Optimization in additive manufacturing
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Tipo de documento: | Dissertação |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | http://hdl.handle.net/10400.22/11527 |
Resumo: | Additive Manufacturing is a mechanical productive process whose utilization is increasing rapidly. This dissertation was focused in the topological optimization of mechanical parts with a view to reduce their weight, keeping or increasing their mechanical strength. Two different parts usually obtained by conventional techniques were used as case studies, being applied successive iterations leading to their optimization, regarding the use of Additive Manufacturing to produce them in the future. The optimization allowed for parts weight reduction, which will contribute to the always wanted global weight reduction of the set where they belong, improving the sustainability and reduction of emissions. The Altair Hypermesh software was used exclusively as an instrument for performing optimizations. |
id |
RCAP_f2f3b8019c3d366e3a5427006597c2f4 |
---|---|
oai_identifier_str |
oai:recipp.ipp.pt:10400.22/11527 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Optimization in additive manufacturingOtimização na manufatura aditivaOptimizationRapid prototypingAdditive ManufacturingOtimizaçãoImpressão 3DManufatura AditivaMateriais e Tecnologias de fabricoAdditive Manufacturing is a mechanical productive process whose utilization is increasing rapidly. This dissertation was focused in the topological optimization of mechanical parts with a view to reduce their weight, keeping or increasing their mechanical strength. Two different parts usually obtained by conventional techniques were used as case studies, being applied successive iterations leading to their optimization, regarding the use of Additive Manufacturing to produce them in the future. The optimization allowed for parts weight reduction, which will contribute to the always wanted global weight reduction of the set where they belong, improving the sustainability and reduction of emissions. The Altair Hypermesh software was used exclusively as an instrument for performing optimizations.A Fabricação Aditiva é um processo produtivo mecânico cuja utilização está a aumentar rapidamente. Esta dissertação foi focada na otimização topológica de peças mecânicas com vista a reduzir o seu peso, mantendo ou aumentando a sua resistência mecânica. Duas peças diferentes, geralmente obtidas por técnicas convencionais foram usadas como casos de estudos, sendo aplicadas sucessivas iterações, levando à sua otimização com vista ao uso de Fabricação Aditiva para as produzir no futuro. A otimização permitiu uma redução do peso de peças, que contribuirá para a redução do peso global sempre procurado no conjunto onde elas pertencem, melhorando a sustentabilidade e a redução das emissões. A aplicação informática Hypermesh Altair foi usada exclusivamente como instrumento para realizar otimizações.Silva, Francisco José Gomes daRepositório Científico do Instituto Politécnico do PortoCamelo, Wesley Fernandes2021-02-20T01:30:21Z20182018-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://hdl.handle.net/10400.22/11527TID:201882078enginfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-03-13T12:53:35Zoai:recipp.ipp.pt:10400.22/11527Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T17:31:53.699619Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Optimization in additive manufacturing Otimização na manufatura aditiva |
title |
Optimization in additive manufacturing |
spellingShingle |
Optimization in additive manufacturing Camelo, Wesley Fernandes Optimization Rapid prototyping Additive Manufacturing Otimização Impressão 3D Manufatura Aditiva Materiais e Tecnologias de fabrico |
title_short |
Optimization in additive manufacturing |
title_full |
Optimization in additive manufacturing |
title_fullStr |
Optimization in additive manufacturing |
title_full_unstemmed |
Optimization in additive manufacturing |
title_sort |
Optimization in additive manufacturing |
author |
Camelo, Wesley Fernandes |
author_facet |
Camelo, Wesley Fernandes |
author_role |
author |
dc.contributor.none.fl_str_mv |
Silva, Francisco José Gomes da Repositório Científico do Instituto Politécnico do Porto |
dc.contributor.author.fl_str_mv |
Camelo, Wesley Fernandes |
dc.subject.por.fl_str_mv |
Optimization Rapid prototyping Additive Manufacturing Otimização Impressão 3D Manufatura Aditiva Materiais e Tecnologias de fabrico |
topic |
Optimization Rapid prototyping Additive Manufacturing Otimização Impressão 3D Manufatura Aditiva Materiais e Tecnologias de fabrico |
description |
Additive Manufacturing is a mechanical productive process whose utilization is increasing rapidly. This dissertation was focused in the topological optimization of mechanical parts with a view to reduce their weight, keeping or increasing their mechanical strength. Two different parts usually obtained by conventional techniques were used as case studies, being applied successive iterations leading to their optimization, regarding the use of Additive Manufacturing to produce them in the future. The optimization allowed for parts weight reduction, which will contribute to the always wanted global weight reduction of the set where they belong, improving the sustainability and reduction of emissions. The Altair Hypermesh software was used exclusively as an instrument for performing optimizations. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018 2018-01-01T00:00:00Z 2021-02-20T01:30:21Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10400.22/11527 TID:201882078 |
url |
http://hdl.handle.net/10400.22/11527 |
identifier_str_mv |
TID:201882078 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799131413563310080 |