Flow-induced motions of flexible filaments hanging in cross-flow

• Autor(a) principal: Silva-Leon, Jorge
• Data de Publicação: 2018
• Outros Autores: Cioncolini, Andrea, Filippone, Antonio, Domingos, Marco
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.8/8548
• topic: Limit-cycle oscillation; Turbulence buffeting; Turbulence-induced vibration; Filament; Flexible fluid–structure interaction

Experiments were carried out to study the dynamics of hanging cantilever flexible filaments in air cross-flow. Thirteen flexible filaments of 0.61 mm diameter and lengths from 20 mm to 60 mm were tested with wind speeds in the range of 1–15 m/s, corresponding to Reynolds numbers of 25 < Red < 610 and reduced velocities in the range of 5 < U∗ < 130. Two synchronized fast-imaging cameras were used to reconstruct the motion of the filaments in three dimensions, and a blend of linear and nonlinear time-series analysis techniques was used to analyze the observed dynamics. Long filaments show a rich dynamics as the wind speed is gradually increased, ranging from small amplitude vibration to large amplitude limit-cycle oscillation and to a more complex chaotic motion. However, short filaments only exhibit a small amplitude vibration-like motion throughout the range of wind speeds tested. Turbulent buffeting is identified as the main source of excitation responsible for the observed filaments dynamics. The results highlight the importance of the filament damping ratio, which is modulated by the filament length, as a controlling parameter for the dynamics of flexible filaments in cross flow, in addition to the flow velocity. The Scruton number for these tests correspond to 31 < Sc < 86.