Characteristics and behaviour of the mudstones from the upper Triassic
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | http://hdl.handle.net/10316/35264 |
Resumo: | In sites were the mudstone were recently excavated, after exposure to persistent rain, the surface of the ground was transformed from a soft rock to a muddy ground impeding or turning very difficult the traffic of the equipment and the prosecution of the normal construction tasks. The Portuguese mudstones (siltstone and claystone) dated from the end of the Triassic, show frequently severe geotechnical problems when affected by engineering works, changing very rapidly from a soft rock to a soil, when uncompressed and in the presence of water. To evaluate their characteristics field and laboratory tests were executed. The mineralogy is constituted essentially by ilite (or muscovite), kaolinite, chlorite and quartz. Calcite and dolomite can also be found. Despite the geotechnical problems they present, they doesn't possess expansive minerals (smectite). In the intact rock, the porosity is about 15 to 20%, but with very fine pores, presenting a unimodal distribution, with dimensions around 0,03 to 0,05 micra. The total area of pores of the mudstones is from 10 to 14m2/g. The apparent unit weight of the intact mudstones is around 22kN/m3. The point load strength is under 1.27MPa, when dry, reducing drastically even below 0.1MPa after a few minutes of submersion, corresponding to water content between 5% and 15%. After de 2nd cycle of the “Slake Durability Test”, 60% of the mudstone is lost, being disintegrated until the 6th cycle. The expansibility is more intense in the first minutes of wetting, stabilizing after 10 to 20 minutes, developing an expansion stress between 0.1MPa in the intact rock, up to 0.35MPa in the soils derived form the laboratory disintegration of this soft rocks. These soils have a PL=24% and a LL=34%. The methylene blue value (VBS) is between 0.5 and 1.2 g/100g. According to the unified soil classification, the disintegrated soil derived from the mudstone is ML-MI (silt of low to intermediate plasticity) or CL (low plasticity clay). Using the AASHTO classification the soils are A1 (silty soil) or A6 (clay soil). Using the LCLC/SETRA classification the soil are A1 (low plasticity silt). The results of the SPT tests and of the dynamic penetrometers (DPSH) showed very low penetration strength at the surface of the muddy material, increasing very rapidly in depth when reaching the less weathered material. In vertical cuts with moderate heights in the periphery of the work area, the behaviour of the in situ and undisturbed mudstone was quite reasonable without significant degradations or instabilizations of the cut face. These abrupt properties transition showed that a reasonable way to prevent the degradation of the mudstone is avoiding both the relieve of the vertical stress and the contact with the water. In conclusion, the field observations and the tests executed allowed to clarify the causes of the deleterious geotechnical behaviour of these mudstones, in particular when they are subjected to human intervention, associated with the presence of water during the execution of engineering works. The Triassic mudstones are an unusual soft rock material, with very fine pores, without expansive clays, suffering rapid degradation, loosing strength and durability, showing an evolution from a soft rock to a muddy soil, when wetted or saturated, more rapidly than it was anticipated by the field observations, creating very serious geotechnical problems of exposed ground surfaces without any confinement. The more problematic situations are related to foundations and slopes, which suffer degradation after intense rainfalls following the exposure or remobilization of those materials. The extremely fast weatherability of these mudstones after wetting, results mainly form the fine equidimensional network of pores, developing high capillarity stress and driving rapidly the water to the interior of the material. The water absorved destroy the cohesion forces between the uncemented silt particles, turning the soft rock in a muddy soil. |
id |
RCAP_a3a5434279449431057207961db68c45 |
---|---|
oai_identifier_str |
