Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images
Autor(a) principal: | |
---|---|
Data de Publicação: | 2019 |
Outros Autores: | , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | http://hdl.handle.net/11110/1713 |
Resumo: | Left atrial appendage (LAA) occlusion is used to reduce the risk of thromboembolism in patients with nonvalvular atrial fibrillation, by obstructing the LAA through a percutaneously delivered device. Nonetheless, correct device sizing is complex, requiring the manual estimation of different measurements in pre-/peri-procedural images, which is tedious, time-consuming and with high inter- and intra-observer variability. In this work, a semi-automatic solution to estimate the required relevant clinical measurements is described. This solution starts with the 3D segmentation of the LAA in 3D transesophageal echocardiographic (TEE) images, using a constant blind-ended model initialized through a manually defined spline. Then, the segmented LAA surface is aligned with a set of templates, i.e. 3D surfaces plus relevant measurement planes (manually defined by one observer), transferring the latter to the unknown situation. Specifically, the alignment is performed in three consecutive steps, namely: 1) rigid alignment using the LAA clipping plane position, 2) orientation compensation using the circumflex artery location and 3) anatomical refinement through a weighted iterative closest point algorithm. The novel solution was evaluated in a clinical database with 20 volumetric TEE images. Two experiments were set up to assess: 1) the sensitivity of the models parameters and 2) the accuracy of the proposed solution for the estimation of the clinical measurements. Measurement levels manually identified by two observers were used as ground truth. The proposed solution obtained results comparable to the inter-observer variability, presenting narrower limits of agreement for all measurements. Moreover, this solution proved to be fast, taking nearly 40 seconds (manual analysis took 3 minutes) to estimate the relevant measurements while being robust to the variation of the model’s parameters. Overall, the proposed solution showed its potential for fast and robust estimation of the clinical measurements for occluding device selection, proving its added value for clinical practice. |
id |
RCAP_9de1a5f828afc8633d366ee2e9eb289c |
---|---|
oai_identifier_str |
oai:ciencipca.ipca.pt:11110/1713 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE imagesLeft atrial appendage occlusionsemi-automatic occluding device sizing3D image segmentationiterative closest point3D transesophageal echocardiographyLeft atrial appendage (LAA) occlusion is used to reduce the risk of thromboembolism in patients with nonvalvular atrial fibrillation, by obstructing the LAA through a percutaneously delivered device. Nonetheless, correct device sizing is complex, requiring the manual estimation of different measurements in pre-/peri-procedural images, which is tedious, time-consuming and with high inter- and intra-observer variability. In this work, a semi-automatic solution to estimate the required relevant clinical measurements is described. This solution starts with the 3D segmentation of the LAA in 3D transesophageal echocardiographic (TEE) images, using a constant blind-ended model initialized through a manually defined spline. Then, the segmented LAA surface is aligned with a set of templates, i.e. 3D surfaces plus relevant measurement planes (manually defined by one observer), transferring the latter to the unknown situation. Specifically, the alignment is performed in three consecutive steps, namely: 1) rigid alignment using the LAA clipping plane position, 2) orientation compensation using the circumflex artery location and 3) anatomical refinement through a weighted iterative closest point algorithm. The novel solution was evaluated in a clinical database with 20 volumetric TEE images. Two experiments were set up to assess: 1) the sensitivity of the models parameters and 2) the accuracy of the proposed solution for the estimation of the clinical measurements. Measurement levels manually identified by two observers were used as ground truth. The proposed solution obtained results comparable to the inter-observer variability, presenting narrower limits of agreement for all measurements. Moreover, this solution proved to be fast, taking nearly 40 seconds (manual analysis took 3 minutes) to estimate the relevant measurements while being robust to the variation of the model’s parameters. Overall, the proposed solution showed its potential for fast and robust estimation of the clinical measurements for occluding device selection, proving its added value for clinical practice.This work was funded by projects NORTE-01-0145-FEDER-000013, NORTE-01-0145-FEDER-000022 and NORTE-01-0145-FEDER-024300, supported by Northern Portugal Regional Operational Programme (Norte2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (FEDER), and has also been funded by FEDER, through Competitiveness Factors Operational Programme (COMPETE), and by national funds, through the FCT - Fundação para a Ciencia e Tecnologia, under the scope of the project POCI-01-0145-FEDER-007038. The