Air quality assessment in Patio Bonito, Colombia

• Autor(a) principal: Sánchez, Diego Alexander Parra
• Data de Publicação: 2017
• Tipo de documento: Dissertação
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10773/23424
• topic: Estudos ambientais; Qualidade do ar; Poluição do ar - Patio Bonito (Colômbia); Tijolos - Processos de fabrico

The manufacturing brick generates a direct effect in the air quality affecting the health of the surrounding communities of this type of industry. In the Colombian municipality of Nemocón, in the Patio Bonito rural locality, the majority of small and micro-sized brick fields uses craft techniques for manufacturing different types of bricks. The manufacturing plant is basically represented by a kiln and a plot of land as a farmyard; the area where these elements are concentrated is commonly named “Chircal”. Craft brickers usually use kilns of direct fire and upward firing for cooking. The main fuel used in the manufacture of bricks is coal, followed by natural gas and diesel. The present work aims to characterize air quality, taking into account the massive growth of the brick manufacturing activity in the rural locality of Patio Bonito, Nemocón, Colombia, specifically assessing the particulate matter PM10, which is one of the most critical air pollutant due to its impact on health of its inhabitants and on the local environment. The year 2013 was selected for the analysis, because the highest PM10 concentrations of the last five years that happened in that year, according to historical data from the environmental authority of Cundinamarca region. For assessing the air quality in Patio Bonito, a Gaussian air quality model named URBAIR, developed by the University of Aveiro, was applied. For an adequate operation of this model, it was necessary to collect input data as emission sources and meteorological data. The modeling periods were August 8th, November 20th and 24th 2013, when daily averaged with concentrations above 100 μg/m3, limit regulated by Colombian legislation were registered. Moreover, two improvement scenarios were proposed. The first implied replacing all the “Fuego dormido” kilns by one Tunnel kiln, because it showed the lowest PM10 emissions. The second considered the operation of “Colmena” kilns with an emission control system. Results allowed to conclude that those improvement measures can reduce the PM10 contribution to air pollution levels.