oai:estudogeral.uc.pt:10316/35264 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Characteristics and behaviour of the mudstones from the upper TriassicIn sites were the mudstone were recently excavated, after exposure to persistent rain, the surface of the ground was transformed from a soft rock to a muddy ground impeding or turning very difficult the traffic of the equipment and the prosecution of the normal construction tasks. The Portuguese mudstones (siltstone and claystone) dated from the end of the Triassic, show frequently severe geotechnical problems when affected by engineering works, changing very rapidly from a soft rock to a soil, when uncompressed and in the presence of water. To evaluate their characteristics field and laboratory tests were executed. The mineralogy is constituted essentially by ilite (or muscovite), kaolinite, chlorite and quartz. Calcite and dolomite can also be found. Despite the geotechnical problems they present, they doesn't possess expansive minerals (smectite). In the intact rock, the porosity is about 15 to 20%, but with very fine pores, presenting a unimodal distribution, with dimensions around 0,03 to 0,05 micra. The total area of pores of the mudstones is from 10 to 14m2/g. The apparent unit weight of the intact mudstones is around 22kN/m3. The point load strength is under 1.27MPa, when dry, reducing drastically even below 0.1MPa after a few minutes of submersion, corresponding to water content between 5% and 15%. After de 2nd cycle of the “Slake Durability Test”, 60% of the mudstone is lost, being disintegrated until the 6th cycle. The expansibility is more intense in the first minutes of wetting, stabilizing after 10 to 20 minutes, developing an expansion stress between 0.1MPa in the intact rock, up to 0.35MPa in the soils derived form the laboratory disintegration of this soft rocks. These soils have a PL=24% and a LL=34%. The methylene blue value (VBS) is between 0.5 and 1.2 g/100g. According to the unified soil classification, the disintegrated soil derived from the mudstone is ML-MI (silt of low to intermediate plasticity) or CL (low plasticity clay). Using the AASHTO classification the soils are A1 (silty soil) or A6 (clay soil). Using the LCLC/SETRA classification the soil are A1 (low plasticity silt). The results of the SPT tests and of the dynamic penetrometers (DPSH) showed very low penetration strength at the surface of the muddy material, increasing very rapidly in depth when reaching the less weathered material. In vertical cuts with moderate heights in the periphery of the work area, the behaviour of the in situ and undisturbed mudstone was quite reasonable without significant degradations or instabilizations of the cut face. These abrupt properties transition showed that a reasonable way to prevent the degradation of the mudstone is avoiding both the relieve of the vertical stress and the contact with the water. In conclusion, the field observations and the tests executed allowed to clarify the causes of the deleterious geotechnical behaviour of these mudstones, in particular when they are subjected to human intervention, associated with the presence of water during the execution of engineering works. The Triassic mudstones are an unusual soft rock material, with very fine pores, without expansive clays, suffering rapid degradation, loosing strength and durability, showing an evolution from a soft rock to a muddy soil, when wetted or saturated, more rapidly than it was anticipated by the field observations, creating very serious geotechnical problems of exposed ground surfaces without any confinement. The more problematic situations are related to foundations and slopes, which suffer degradation after intense rainfalls following the exposure or remobilization of those materials. The extremely fast weatherability of these mudstones after wetting, results mainly form the fine equidimensional network of pores, developing high capillarity stress and driving rapidly the water to the interior of the material. The water absorved destroy the cohesion forces between the uncemented silt particles, turning the soft rock in a muddy soil.Carpathian-Balkan Geological Association2010info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://hdl.handle.net/10316/35264http://hdl.handle.net/10316/35264engQuinta-Ferreira, M.. 2010. "Characteristics and behaviour of the mudstones from the upper Triassic", Geologica Balcanica 39, 1-2: 329 - 329.http://www.geology.bas.bg/geolbal/CBGA_2010_Ceol_Balc.pdfQuinta-Ferreira, Márioinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2020-05-25T04:49:30Zoai:estudogeral.uc.pt:10316/35264Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T20:55:12.431534Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Characteristics and behaviour of the mudstones from the upper Triassic |
title |
Characteristics and behaviour of the mudstones from the upper Triassic |
spellingShingle |
Characteristics and behaviour of the mudstones from the upper Triassic Quinta-Ferreira, Mário |
title_short |
Characteristics and behaviour of the mudstones from the upper Triassic |
title_full |
Characteristics and behaviour of the mudstones from the upper Triassic |
title_fullStr |
Characteristics and behaviour of the mudstones from the upper Triassic |
title_full_unstemmed |
Characteristics and behaviour of the mudstones from the upper Triassic |
title_sort |
Characteristics and behaviour of the mudstones from the upper Triassic |
