal transmittance before renovation. Results show the difficulties to reach ZEB with multi-story apartment buildings in cold climate. There are not enough places to install renewables for energy production on site.
id RCAP_73d66cb985ff7685f4ab969881b48200
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/43198
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling What kind of heat loss requirements NZEB and deep renovation sets for building envelope?Deep energy renovationEnergy Performance of BuildingsModular renovation panelsNZEBZEBIn most of countries the energy performance of buildings is defined as (primary) energy use of whole buildingâ s (heating, cooling, ventilation, DHW, lighting, HVAC auxiliary, appliances), not as specific requirements for building envelope. For construction companies of production of modular renovation panels it in necessary to know heat loss properties of building envelope (U, W/(m2â K); ï , W/(mâ K); ï £, W/K; q50, m3/(hâ m2)). In this study it is analyzed what kind of heat loss requirements exists for building envelope to meet on annual basis to following targets: nZEB i.e. national nearly zero energy definition; deep energy renovation with 80 % reduction of primary energy; ZEB i.e. net Zero Energy Building = the annual primary energy use = 0 kWh/(m² a). Indoor climate and energy calculations were made based on national energy calculation methodologies in six countries: Denmark, Estonia, Latvia, Czech Republic, Portugal, and Netherlands. Requirements for heat loss of building envelope vary depending on requirements on indoor climate and energy performance in specific country, outdoor climate, availability of renewable energy, and building typology. The thermal transmittance of the modular wall panels for nZEB was â 5% from pre renovation thermal transmittance in Latvia, â 10% in Estonia and up to 50% in Portugal. For roof the decrease of thermal transmittance was smaller mainly due to smaller thermal transmittance before renovation. Results show the difficulties to reach ZEB with multi-story apartment buildings in cold climate. There are not enough places to install renewables for energy production on site.The study has been conducted in the projects H2020 MoreConnect, TK146 the Estonian Centre of Excellence in Zero Energy and Resource Efficient Smart Buildings and Districts, ZEBE, IUT1−15 Nearly-zero energy solutions and their implementation on deep renovation of buildings.Grada PublishingUniversidade do MinhoKalamees, TargoLupisek, AntonínMorck, Ove ChristenBorodinecs, AnatolijsAlmeida, Manuela Guedes deRovers, RonaldOp 't Veld, PeterKuusk, KalleSilva, S. M.Silva, Sandra Monteiro2016-062016-06-01T00:00:00Zconference paperinfo:eu-repo/semantics/publishedVersionapplication/pdfhttp://hdl.handle.net/1822/43198engKalamees T., Lupisek A., Morck O., Borodinecs A., Almeida M. G., Rovers R., Op 't Veld Peter, Kuusk K., Silva S. M. What kind of heat loss requirements NZEB and deep renovation sets for building envelope?, CESB 2016 - Central Europe towards Sustainable Building 2016, 20169788027102488info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-05-11T06:58:28Zoai:repositorium.sdum.uminho.pt:1822/43198Portal AgregadorONGhttps://www.rcaap.pt/oai/openairemluisa.alvim@gmail.comopendoar:71602024-05-11T06:58:28Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
title What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
spellingShingle What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
Kalamees, Targo
Deep energy renovation
Energy Performance of Buildings
Modular renovation panels
NZEB
ZEB
title_short What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
title_full What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
title_fullStr What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
title_full_unstemmed What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
title_sort What kind of heat loss requirements NZEB and deep renovation sets for building envelope?
author Kalamees, Targo
author_facet Kalamees, Targo
Lupisek, Antonín
Morck, Ove Christen
Borodinecs, Anatolijs
Almeida, Manuela Guedes de
Rovers, Ronald
Op 't Veld, Peter
Kuusk, Kalle
Silva, S. M.
Silva, Sandra Monteiro
author_role author
author2 Lupisek, Antonín
Morck, Ove Christen
Borodinecs, Anatolijs
Almeida, Manuela Guedes de
Rovers, Ronald
Op 't Veld, Peter
Kuusk, Kalle
Silva, S. M.
Silva, Sandra Monteiro
author2_role author
author
author
author
author
author
author
author
author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Kalamees, Targo
Lupisek, Antonín
Morck, Ove Christen
Borodinecs, Anatolijs
Almeida, Manuela Guedes de
Rovers, Ronald
Op 't Veld, Peter
Kuusk, Kalle
Silva, S. M.
Silva, Sandra Monteiro
dc.subject.por.fl_str_mv Deep energy renovation
Energy Performance of Buildings
Modular renovation panels
NZEB
ZEB
topic Deep energy renovation
Energy Performance of Buildings
Modular renovation panels
NZEB
ZEB
description In most of countries the energy performance of buildings is defined as (primary) energy use of whole buildingâ s (heating, cooling, ventilation, DHW, lighting, HVAC auxiliary, appliances), not as specific requirements for building envelope. For construction companies of production of modular renovation panels it in necessary to know heat loss properties of building envelope (U, W/(m2â K); ï , W/(mâ K); ï £, W/K; q50, m3/(hâ m2)). In this study it is analyzed what kind of heat loss requirements exists for building envelope to meet on annual basis to following targets: nZEB i.e. national nearly zero energy definition; deep energy renovation with 80 % reduction of primary energy; ZEB i.e. net Zero Energy Building = the annual primary energy use = 0 kWh/(m² a). Indoor climate and energy calculations were made based on national energy calculation methodologies in six countries: Denmark, Estonia, Latvia, Czech Republic, Portugal, and Netherlands. Requirements for heat loss of building envelope vary depending on requirements on indoor climate and energy performance in specific country, outdoor climate, availability of renewable energy, and building typology. The thermal transmittance of the modular wall panels for nZEB was â 5% from pre renovation thermal transmittance in Latvia, â 10% in Estonia and up to 50% in Portugal. For roof the decrease of thermal transmittance was smaller mainly due to smaller thermal transmittance before renovation. Results show the difficulties to reach ZEB with multi-story apartment buildings in cold climate. There are not enough places to install renewables for energy production on site.
publishDate 2016
dc.date.none.fl_str_mv 2016-06
2016-06-01T00:00:00Z
dc.type.driver.fl_str_mv conference paper
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/1822/43198
url http://hdl.handle.net/1822/43198
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Kalamees T., Lupisek A., Morck O., Borodinecs A., Almeida M. G., Rovers R., Op 't Veld Peter, Kuusk K., Silva S. M. What kind of heat loss requirements NZEB and deep renovation sets for building envelope?, CESB 2016 - Central Europe towards Sustainable Building 2016, 2016
9788027102488
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Grada Publishing
publisher.none.fl_str_mv Grada Publishing
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv mluisa.alvim@gmail.com
_version_ 1817545156722688000