Exploring augmented and data-driven digital modeling tools in product design and engineering

Detalhes bibliográficos
Autor(a) principal: Ferreira, Gonçalo José Teixeira de Pinho
Data de Publicação: 2019
Tipo de documento: Dissertação
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10773/28573
Resumo: Tools are indispensable for all diligent professional practice. New concepts and possibilities for paradigm shifting are emerging with recent computational technological developments in digital tools. However, new tools from key concepts such as “Big-Data”, “Accessibility” and “Algorithmic Design” are fundamentally changing the input and position of the Product Engineer and Designer. After the context introduction, this dissertation document starts by extracting three pivotal criteria from the Product Design Engineering's State of the Art analysis. In each one of those criteria the new emergent, more relevant and paradigmatic concepts are explored and later on are positioned and compared within the Product Lifecycle Management wheel scheme, where the potential risks and gaps are pointed to be explored in the experience part. There are two types of empirical experiences: the first being of case studies from Architecture and Urban Planning — from the student's professional experience —, that served as a pretext and inspiration for the experiments directly made for Product Design Engineering. First with a set of isolated explorations and analysis, second with a hypothetical experience derived from the latter and, finally, a deliberative section that culminate in a listing of risks and changes concluded from all the previous work. The urgency to reflect on what will change in that role and position, what kind of ethical and/or conceptual reformulations should exist for the profession to maintain its intellectual integrity and, ultimately, to survive, are of the utmost evidence.
id RCAP_a5ca535a46f246b546fdb57718e4e62e
oai_identifier_str oai:ria.ua.pt:10773/28573
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Exploring augmented and data-driven digital modeling tools in product design and engineeringIndustry 4.0Augmented realityGenerative designCognitive designTools are indispensable for all diligent professional practice. New concepts and possibilities for paradigm shifting are emerging with recent computational technological developments in digital tools. However, new tools from key concepts such as “Big-Data”, “Accessibility” and “Algorithmic Design” are fundamentally changing the input and position of the Product Engineer and Designer. After the context introduction, this dissertation document starts by extracting three pivotal criteria from the Product Design Engineering's State of the Art analysis. In each one of those criteria the new emergent, more relevant and paradigmatic concepts are explored and later on are positioned and compared within the Product Lifecycle Management wheel scheme, where the potential risks and gaps are pointed to be explored in the experience part. There are two types of empirical experiences: the first being of case studies from Architecture and Urban Planning — from the student's professional experience —, that served as a pretext and inspiration for the experiments directly made for Product Design Engineering. First with a set of isolated explorations and analysis, second with a hypothetical experience derived from the latter and, finally, a deliberative section that culminate in a listing of risks and changes concluded from all the previous work. The urgency to reflect on what will change in that role and position, what kind of ethical and/or conceptual reformulations should exist for the profession to maintain its intellectual integrity and, ultimately, to survive, are of the utmost evidence.As ferramentas são indispensáveis para toda a prática diligente profissional. Novos conceitos e possibilidades de mudança de paradigma estão a surgir com os recentes progressos tecnológicos a nível computacional nas ferramentas digitais. Contudo, novas ferramentas originadas sobre conceitos-chave como “Big Data”, “Acessibilidade” e “Design Algorítmico” estão a mudar de forma fundamental o contributo e posição do Engenheiro e Designer de Produto. Esta dissertação, após uma primeira introdução contextual, começa por extrair três conceitos-eixo duma análise ao Estado da Arte actual em Engenharia e Design de Produto. Em cada um desses conceitos explora-se os novos conceitos emergentes mais relevantes e paradigmáticos, que então são comparados e posicionados no círculo de Gestão de Ciclo de Vida de Produto, apontando aí potenciais riscos e falhas que possam ser explorados em experiências. As experiências empíricas têm duas índoles: a primeira de projetos e casos de estudo de arquitetura e planeamento urbanístico — experiência em contexto de trabalho do aluno —, que serviu de pretexto e inspiração para as experiências relacionadas com Engenharia e Design de Produto. Primeiro com uma série de análises e experiências isoladas, segundo com uma formulação hipotética com o compêndio dessas experiências e, finalmente, com uma secção de reflexão que culmina numa série de riscos e mudanças induzidas do trabalho anterior. A urgência em refletir sobre o que irá alterar nesse papel e posição, que género de reformulações éticas e/ou conceptuais deverão existir para que a profissão mantenha a sua integridade intelectual e, em última instância, sobreviva, são bastante evidentes.2022-01-06T00:00:00Z2019-01-01T00:00:00Z2019info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://hdl.handle.net/10773/28573engFerreira, Gonçalo José Teixeira de Pinhoinfo:eu-repo/semantics/embargoedAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-02-22T11:55:16Zoai:ria.ua.pt:10773/28573Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T03:01:05.075073Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Exploring augmented and data-driven digital modeling tools in product design and engineering
title Exploring augmented and data-driven digital modeling tools in product design and engineering
spellingShingle Exploring augmented and data-driven digital modeling tools in product design and engineering
Ferreira, Gonçalo José Teixeira de Pinho
Industry 4.0
Augmented reality
Generative design
Cognitive design
title_short Exploring augmented and data-driven digital modeling tools in product design and engineering
title_full Exploring augmented and data-driven digital modeling tools in product design and engineering
title_fullStr Exploring augmented and data-driven digital modeling tools in product design and engineering
title_full_unstemmed Exploring augmented and data-driven digital modeling tools in product design and engineering
title_sort Exploring augmented and data-driven digital modeling tools in product design and engineering
author Ferreira, Gonçalo José Teixeira de Pinho
author_facet Ferreira, Gonçalo José Teixeira de Pinho
author_role author
dc.contributor.author.fl_str_mv Ferreira, Gonçalo José Teixeira de Pinho
dc.subject.por.fl_str_mv Industry 4.0
Augmented reality
Generative design
Cognitive design
topic Industry 4.0
Augmented reality
Generative design
Cognitive design
description Tools are indispensable for all diligent professional practice. New concepts and possibilities for paradigm shifting are emerging with recent computational technological developments in digital tools. However, new tools from key concepts such as “Big-Data”, “Accessibility” and “Algorithmic Design” are fundamentally changing the input and position of the Product Engineer and Designer. After the context introduction, this dissertation document starts by extracting three pivotal criteria from the Product Design Engineering's State of the Art analysis. In each one of those criteria the new emergent, more relevant and paradigmatic concepts are explored and later on are positioned and compared within the Product Lifecycle Management wheel scheme, where the potential risks and gaps are pointed to be explored in the experience part. There are two types of empirical experiences: the first being of case studies from Architecture and Urban Planning — from the student's professional experience —, that served as a pretext and inspiration for the experiments directly made for Product Design Engineering. First with a set of isolated explorations and analysis, second with a hypothetical experience derived from the latter and, finally, a deliberative section that culminate in a listing of risks and changes concluded from all the previous work. The urgency to reflect on what will change in that role and position, what kind of ethical and/or conceptual reformulations should exist for the profession to maintain its intellectual integrity and, ultimately, to survive, are of the utmost evidence.
publishDate 2019
dc.date.none.fl_str_mv 2019-01-01T00:00:00Z
2019
2022-01-06T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10773/28573
url http://hdl.handle.net/10773/28573
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/embargoedAccess
eu_rights_str_mv embargoedAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799137666942369792