Manufacture of custom-made cranial implants from DICOM® images using 3D printing, CAD/CAM technology and incremental sheet forming

• Autor(a) principal: Castelan,Jovani
• Data de Publicação: 2014
• Outros Autores: Schaeffer,Lirio, Daleffe,Anderson, Fritzen,Daniel, Salvaro,Vanessa, Silva,Fábio Pinto da
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Revista Brasileira de Engenharia Biomédica (Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1517-31512014000300009
• topic: Implant; Biomodel; Incremental sheet forming; Titanium; 3D printing; Custom-made

INTRODUCTION: This work aims to pre-operatively manufacture custom-made low-cost implants and physical models (‘biomodels’) of fractured skulls. The pre-DOI: operative manufacturing of biomodels and implants allows physicians to study and plan surgery with a greater possibility of achieving the expected result. Customization contributes to both the esthetic and functional outcome of the implant because it considers the anatomy of each patient, while the low cost allows a greater number of people to potentially benefit. METHODS: From CT images of a fractured skull, a CAD model of the skull (biomodel) and a restorative implant were constructed digitally. The biomodel was then physically constructed with 3D Printing, and Incremental Sheet Forming (ISF) was used to manufacture the implant from a sheet of pure grade 2 titanium. Before cutting the implant’s final shape from a pre-formed sheet, heat treatment was performed to avoid deformations caused by residual stresses generated during the ISF process. RESULTS: A comparison of the dimensions of the implant and its respective CAD biomodel revealed geometric discrepancies that can affect both functional and aesthetic efficiency. Nevertheless, the final shape preserved symmetry between the right and left sides of the skull. Electron microscopy analysis did not indicate the presence of elements other than pure titanium. CONCLUSION: Dimensional variability can be decreased with changes in the manufacturing process (i.e., forming and cutting) and the heating ramp. Despite biomedical characteristics, there was no contamination of the implant by harmful chemical elements. 3D Printing was effective in making the biomodel, enabling pre-operative planning and improving physician-patient communication. Current results indicate that ISF is a process that can be used to obtain custom-made implants.