Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis

Detalhes bibliográficos
Autor(a) principal: Marques, Rui Filipe Pedreira
Data de Publicação: 2014
Outros Autores: Lourenço, Paulo B.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/1822/33808
Resumo: Modern design of buildings requires accounting for sustainability aspects using a life-cycle perspective, but also the early design phase where earthquake actions have a significant influence concerning the structural design. Recently, the seismic evaluation of masonry buildings using macro-element modeling approaches became popular, by applying performance-based assessment procedures through nonlinear static (pushover) analysis methodologies. This work addresses the validation for these approaches referring to two full-scale masonry structures tested under quasi-static lateral loading and almost unknown in the literature. The experimental behavior of tested unreinforced masonry (URM) and confined masonry (CM) structures is compared against the pushover response of the corresponding computational models. Then, referring to typical housing in southern Europe and its usual design with a reinforced concrete (RC) structure, the validated assessment tools are employed to evaluate the earthquake-resistant possibilities of URM and CM solutions, namely in terms of maximum applicable ground accelerations. The masonry solutions are also compared in terms of construction costs against the RC typology. The considered analysis tools present a good agreement when predicting, satisfactorily, the experimental test behavior, thus being able to be used in performance-based design. With respect to the studied housing, the predicted pushover responses for the masonry structures denote capacity to resist earthquakes adequately. These structures allow also a significant cost reduction (up to 25%) against the RC, thus appearing to be competing alternatives.
id RCAP_d774cf7dbf44ec7177d2edcfaea26a2e
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/33808
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysismacro-element modelsquasi-static testsunreinforced masonryconfined masonryseismic assessmentcost analysisEngenharia e Tecnologia::Engenharia CivilScience & TechnologyModern design of buildings requires accounting for sustainability aspects using a life-cycle perspective, but also the early design phase where earthquake actions have a significant influence concerning the structural design. Recently, the seismic evaluation of masonry buildings using macro-element modeling approaches became popular, by applying performance-based assessment procedures through nonlinear static (pushover) analysis methodologies. This work addresses the validation for these approaches referring to two full-scale masonry structures tested under quasi-static lateral loading and almost unknown in the literature. The experimental behavior of tested unreinforced masonry (URM) and confined masonry (CM) structures is compared against the pushover response of the corresponding computational models. Then, referring to typical housing in southern Europe and its usual design with a reinforced concrete (RC) structure, the validated assessment tools are employed to evaluate the earthquake-resistant possibilities of URM and CM solutions, namely in terms of maximum applicable ground accelerations. The masonry solutions are also compared in terms of construction costs against the RC typology. The considered analysis tools present a good agreement when predicting, satisfactorily, the experimental test behavior, thus being able to be used in performance-based design. With respect to the studied housing, the predicted pushover responses for the masonry structures denote capacity to resist earthquakes adequately. These structures allow also a significant cost reduction (up to 25%) against the RC, thus appearing to be competing alternatives.The first author acknowledges the financial support from the Portuguese Foundation for Science and Technology (FCT) through the Ph.D. Grant SFRH/BD/41221/2007. This paper is in honor of Engineer Angel San Bartolome Ramos, Professor and Researcher of the Pontifical Catholic University of Peru, for his contribution in the field of masonry structures.ElsevierUniversidade do MinhoMarques, Rui Filipe PedreiraLourenço, Paulo B.20142014-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/1822/33808engMarques, R., & Lourenco, P. B. (2014). Unreinforced and confined masonry buildings in seismic regions: Validation of macro-element models and cost analysis. Engineering Structures, 64, 52-67. doi: 10.1016/j.engstruct.2014.01.0140141-029610.1016/j.engstruct.2014.01.014http://www.sciencedirect.com/science/article/pii/S0141029614000170info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-07-21T12:51:48Zoai:repositorium.sdum.uminho.pt:1822/33808Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T19:50:47.368269Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
title Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
spellingShingle Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
Marques, Rui Filipe Pedreira
macro-element models
quasi-static tests
unreinforced masonry
confined masonry
seismic assessment
cost analysis
Engenharia e Tecnologia::Engenharia Civil
Science & Technology
title_short Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
title_full Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
title_fullStr Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
title_full_unstemmed Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
title_sort Unreinforced and confined masonry buildings in seismic regions : validation of macro-element models and cost analysis
author Marques, Rui Filipe Pedreira
author_facet Marques, Rui Filipe Pedreira
Lourenço, Paulo B.
author_role author
author2 Lourenço, Paulo B.
author2_role author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Marques, Rui Filipe Pedreira
Lourenço, Paulo B.
dc.subject.por.fl_str_mv macro-element models
quasi-static tests
unreinforced masonry
confined masonry
seismic assessment
cost analysis
Engenharia e Tecnologia::Engenharia Civil
Science & Technology
topic macro-element models
quasi-static tests
unreinforced masonry
confined masonry
seismic assessment
cost analysis
Engenharia e Tecnologia::Engenharia Civil
Science & Technology
description Modern design of buildings requires accounting for sustainability aspects using a life-cycle perspective, but also the early design phase where earthquake actions have a significant influence concerning the structural design. Recently, the seismic evaluation of masonry buildings using macro-element modeling approaches became popular, by applying performance-based assessment procedures through nonlinear static (pushover) analysis methodologies. This work addresses the validation for these approaches referring to two full-scale masonry structures tested under quasi-static lateral loading and almost unknown in the literature. The experimental behavior of tested unreinforced masonry (URM) and confined masonry (CM) structures is compared against the pushover response of the corresponding computational models. Then, referring to typical housing in southern Europe and its usual design with a reinforced concrete (RC) structure, the validated assessment tools are employed to evaluate the earthquake-resistant possibilities of URM and CM solutions, namely in terms of maximum applicable ground accelerations. The masonry solutions are also compared in terms of construction costs against the RC typology. The considered analysis tools present a good agreement when predicting, satisfactorily, the experimental test behavior, thus being able to be used in performance-based design. With respect to the studied housing, the predicted pushover responses for the masonry structures denote capacity to resist earthquakes adequately. These structures allow also a significant cost reduction (up to 25%) against the RC, thus appearing to be competing alternatives.
publishDate 2014
dc.date.none.fl_str_mv 2014
2014-01-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/1822/33808
url http://hdl.handle.net/1822/33808
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Marques, R., & Lourenco, P. B. (2014). Unreinforced and confined masonry buildings in seismic regions: Validation of macro-element models and cost analysis. Engineering Structures, 64, 52-67. doi: 10.1016/j.engstruct.2014.01.014
0141-0296
10.1016/j.engstruct.2014.01.014
http://www.sciencedirect.com/science/article/pii/S0141029614000170
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Elsevier
publisher.none.fl_str_mv Elsevier
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799133094121308160