Indústria 4.0: Colaboradores robóticos em cenários de logística

Detalhes bibliográficos
Autor(a) principal: Lucas Santos Damas
Data de Publicação: 2019
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: https://hdl.handle.net/10216/119108
Resumo: In the last few decades, due to research and investment in robotics, robots have ceased to be fiction and have become reality. There are several types of robots that have been developed to run from the simplest to the most complex. The dissertation project simulates robots in a factory environment. There are two robots that are totally autonomous and will do the tasks requested by the control panel. There are 2 places of unloading where the final product will be delivered, 2 loading sites where the robots load the raw materials (in this project plastic bottles) and 3 manufacturing substations, where the 3 fill the bottles with different flavors, but different costs and random fluctuations within an acceptable range for the manufacture of water bottles. The robots have to transport the feedstock from the loading zone to the manufacturing substation zone and then from the factories to the discharges depending on the number of orders placed on the system control panel. The trajectories for each target location are pre-defined and optimized. Robots can't have collisions at all. These have a handle so they don't collide with the factory obstacles. Because the robot doesn't identify other robots, each robot receives the position and angle of the other robot and has to bypass. This project also has associated production and transport costs, as well as the simulation of possible faults. In this way, I can describe a manufacturing environment with cost optimization, bringing the project closer to reality. It is also implemented statistics of what will be done in the factory.
id RCAP_9b99bf8c0f547bd0ae94611d4f12583a
oai_identifier_str oai:repositorio-aberto.up.pt:10216/119108
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Indústria 4.0: Colaboradores robóticos em cenários de logísticaEngenharia electrotécnica, electrónica e informáticaElectrical engineering, Electronic engineering, Information engineeringIn the last few decades, due to research and investment in robotics, robots have ceased to be fiction and have become reality. There are several types of robots that have been developed to run from the simplest to the most complex. The dissertation project simulates robots in a factory environment. There are two robots that are totally autonomous and will do the tasks requested by the control panel. There are 2 places of unloading where the final product will be delivered, 2 loading sites where the robots load the raw materials (in this project plastic bottles) and 3 manufacturing substations, where the 3 fill the bottles with different flavors, but different costs and random fluctuations within an acceptable range for the manufacture of water bottles. The robots have to transport the feedstock from the loading zone to the manufacturing substation zone and then from the factories to the discharges depending on the number of orders placed on the system control panel. The trajectories for each target location are pre-defined and optimized. Robots can't have collisions at all. These have a handle so they don't collide with the factory obstacles. Because the robot doesn't identify other robots, each robot receives the position and angle of the other robot and has to bypass. This project also has associated production and transport costs, as well as the simulation of possible faults. In this way, I can describe a manufacturing environment with cost optimization, bringing the project closer to reality. It is also implemented statistics of what will be done in the factory.2019-02-072019-02-07T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttps://hdl.handle.net/10216/119108TID:202394557porLucas Santos Damasinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-11-29T13:59:43Zoai:repositorio-aberto.up.pt:10216/119108Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T23:51:52.959062Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Indústria 4.0: Colaboradores robóticos em cenários de logística
title Indústria 4.0: Colaboradores robóticos em cenários de logística
spellingShingle Indústria 4.0: Colaboradores robóticos em cenários de logística
Lucas Santos Damas
Engenharia electrotécnica, electrónica e informática
Electrical engineering, Electronic engineering, Information engineering
title_short Indústria 4.0: Colaboradores robóticos em cenários de logística
title_full Indústria 4.0: Colaboradores robóticos em cenários de logística
title_fullStr Indústria 4.0: Colaboradores robóticos em cenários de logística
title_full_unstemmed Indústria 4.0: Colaboradores robóticos em cenários de logística
title_sort Indústria 4.0: Colaboradores robóticos em cenários de logística
author Lucas Santos Damas
author_facet Lucas Santos Damas
author_role author
dc.contributor.author.fl_str_mv Lucas Santos Damas
dc.subject.por.fl_str_mv Engenharia electrotécnica, electrónica e informática
Electrical engineering, Electronic engineering, Information engineering
topic Engenharia electrotécnica, electrónica e informática
Electrical engineering, Electronic engineering, Information engineering
description In the last few decades, due to research and investment in robotics, robots have ceased to be fiction and have become reality. There are several types of robots that have been developed to run from the simplest to the most complex. The dissertation project simulates robots in a factory environment. There are two robots that are totally autonomous and will do the tasks requested by the control panel. There are 2 places of unloading where the final product will be delivered, 2 loading sites where the robots load the raw materials (in this project plastic bottles) and 3 manufacturing substations, where the 3 fill the bottles with different flavors, but different costs and random fluctuations within an acceptable range for the manufacture of water bottles. The robots have to transport the feedstock from the loading zone to the manufacturing substation zone and then from the factories to the discharges depending on the number of orders placed on the system control panel. The trajectories for each target location are pre-defined and optimized. Robots can't have collisions at all. These have a handle so they don't collide with the factory obstacles. Because the robot doesn't identify other robots, each robot receives the position and angle of the other robot and has to bypass. This project also has associated production and transport costs, as well as the simulation of possible faults. In this way, I can describe a manufacturing environment with cost optimization, bringing the project closer to reality. It is also implemented statistics of what will be done in the factory.
publishDate 2019
dc.date.none.fl_str_mv 2019-02-07
2019-02-07T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://hdl.handle.net/10216/119108
TID:202394557
url https://hdl.handle.net/10216/119108
identifier_str_mv TID:202394557
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799135838771085312