Double active thermographic inspection of additive manufacturing composites

Detalhes bibliográficos
Autor(a) principal: Silva, Henrique V.
Data de Publicação: 2023
Outros Autores: Martins, Ana P., Machado, Miguel A., Santos, Telmo G., Carvalho, Marta S.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10362/155688
Resumo: Publisher Copyright: © 2023 The Author(s)
id RCAP_b15923c24383b06bf40708241781eaab
oai_identifier_str oai:run.unl.pt:10362/155688
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Double active thermographic inspection of additive manufacturing compositesnumerical modelling and validationComputational modellingDouble Active Transient Thermography (DATT)Non-destructive testing (NDT)Polymer-matrix composites (PMC)Thermal analysisInstrumentationElectrical and Electronic EngineeringPublisher Copyright: © 2023 The Author(s)This study investigates the Non-Destructive Testing (NDT) inspection of 3D-printed fibre-reinforced polymers, comparing the conventional Active Transient Thermography (ATT) technique with a novel variant known as Double Active Transient Thermography (DATT). Finite element models for the simulation of both inspection techniques are validated by evaluating two statistical measures to correlate the numerical results with the experimental responses. The thermal contrast obtained with DATT was approximately twice the one obtained with ATT, for all tested samples. Numerical models allowed an insight evaluation of the heat dissipation along the thickness of the specimens, specifically around the fibres and the defects. These validated numerical models evidenced a relevant tool to predict the results of thermal contrast and to optimize the inspection parameters.DEMI - Departamento de Engenharia Mecânica e IndustrialUNIDEMI - Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e IndustrialRUNSilva, Henrique V.Martins, Ana P.Machado, Miguel A.Santos, Telmo G.Carvalho, Marta S.2023-07-21T22:21:25Z2023-08-152023-08-15T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article8application/pdfhttp://hdl.handle.net/10362/155688engSilva, H. V., Martins, A. P., Machado, M. A., Santos, T. G., & Carvalho, M. S. (2023). Double active thermographic inspection of additive manufacturing composites: numerical modelling and validation. Measurement: Journal of the International Measurement Confederation, 218, [113212]. https://doi.org/10.1016/j.measurement.2023.1132120263-2241PURE: 66905080https://doi.org/10.1016/j.measurement.2023.113212info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-03-11T05:38:20Zoai:run.unl.pt:10362/155688Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T03:56:11.646786Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Double active thermographic inspection of additive manufacturing composites
numerical modelling and validation
title Double active thermographic inspection of additive manufacturing composites
spellingShingle Double active thermographic inspection of additive manufacturing composites
Silva, Henrique V.
Computational modelling
Double Active Transient Thermography (DATT)
Non-destructive testing (NDT)
Polymer-matrix composites (PMC)
Thermal analysis
Instrumentation
Electrical and Electronic Engineering
title_short Double active thermographic inspection of additive manufacturing composites
title_full Double active thermographic inspection of additive manufacturing composites
title_fullStr Double active thermographic inspection of additive manufacturing composites
title_full_unstemmed Double active thermographic inspection of additive manufacturing composites
title_sort Double active thermographic inspection of additive manufacturing composites
author Silva, Henrique V.
author_facet Silva, Henrique V.
Martins, Ana P.
Machado, Miguel A.
Santos, Telmo G.
Carvalho, Marta S.
author_role author
author2 Martins, Ana P.
Machado, Miguel A.
Santos, Telmo G.
Carvalho, Marta S.
author2_role author
author
author
author
dc.contributor.none.fl_str_mv DEMI - Departamento de Engenharia Mecânica e Industrial
UNIDEMI - Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial
RUN
dc.contributor.author.fl_str_mv Silva, Henrique V.
Martins, Ana P.
Machado, Miguel A.
Santos, Telmo G.
Carvalho, Marta S.
dc.subject.por.fl_str_mv Computational modelling
Double Active Transient Thermography (DATT)
Non-destructive testing (NDT)
Polymer-matrix composites (PMC)
Thermal analysis
Instrumentation
Electrical and Electronic Engineering
topic Computational modelling
Double Active Transient Thermography (DATT)
Non-destructive testing (NDT)
Polymer-matrix composites (PMC)
Thermal analysis
Instrumentation
Electrical and Electronic Engineering
description Publisher Copyright: © 2023 The Author(s)
publishDate 2023
dc.date.none.fl_str_mv 2023-07-21T22:21:25Z
2023-08-15
2023-08-15T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10362/155688
url http://hdl.handle.net/10362/155688
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Silva, H. V., Martins, A. P., Machado, M. A., Santos, T. G., & Carvalho, M. S. (2023). Double active thermographic inspection of additive manufacturing composites: numerical modelling and validation. Measurement: Journal of the International Measurement Confederation, 218, [113212]. https://doi.org/10.1016/j.measurement.2023.113212
0263-2241
PURE: 66905080
https://doi.org/10.1016/j.measurement.2023.113212
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 8
application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799138147990241280

Registros relacionados