Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density
Autor(a) principal: | |
---|---|
Data de Publicação: | 2009 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | http://hdl.handle.net/10198/2084 |
Resumo: | Purpose: To present a methodological procedure to obtain the geometric and discrete models of a human mandible for numerical simulation of the biomechanical behavior of a partially edentulous mandible as a function of cancellous bone density. Methods: A 3D finite element method was used to assess the model of a partially edentulous mandible, Kennedy Class I, with dental implants placed at the region of teeth 33 and 43. The geometric solid model was built from CT-scan images and prototyping. In the discrete model a parametric analysis was performed to analyze the influence of cancellous bone density (25 %, 50 %, 75 %) on the development of mandibular stress and strain during simulation of masticatory forces in the anterior region. Results: Maximum von Mises stress and equivalent strain values in cancellous bone were found close to the loading area (masticatory forces). The peak stress and strain values occurred in the mandibular anterior region, and for the same masticatory force the equivalent stresses increased with bone density. Conclusion: The results suggest that the stresses and strains developed in the mandibular model were affected by cancellous bone density during the simulation of masticatory activity. Objetivo: Apresentar uma metodologia para modelamento geométrico de uma mandíbula humana e obtenção de um modelo discreto para simular numericamente o comportamento biomecânico de uma mandíbula parcialmente edêntula em função de diferentes densidades do osso trabecular. Metodologia: Utilizou-se o método de elementos finitos 3D para realizar um estudo numérico sobre um modelo de mandíbula humana, desdentada parcial tipo Classe I de Kennedy, com implantes nas regiões dos dentes 33 e 43. O modelo sólido geométrico foi determinado por tomografia computorizada e prototipagem. No modelo discretizado foi realizada uma análise paramétrica para verificar a influência da densidade óssea do osso trabecular (25 %, 50 %, 75 %) no desenvolvimento de tensões e deformações da mandíbula durante a aplicação de forças mastigatórias na região anterior. Resultados: As tensões máximas de von Mises e deformações equivalentes no osso trabecular foram desenvolvidas próximo às regiões de aplicação das forças de mordida. Os picos de valores de tensões/deformações localizaram-se na região anterior da mandíbula, sendo que, para o mesmo valor de esforço de mordida, as tensões equivalentes aumentaram com a densidade óssea. Conclusão: Os resultados sugerem que as tensões e deformações desenvolvidas no modelo mandibular testado foram afetadas pelo grau de densidade do osso trabecular durante simulação de atividade mastigatória. |
id |
RCAP_a51a4f2927bef30deb779d29dbf581da |
---|---|
oai_identifier_str |
oai:bibliotecadigital.ipb.pt:10198/2084 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone densityAnálise por elementos finitos do comportamento mecânico de uma mandíbula humana parcialmente edêntula em função da densidade óssea trabecularFinite element analysisMandibleStress analysisMechanical behaviorBone densityAnálise por elementos finitosMandíbulaAnálise de tensõesComportamento mecânicoDensidade ósseaPurpose: To present a methodological procedure to obtain the geometric and discrete models of a human mandible for numerical simulation of the biomechanical behavior of a partially edentulous mandible as a function of cancellous bone density. Methods: A 3D finite element method was used to assess the model of a partially edentulous mandible, Kennedy Class I, with dental implants placed at the region of teeth 33 and 43. The geometric solid model was built from CT-scan images and prototyping. In the discrete model a parametric analysis was performed to analyze the influence of cancellous bone density (25 %, 50 %, 75 %) on the development of mandibular stress and strain during simulation of masticatory forces in the anterior region. Results: Maximum von Mises stress and equivalent strain values in cancellous bone were found close to the loading area (masticatory forces). The peak stress and strain values occurred in the mandibular anterior region, and for the same masticatory force the equivalent stresses increased with bone density. Conclusion: The results suggest that the stresses and strains developed in the mandibular model were affected by cancellous bone density during the simulation of masticatory activity. Objetivo: Apresentar uma metodologia para modelamento geométrico de uma mandíbula humana e obtenção de um modelo discreto para simular numericamente o comportamento biomecânico de uma mandíbula parcialmente edêntula em função de diferentes densidades do osso trabecular. Metodologia: Utilizou-se o método de elementos finitos 3D para realizar um estudo numérico sobre um modelo de mandíbula humana, desdentada parcial tipo Classe I de Kennedy, com implantes nas regiões dos dentes 33 e 43. O modelo sólido geométrico foi determinado por tomografia computorizada e prototipagem. No modelo discretizado foi realizada uma análise paramétrica para verificar a influência da densidade óssea do osso trabecular (25 %, 50 %, 75 %) no desenvolvimento de tensões e deformações da mandíbula durante a aplicação de forças mastigatórias na região anterior. Resultados: As tensões máximas de von Mises e deformações equivalentes no osso trabecular foram desenvolvidas próximo às regiões de aplicação das forças de mordida. Os picos de valores de tensões/deformações localizaram-se na região anterior da mandíbula, sendo que, para o mesmo valor de esforço de mordida, as tensões equivalentes aumentaram com a densidade óssea. Conclusão: Os resultados sugerem que as tensões e deformações desenvolvidas no modelo mandibular testado foram afetadas pelo grau de densidade do osso trabecular durante simulação de atividade mastigatória.Pontifícia Universidade Católica do Rio Grande do SulBiblioteca Digital do IPBCorreia, AndréPiloto, P.A.G.Campos, J.C. ReisVaz, M.A.P.2010-02-23T10:47:33Z200920092010-01-30T14:37:00Z2009-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/10198/2084engCorreia, A.; Piloto, P.A.G.; Campos, J.C. Reis; Vaz, M.A.P. (2009). Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density. Journal of Dental Science. ISSN 0102-9460. 24:1, p. 22-270102-9460info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-11-21T10:06:15Zoai:bibliotecadigital.ipb.pt:10198/2084Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T22:55:22.364755Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density Análise por elementos finitos do comportamento mecânico de uma mandíbula humana parcialmente edêntula em função da densidade óssea trabecular |
title |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density |
spellingShingle |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density Correia, André Finite element analysis Mandible Stress analysis Mechanical behavior Bone density Análise por elementos finitos Mandíbula Análise de tensões Comportamento mecânico Densidade óssea |
title_short |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density |
title_full |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density |
title_fullStr |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density |
title_full_unstemmed |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density |
title_sort |
Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density |
author |
Correia, André |
author_facet |
Correia, André Piloto, P.A.G. Campos, J.C. Reis Vaz, M.A.P. |
author_role |
author |
author2 |
Piloto, P.A.G. Campos, J.C. Reis Vaz, M.A.P. |
author2_role |
author author author |
dc.contributor.none.fl_str_mv |
Biblioteca Digital do IPB |
dc.contributor.author.fl_str_mv |
Correia, André Piloto, P.A.G. Campos, J.C. Reis Vaz, M.A.P. |
dc.subject.por.fl_str_mv |
Finite element analysis Mandible Stress analysis Mechanical behavior Bone density Análise por elementos finitos Mandíbula Análise de tensões Comportamento mecânico Densidade óssea |
topic |
Finite element analysis Mandible Stress analysis Mechanical behavior Bone density Análise por elementos finitos Mandíbula Análise de tensões Comportamento mecânico Densidade óssea |
description |
Purpose: To present a methodological procedure to obtain the geometric and discrete models of a human mandible for numerical simulation of the biomechanical behavior of a partially edentulous mandible as a function of cancellous bone density. Methods: A 3D finite element method was used to assess the model of a partially edentulous mandible, Kennedy Class I, with dental implants placed at the region of teeth 33 and 43. The geometric solid model was built from CT-scan images and prototyping. In the discrete model a parametric analysis was performed to analyze the influence of cancellous bone density (25 %, 50 %, 75 %) on the development of mandibular stress and strain during simulation of masticatory forces in the anterior region. Results: Maximum von Mises stress and equivalent strain values in cancellous bone were found close to the loading area (masticatory forces). The peak stress and strain values occurred in the mandibular anterior region, and for the same masticatory force the equivalent stresses increased with bone density. Conclusion: The results suggest that the stresses and strains developed in the mandibular model were affected by cancellous bone density during the simulation of masticatory activity. Objetivo: Apresentar uma metodologia para modelamento geométrico de uma mandíbula humana e obtenção de um modelo discreto para simular numericamente o comportamento biomecânico de uma mandíbula parcialmente edêntula em função de diferentes densidades do osso trabecular. Metodologia: Utilizou-se o método de elementos finitos 3D para realizar um estudo numérico sobre um modelo de mandíbula humana, desdentada parcial tipo Classe I de Kennedy, com implantes nas regiões dos dentes 33 e 43. O modelo sólido geométrico foi determinado por tomografia computorizada e prototipagem. No modelo discretizado foi realizada uma análise paramétrica para verificar a influência da densidade óssea do osso trabecular (25 %, 50 %, 75 %) no desenvolvimento de tensões e deformações da mandíbula durante a aplicação de forças mastigatórias na região anterior. Resultados: As tensões máximas de von Mises e deformações equivalentes no osso trabecular foram desenvolvidas próximo às regiões de aplicação das forças de mordida. Os picos de valores de tensões/deformações localizaram-se na região anterior da mandíbula, sendo que, para o mesmo valor de esforço de mordida, as tensões equivalentes aumentaram com a densidade óssea. Conclusão: Os resultados sugerem que as tensões e deformações desenvolvidas no modelo mandibular testado foram afetadas pelo grau de densidade do osso trabecular durante simulação de atividade mastigatória. |
publishDate |
2009 |
dc.date.none.fl_str_mv |
2009 2009 2009-01-01T00:00:00Z 2010-02-23T10:47:33Z 2010-01-30T14:37:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10198/2084 |
url |
http://hdl.handle.net/10198/2084 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
Correia, A.; Piloto, P.A.G.; Campos, J.C. Reis; Vaz, M.A.P. (2009). Finite element analysis of the mechanical behavior of a partially edentulous mandible as a function of cancellous bone density. Journal of Dental Science. ISSN 0102-9460. 24:1, p. 22-27 0102-9460 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul |
publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799135156939784192 |