authors acknowledge support by FCT and the European Social Found, through Programa Operacional Capital Humano (POCH), in the scope of the PhD grants SFRH/BD/95438/2013 (P. Morais) and SFRH/BD/93443/2013 (S. Queiros).IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control2019-04-05T17:29:56Z2019-03-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://hdl.handle.net/11110/1713oai:ciencipca.ipca.pt:11110/1713eng0885-3010DOI: 10.1109/TUFFC.2019.2903886http://hdl.handle.net/11110/1713metadata only accessinfo:eu-repo/semantics/openAccessMorais, PedroVilaça, João L.Queirós, SandroDe Meester, PieterBudts, WernerR. S. Tavares, João M.D'hooge, Janreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2022-09-05T12:53:05Zoai:ciencipca.ipca.pt:11110/1713Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T15:02:02.263002Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
title |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
spellingShingle |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images Morais, Pedro Left atrial appendage occlusion semi-automatic occluding device sizing 3D image segmentation iterative closest point 3D transesophageal echocardiography |
title_short |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
title_full |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
title_fullStr |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
title_full_unstemmed |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
title_sort |
Semi-Automatic Estimation of Device Size for Left Atrial Appendage Occlusion in 3D TEE images |
author |
Morais, Pedro |
author_facet |
Morais, Pedro Vilaça, João L. Queirós, Sandro De Meester, Pieter Budts, Werner R. S. Tavares, João M. D'hooge, Jan |
author_role |
author |
author2 |
Vilaça, João L. Queirós, Sandro De Meester, Pieter Budts, Werner R. S. Tavares, João M. D'hooge, Jan |
author2_role |
author author author author author author |
dc.contributor.author.fl_str_mv |
Morais, Pedro Vilaça, João L. Queirós, Sandro De Meester, Pieter Budts, Werner R. S. Tavares, João M. D'hooge, Jan |
dc.subject.por.fl_str_mv |
Left atrial appendage occlusion semi-automatic occluding device sizing 3D image segmentation iterative closest point 3D transesophageal echocardiography |
topic |
Left atrial appendage occlusion semi-automatic occluding device sizing 3D image segmentation iterative closest point 3D transesophageal echocardiography |
description |
Left atrial appendage (LAA) occlusion is used to reduce the risk of thromboembolism in patients with nonvalvular atrial fibrillation, by obstructing the LAA through a percutaneously delivered device. Nonetheless, correct device sizing is complex, requiring the manual estimation of different measurements in pre-/peri-procedural images, which is tedious, time-consuming and with high inter- and intra-observer variability. In this work, a semi-automatic solution to estimate the required relevant clinical measurements is described. This solution starts with the 3D segmentation of the LAA in 3D transesophageal echocardiographic (TEE) images, using a constant blind-ended model initialized through a manually defined spline. Then, the segmented LAA surface is aligned with a set of templates, i.e. 3D surfaces plus relevant measurement planes (manually defined by one observer), transferring the latter to the unknown situation. Specifically, the alignment is performed in three consecutive steps, namely: 1) rigid alignment using the LAA clipping plane position, 2) orientation compensation using the circumflex artery location and 3) anatomical refinement through a weighted iterative closest point algorithm. The novel solution was evaluated in a clinical database with 20 volumetric TEE images. Two experiments were set up to assess: 1) the sensitivity of the models parameters and 2) the accuracy of the proposed solution for the estimation of the clinical measurements. Measurement levels manually identified by two observers were used as ground truth. The proposed solution obtained results comparable to the inter-observer variability, presenting narrower limits of agreement for all measurements. Moreover, this solution proved to be fast, taking nearly 40 seconds (manual analysis took 3 minutes) to estimate the relevant measurements while being robust to the variation of the model’s parameters. Overall, the proposed solution showed its potential for fast and robust estimation of the clinical measurements for occluding device selection, proving its added value for clinical practice. |
publishDate |
2019 |
dc.date.none.fl_str_mv |
2019-04-05T17:29:56Z 2019-03-01T00:00:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/11110/1713 oai:ciencipca.ipca.pt:11110/1713 |
url |
http://hdl.handle.net/11110/1713 |
identifier_str_mv |
oai:ciencipca.ipca.pt:11110/1713 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
0885-3010 DOI: 10.1109/TUFFC.2019.2903886 http://hdl.handle.net/11110/1713 |
dc.rights.driver.fl_str_mv |
metadata only access info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
metadata only access |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control |
publisher.none.fl_str_mv |
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799129890659762176 |