Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating
Autor(a) principal: | |
---|---|
Data de Publicação: | 2023 |
Outros Autores: | , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | http://hdl.handle.net/10362/159769 |
Resumo: | Funding Information: This scientific work was supported by the National Natural Science Foundation of China under grant Nos. 12305328 and 12375285 and by the Shenzhen Municipal Committee on Science and Technology Innovation under grant No. JCYJ20220530140605011. Publisher Copyright: © 2023 by the authors. |
id |
RCAP_9ee6ca4ca80b343cbe7443bf7dd01a64 |
---|---|
oai_identifier_str |
oai:run.unl.pt:10362/159769 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating(Ti-Al)N/MoNcathodic arc ion-platingmechanical and tribological propertiesmultilayer nanocompositeSurfaces and InterfacesSurfaces, Coatings and FilmsMaterials ChemistryFunding Information: This scientific work was supported by the National Natural Science Foundation of China under grant Nos. 12305328 and 12375285 and by the Shenzhen Municipal Committee on Science and Technology Innovation under grant No. JCYJ20220530140605011. Publisher Copyright: © 2023 by the authors.Deposition of (Ti-Al)N/MoN multilayered coatings was carried out through a cathodic ion-plating system in an argon and then nitrogen atmosphere. Bilayer thickness (Λ) of all the samples were achieved, from 22 to 104 nm, by organizing substrate holder rotational speed (SRS). To obtain the optimum properties of the (Ti-Al)N/MoN coatings, the Ti and Al ratio was maintained at a level of 1:1. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy were utilized to analyze the crystal structure and morphology of the coatings. Mechanical and tribological properties were examined by nanohardness and atomic force microscopy (AFM). The preferred orientation of the (Ti-Al)N/MoN nanoscale multilayer films was TiAlN (200) and MoN (200), which had face centered cubic (fcc) and hexagonal structures, respectively. The hardness increased with the decrease in Λ (104 nm to 26 nm), and then it increased. The highest hardness of 37 GPa was revealed at Λ = 26 nm, whereas the least wear rate of 8.09 × 10−7 mm3/N.m was attained at Λ = 22 nm. Wear rate, roughness, and coefficient of friction were decreased with decreasing bilayer period. EDS results showed that Al and Ti contents were almost the same in all samples, as per design of the experiment.CeFITec – Centro de Física e Investigação TecnológicaRUNYousaf, Muhammad I.Abudouwufu, TushaguYang, BingTolstoguzov, AlexanderFu, Dejun2023-11-09T22:09:35Z2023-09-212023-09-21T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article15application/pdfhttp://hdl.handle.net/10362/159769eng2079-6412PURE: 75763112https://doi.org/10.3390/coatings13091654info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-03-11T05:42:14Zoai:run.unl.pt:10362/159769Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T03:57:42.120800Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
title |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
spellingShingle |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating Yousaf, Muhammad I. (Ti-Al)N/MoN cathodic arc ion-plating mechanical and tribological properties multilayer nanocomposite Surfaces and Interfaces Surfaces, Coatings and Films Materials Chemistry |
title_short |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
title_full |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
title_fullStr |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
title_full_unstemmed |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
title_sort |
Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating |
author |
Yousaf, Muhammad I. |
author_facet |
Yousaf, Muhammad I. Abudouwufu, Tushagu Yang, Bing Tolstoguzov, Alexander Fu, Dejun |
author_role |
author |
author2 |
Abudouwufu, Tushagu Yang, Bing Tolstoguzov, Alexander Fu, Dejun |
author2_role |
author author author author |
dc.contributor.none.fl_str_mv |
CeFITec – Centro de Física e Investigação Tecnológica RUN |
dc.contributor.author.fl_str_mv |
Yousaf, Muhammad I. Abudouwufu, Tushagu Yang, Bing Tolstoguzov, Alexander Fu, Dejun |
dc.subject.por.fl_str_mv |
(Ti-Al)N/MoN cathodic arc ion-plating mechanical and tribological properties multilayer nanocomposite Surfaces and Interfaces Surfaces, Coatings and Films Materials Chemistry |
topic |
(Ti-Al)N/MoN cathodic arc ion-plating mechanical and tribological properties multilayer nanocomposite Surfaces and Interfaces Surfaces, Coatings and Films Materials Chemistry |
description |
Funding Information: This scientific work was supported by the National Natural Science Foundation of China under grant Nos. 12305328 and 12375285 and by the Shenzhen Municipal Committee on Science and Technology Innovation under grant No. JCYJ20220530140605011. Publisher Copyright: © 2023 by the authors. |
publishDate |
2023 |
dc.date.none.fl_str_mv |
2023-11-09T22:09:35Z 2023-09-21 2023-09-21T00:00:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10362/159769 |
url |
http://hdl.handle.net/10362/159769 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
2079-6412 PURE: 75763112 https://doi.org/10.3390/coatings13091654 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
15 application/pdf |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799138159457468416 |