Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials

Detalhes bibliográficos
Autor(a) principal: Cunha, Sandra Raquel Leite
Data de Publicação: 2015
Outros Autores: Aguiar, J. L. Barroso de, Tadeu, A.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/1822/40073
Resumo: Nowadays, considering the high variety of construction products, adequate material selection, based on their properties and function, becomes increasingly important. In this research, a ranking procedure developed by Czarnecki and Lukowski is applied in mortars with incorporation of phase change materials (PCM). The ranking procedure transforms experimental results of properties into one numerical value. The products can be classified according to their individual properties or even an optimized combination of different properties. The main purpose of this study was the ranking of mortars with incorporation of different contents of PCM based in different binders. Aerial lime, hydraulic lime, gypsum and cement were the binders studied. For each binder, three different mortars were developed. Reference mortars, mortars with incorporation of 40% of PCM and mortars with incorporation of 40% of PCM and 1% of fibers, were tested. Results show that the incorporation of PCM in mortars changes their global performance.
id RCAP_dfa63ebad8c9cf846e271eefda7c3aea
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/40073
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materialsProcedimiento de clasificación de morteros con incorporación de materiales de cambio de fase basado en el comportamiento mecánico, durabilidad y comportamiento térmicoDurabilityMechanical propertiesMortarThermal AnalysisWorkabilityMorteroTrabajabilidadPropiedades mecânicasDurabilidadAnálisis térmicoScience & TechnologyNowadays, considering the high variety of construction products, adequate material selection, based on their properties and function, becomes increasingly important. In this research, a ranking procedure developed by Czarnecki and Lukowski is applied in mortars with incorporation of phase change materials (PCM). The ranking procedure transforms experimental results of properties into one numerical value. The products can be classified according to their individual properties or even an optimized combination of different properties. The main purpose of this study was the ranking of mortars with incorporation of different contents of PCM based in different binders. Aerial lime, hydraulic lime, gypsum and cement were the binders studied. For each binder, three different mortars were developed. Reference mortars, mortars with incorporation of 40% of PCM and mortars with incorporation of 40% of PCM and 1% of fibers, were tested. Results show that the incorporation of PCM in mortars changes their global performance.Actualmente, existen varios productos de construcción, siendo importante una adecuada selección, con base en sus principales propiedades y funciones. En esta investigación se aplicó un procedimiento de clasificación desarrollado por Czarnecki y Lukowski, en morteros con incorporación de materiales de cambio de fase (PCM). Este procedimiento transforma los resultados experimentales de las propiedades en un único valor numérico. Los productos se clasifican de acuerdo con sus propiedades individuales o en una combinación optimizada de diferentes propiedades. El principal objetivo de este estudio fue la clasificación de morteros basado en los diferentes aglutinantes con incorporación de diferentes cantidades de PCM. Los aglutinantes utilizados fueran la cal aérea, cal hidráulica, yeso y cemento. Para cada aglutinante se han desarrollado tres morteros, siendo morteros de referencia, con incorporación de 40% de PCM y con incorporación de 40% de PCM y 1% de fibras. Fue observado que la incorporación de PCM en morteros cambia su comportamiento global.Consejo Superior de Investigaciones Científicas (CSIC)Universidade do MinhoCunha, Sandra Raquel LeiteAguiar, J. L. Barroso deTadeu, A.2015-102015-10-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttp://hdl.handle.net/1822/40073engCunha S., Aguiar J., Tadeu A. Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials, Materiales de Construcción, Vol. 65, Issue 320, pp. 1-15, doi:10.3989/mc.2015.07314 , 20150465-274610.3989/mc.2015.07314http://materconstrucc.revistas.csic.es/index.php/materconstrucc/article/view/1895/2311info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-07-21T12:31:14Zoai:repositorium.sdum.uminho.pt:1822/40073Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T19:26:28.328191Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
Procedimiento de clasificación de morteros con incorporación de materiales de cambio de fase basado en el comportamiento mecánico, durabilidad y comportamiento térmico
title Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
spellingShingle Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
Cunha, Sandra Raquel Leite
Durability
Mechanical properties
Mortar
Thermal Analysis
Workability
Mortero
Trabajabilidad
Propiedades mecânicas
Durabilidad
Análisis térmico
Science & Technology
title_short Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
title_full Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
title_fullStr Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
title_full_unstemmed Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
title_sort Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials
author Cunha, Sandra Raquel Leite
author_facet Cunha, Sandra Raquel Leite
Aguiar, J. L. Barroso de
Tadeu, A.
author_role author
author2 Aguiar, J. L. Barroso de
Tadeu, A.
author2_role author
author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Cunha, Sandra Raquel Leite
Aguiar, J. L. Barroso de
Tadeu, A.
dc.subject.por.fl_str_mv Durability
Mechanical properties
Mortar
Thermal Analysis
Workability
Mortero
Trabajabilidad
Propiedades mecânicas
Durabilidad
Análisis térmico
Science & Technology
topic Durability
Mechanical properties
Mortar
Thermal Analysis
Workability
Mortero
Trabajabilidad
Propiedades mecânicas
Durabilidad
Análisis térmico
Science & Technology
description Nowadays, considering the high variety of construction products, adequate material selection, based on their properties and function, becomes increasingly important. In this research, a ranking procedure developed by Czarnecki and Lukowski is applied in mortars with incorporation of phase change materials (PCM). The ranking procedure transforms experimental results of properties into one numerical value. The products can be classified according to their individual properties or even an optimized combination of different properties. The main purpose of this study was the ranking of mortars with incorporation of different contents of PCM based in different binders. Aerial lime, hydraulic lime, gypsum and cement were the binders studied. For each binder, three different mortars were developed. Reference mortars, mortars with incorporation of 40% of PCM and mortars with incorporation of 40% of PCM and 1% of fibers, were tested. Results show that the incorporation of PCM in mortars changes their global performance.
publishDate 2015
dc.date.none.fl_str_mv 2015-10
2015-10-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/1822/40073
url http://hdl.handle.net/1822/40073
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Cunha S., Aguiar J., Tadeu A. Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials, Materiales de Construcción, Vol. 65, Issue 320, pp. 1-15, doi:10.3989/mc.2015.07314 , 2015
0465-2746
10.3989/mc.2015.07314
http://materconstrucc.revistas.csic.es/index.php/materconstrucc/article/view/1895/2311
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Consejo Superior de Investigaciones Científicas (CSIC)
publisher.none.fl_str_mv Consejo Superior de Investigaciones Científicas (CSIC)
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799132752357883904

Registros relacionados