author |
Quinta-Ferreira, Mário |
author_facet |
Quinta-Ferreira, Mário |
author_role |
author |
dc.contributor.author.fl_str_mv |
Quinta-Ferreira, Mário |
description |
In sites were the mudstone were recently excavated, after exposure to persistent rain, the surface of the ground was transformed from a soft rock to a muddy ground impeding or turning very difficult the traffic of the equipment and the prosecution of the normal construction tasks. The Portuguese mudstones (siltstone and claystone) dated from the end of the Triassic, show frequently severe geotechnical problems when affected by engineering works, changing very rapidly from a soft rock to a soil, when uncompressed and in the presence of water. To evaluate their characteristics field and laboratory tests were executed. The mineralogy is constituted essentially by ilite (or muscovite), kaolinite, chlorite and quartz. Calcite and dolomite can also be found. Despite the geotechnical problems they present, they doesn't possess expansive minerals (smectite). In the intact rock, the porosity is about 15 to 20%, but with very fine pores, presenting a unimodal distribution, with dimensions around 0,03 to 0,05 micra. The total area of pores of the mudstones is from 10 to 14m2/g. The apparent unit weight of the intact mudstones is around 22kN/m3. The point load strength is under 1.27MPa, when dry, reducing drastically even below 0.1MPa after a few minutes of submersion, corresponding to water content between 5% and 15%. After de 2nd cycle of the “Slake Durability Test”, 60% of the mudstone is lost, being disintegrated until the 6th cycle. The expansibility is more intense in the first minutes of wetting, stabilizing after 10 to 20 minutes, developing an expansion stress between 0.1MPa in the intact rock, up to 0.35MPa in the soils derived form the laboratory disintegration of this soft rocks. These soils have a PL=24% and a LL=34%. The methylene blue value (VBS) is between 0.5 and 1.2 g/100g. According to the unified soil classification, the disintegrated soil derived from the mudstone is ML-MI (silt of low to intermediate plasticity) or CL (low plasticity clay). Using the AASHTO classification the soils are A1 (silty soil) or A6 (clay soil). Using the LCLC/SETRA classification the soil are A1 (low plasticity silt). The results of the SPT tests and of the dynamic penetrometers (DPSH) showed very low penetration strength at the surface of the muddy material, increasing very rapidly in depth when reaching the less weathered material. In vertical cuts with moderate heights in the periphery of the work area, the behaviour of the in situ and undisturbed mudstone was quite reasonable without significant degradations or instabilizations of the cut face. These abrupt properties transition showed that a reasonable way to prevent the degradation of the mudstone is avoiding both the relieve of the vertical stress and the contact with the water. In conclusion, the field observations and the tests executed allowed to clarify the causes of the deleterious geotechnical behaviour of these mudstones, in particular when they are subjected to human intervention, associated with the presence of water during the execution of engineering works. The Triassic mudstones are an unusual soft rock material, with very fine pores, without expansive clays, suffering rapid degradation, loosing strength and durability, showing an evolution from a soft rock to a muddy soil, when wetted or saturated, more rapidly than it was anticipated by the field observations, creating very serious geotechnical problems of exposed ground surfaces without any confinement. The more problematic situations are related to foundations and slopes, which suffer degradation after intense rainfalls following the exposure or remobilization of those materials. The extremely fast weatherability of these mudstones after wetting, results mainly form the fine equidimensional network of pores, developing high capillarity stress and driving rapidly the water to the interior of the material. The water absorved destroy the cohesion forces between the uncemented silt particles, turning the soft rock in a muddy soil. |
publishDate |
2010 |
dc.date.none.fl_str_mv |
2010 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10316/35264 http://hdl.handle.net/10316/35264 |
url |
http://hdl.handle.net/10316/35264 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
Quinta-Ferreira, M.. 2010. "Characteristics and behaviour of the mudstones from the upper Triassic", Geologica Balcanica 39, 1-2: 329 - 329. http://www.geology.bas.bg/geolbal/CBGA_2010_Ceol_Balc.pdf |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Carpathian-Balkan Geological Association |
publisher.none.fl_str_mv |
Carpathian-Balkan Geological Association |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799133838870315008 |