Direct Digital Manufacturing of Nanocomposites

Detalhes bibliográficos
Autor(a) principal: Mohan, Saeed D.
Data de Publicação: 2019
Outros Autores: Nazhipkyzy, Meruyert, Carreira, Pedro, Santos, Cyril dos, Davis, Fred J., Mateus, Artur, Mitchell, Geoffrey R.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10400.8/8325
Resumo: Acknowledgements: MN acknowledges the support of a BOLASHAK scholarship from the Ministry of Education, Kazakhstan for her internship at the University of Reading. Part of this research leading to these results was funded by the European Union Seventh Framework Programme (FP7/2007- 2013) under grant agreement n° 263017, Project “NanoCelluComp”. Part of the work of AM, SDM and GRM was supported by P2020-PTDC/CTM-POL/7133/2014 FCT (Portugal). The electron microscopy was performed in the Centre for Advanced Microscopy at the University of Reading and we thank Matthew Spink for his help.
id RCAP_be22ac55f83a8508c7388850fd890d62
oai_identifier_str oai:iconline.ipleiria.pt:10400.8/8325
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Direct Digital Manufacturing of NanocompositesAdditive manufacturingCarbon nanotubesElectrospinningStereo-lithographyAcknowledgements: MN acknowledges the support of a BOLASHAK scholarship from the Ministry of Education, Kazakhstan for her internship at the University of Reading. Part of this research leading to these results was funded by the European Union Seventh Framework Programme (FP7/2007- 2013) under grant agreement n° 263017, Project “NanoCelluComp”. Part of the work of AM, SDM and GRM was supported by P2020-PTDC/CTM-POL/7133/2014 FCT (Portugal). The electron microscopy was performed in the Centre for Advanced Microscopy at the University of Reading and we thank Matthew Spink for his help.Additive manufacturing has surged in popularity as a route to designing and preparing functional parts. Depending on the parts function, certain attributes such as high mechanical performances may be desired. We develop a route for improving the mechanical properties of polymer devices, fabricated through additive manufacturing by combining electrospinning and stereo-lithography into one automated process. This process utilises the impressive mechanical properties of carbon nanotubes by encapsulating and aligning them in electrospun fibres. Composite fibres will be incorporated into polymer resins prepared with stereo-lithography, thereby providing resins that benefit from the composite fibres properties, enhancing their overall mechanical properties.Trans Tech PublicationsIC-OnlineMohan, Saeed D.Nazhipkyzy, MeruyertCarreira, PedroSantos, Cyril dosDavis, Fred J.Mateus, ArturMitchell, Geoffrey R.2023-04-04T15:45:49Z2019-04-092019-04-09T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/10400.8/8325engMohan, S. D., Nazhipkyzy, M., Carreira, P., Santos, C., Davis, F. J., Mateus, A., & Mitchell, G. R. (2019). Direct Digital Manufacturing of Nanocomposites. Applied Mechanics and Materials, 890, 92–97. https://doi.org/10.4028/www.scientific.net/amm.890.921662-7482https://doi.org/10.4028/www.scientific.net/AMM.890.92info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2024-01-17T15:56:55Zoai:iconline.ipleiria.pt:10400.8/8325Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-20T01:51:01.051001Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Direct Digital Manufacturing of Nanocomposites
title Direct Digital Manufacturing of Nanocomposites
spellingShingle Direct Digital Manufacturing of Nanocomposites
Mohan, Saeed D.
Additive manufacturing
Carbon nanotubes
Electrospinning
Stereo-lithography
title_short Direct Digital Manufacturing of Nanocomposites
title_full Direct Digital Manufacturing of Nanocomposites
title_fullStr Direct Digital Manufacturing of Nanocomposites
title_full_unstemmed Direct Digital Manufacturing of Nanocomposites
title_sort Direct Digital Manufacturing of Nanocomposites
author Mohan, Saeed D.
author_facet Mohan, Saeed D.
Nazhipkyzy, Meruyert
Carreira, Pedro
Santos, Cyril dos
Davis, Fred J.
Mateus, Artur
Mitchell, Geoffrey R.
author_role author
author2 Nazhipkyzy, Meruyert
Carreira, Pedro
Santos, Cyril dos
Davis, Fred J.
Mateus, Artur
Mitchell, Geoffrey R.
author2_role author
author
author
author
author
author
dc.contributor.none.fl_str_mv IC-Online
dc.contributor.author.fl_str_mv Mohan, Saeed D.
Nazhipkyzy, Meruyert
Carreira, Pedro
Santos, Cyril dos
Davis, Fred J.
Mateus, Artur
Mitchell, Geoffrey R.
dc.subject.por.fl_str_mv Additive manufacturing
Carbon nanotubes
Electrospinning
Stereo-lithography
topic Additive manufacturing
Carbon nanotubes
Electrospinning
Stereo-lithography
description Acknowledgements: MN acknowledges the support of a BOLASHAK scholarship from the Ministry of Education, Kazakhstan for her internship at the University of Reading. Part of this research leading to these results was funded by the European Union Seventh Framework Programme (FP7/2007- 2013) under grant agreement n° 263017, Project “NanoCelluComp”. Part of the work of AM, SDM and GRM was supported by P2020-PTDC/CTM-POL/7133/2014 FCT (Portugal). The electron microscopy was performed in the Centre for Advanced Microscopy at the University of Reading and we thank Matthew Spink for his help.
publishDate 2019
dc.date.none.fl_str_mv 2019-04-09
2019-04-09T00:00:00Z
2023-04-04T15:45:49Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10400.8/8325
url http://hdl.handle.net/10400.8/8325
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Mohan, S. D., Nazhipkyzy, M., Carreira, P., Santos, C., Davis, F. J., Mateus, A., & Mitchell, G. R. (2019). Direct Digital Manufacturing of Nanocomposites. Applied Mechanics and Materials, 890, 92–97. https://doi.org/10.4028/www.scientific.net/amm.890.92
1662-7482
https://doi.org/10.4028/www.scientific.net/AMM.890.92
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Trans Tech Publications
publisher.none.fl_str_mv Trans Tech Publications
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799137002204954624

Registros relacionados