Interference analysis in time of flight LiDARs

• Autor(a) principal: Martins, Pedro Miguel Simões Bastos
• Data de Publicação: 2019
• Tipo de documento: Dissertação
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10773/29885
• topic: LiDAR; LiDAR interference; Camera; Object detection; Autonomous cars; Point cloud; ROS

Every 23 seconds, someone dies on the road. In 2018, 1.35 million people died because of a road accident, 90% of which were caused by human error: reckless behavior, distractions, fatigue, and bad decisions. Autonomous vehicles are one of the solutions to tackle this problem, by replacing or helping the human driver. For that, vehicles need to understand the world around them with great precision in 3D, which makes LiDAR one of the most promising sensors up for the task. To sense their surroundings, LiDARs emit laser beams, which can, theoretically, be received by a LiDAR on another car, disturbing the accuracy of its ability to map the surroundings. In a scenario where multiple autonomous vehicles equipped with LiDAR coexist, their mutual interference can undermine their capability to accurately understand the world and their capability to tackle one of the problems they came to solve: road accidents. In this Master’s thesis we propose to study the behavior of two LiDARs on several interference scenarios, varying their relative distance, height and positioning. We also attempt to understand the different impacts of direct and scattered interference, by blocking the LiDARs line of sight and verify the behavior of the interference on specific regions of interest and objects. We construct an experimental setup containing two LiDARs and a camera, intrinsically and extrinsically calibrate them and estimate the position of the objects of interest on the point cloud through regions of intereset previously detected on the image. Using this experimental setup we gathered more than 600 GB of raw data on which we apply 4 different techniques of interference analysis. Our findings show that the relative number of interference points lies between 10−7 to 10−3 . The results also show that direct interference predominates over scattered, generating relative values of interfered points one order of magnitude higher than when obstructing the line of sight between the LiDARs. We were able to identify cases on which interference seems to behave closely to sensor noise, being almost indistinguishable; in contrast when it was strongly deleterious, resulting on depth measurement errors that surpass the physical dimensions of the room where the setup is operating. We can conclude that interference seems no to be severe for autonomous driving as few measurements are severely impaired by it. Nevertheless, it can still have ill effects, especialy in situations of direct interference. We also conclude that its nature is highly volatile, depending on conditions not yet fully understand, including the influence of the experimental setup.