Hybrid models of hydraulic systems for hardware-in-the-loop simulation. Part 2: Experiments

• Autor(a) principal: J. A. Ferreira
• Data de Publicação: 2004
• Outros Autores: F. Gomes Almeida, M. R. Quintas, J. P. Estima de Oliveira
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: https://hdl.handle.net/10216/7129
• topic: Outras ciências da engenharia e tecnologias; Other engineering and technologies

The use of new control schemes for hydraulic systems has been the object of study during the last few years. A simulated environment is the cheapest and fastest way of evaluating the relative merits of different control schemes for a given application. Real-time simulation allows parametrization and test of the performance of real controllers. This paper describes the set-up of a real-time simulation platform to perform hardware-in-the-loop simulation experiments with the hydraulic models proposed in the companion paper (Part 1). A set of parametrization techniques are proposed for the semiempirical models of a valve-controlled hydraulic cylinder. Manufacturers data sheets and/or experimental measurements were used to adjust the model parameters. Some of these were directly calculated and others were estimated through the use of optimization techniques. Closed-loop control experiments were then performed on the real-time simulation platform and on the real system, in order to evaluate the real-time performance of the developed models.