Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Brazilian Oral Research |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242020000100217 |
Resumo: | Abstract The objective of this study was to evaluate the influence of hydrofluoric acid (HF) concentration, etching time, and application of phosphoric acid (PA) followed by neutralization with sodium bicarbonate on the bond strength between a feldspar ceramic and resin cement. Thus, 80 blocks (10 x 12 x 2 mm) of glass ceramic (VM - Vita Mark II - Vita Zahnfabrik) were made and randomly assigned to eight groups (n = 10) according to the factors: HF concentration (5 and 10%), etching time (60 and 120 s), and use of phosphoric acid (PA) (with and without). According to the experimental group, 37% PA (Condac, FGM) was applied after HF etching for 60s. Afterwards, samples were immersed in sodium bicarbonate for 1 min then in an ultrasonic bath in distilled water (5 min) for cleaning. After surface bonding treatment, cylinders (Ø = 2 mm; h = 2 mm) of dual resin cement (AllCem / FGM) were made in the center of each block. The samples were then stored in water (37ºC) for 90 days and submitted to the shear bond test (50 KgF, 1 mm/min). Failure analysis was performed by stereomicroscope and scanning electron microscopy. Data (MPa) were analyzed with 3-way ANOVA and Tukey’s test. Only the factor “HF concentration” was significant (p = 0.02). Most failures were of cohesive in ceramic (40%) and mixed types (42.5%). The 10% HF resulted in higher shear bond strength value than the 5% HF. Surface cleaning with phosphoric acid followed by sodium bicarbonate and HF time (60 or 120 seconds) did not influence the resin bond strength to feldspar ceramic. |
id |
SBPQO-1_bc223aa7e9f9f0e497496d58eb2e30e6 |
---|---|
oai_identifier_str |
oai:scielo:S1806-83242020000100217 |
network_acronym_str |
SBPQO-1 |
network_name_str |
Brazilian Oral Research |
repository_id_str |
|
spelling |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramicsHydrofluoric AcidCeramicsShear StrengthAbstract The objective of this study was to evaluate the influence of hydrofluoric acid (HF) concentration, etching time, and application of phosphoric acid (PA) followed by neutralization with sodium bicarbonate on the bond strength between a feldspar ceramic and resin cement. Thus, 80 blocks (10 x 12 x 2 mm) of glass ceramic (VM - Vita Mark II - Vita Zahnfabrik) were made and randomly assigned to eight groups (n = 10) according to the factors: HF concentration (5 and 10%), etching time (60 and 120 s), and use of phosphoric acid (PA) (with and without). According to the experimental group, 37% PA (Condac, FGM) was applied after HF etching for 60s. Afterwards, samples were immersed in sodium bicarbonate for 1 min then in an ultrasonic bath in distilled water (5 min) for cleaning. After surface bonding treatment, cylinders (Ø = 2 mm; h = 2 mm) of dual resin cement (AllCem / FGM) were made in the center of each block. The samples were then stored in water (37ºC) for 90 days and submitted to the shear bond test (50 KgF, 1 mm/min). Failure analysis was performed by stereomicroscope and scanning electron microscopy. Data (MPa) were analyzed with 3-way ANOVA and Tukey’s test. Only the factor “HF concentration” was significant (p = 0.02). Most failures were of cohesive in ceramic (40%) and mixed types (42.5%). The 10% HF resulted in higher shear bond strength value than the 5% HF. Surface cleaning with phosphoric acid followed by sodium bicarbonate and HF time (60 or 120 seconds) did not influence the resin bond strength to feldspar ceramic.Sociedade Brasileira de Pesquisa Odontológica - SBPqO2020-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242020000100217Brazilian Oral Research v.34 2020reponame:Brazilian Oral Researchinstname:Sociedade Brasileira de Pesquisa Odontológica (SBPqO)instacron:SBPQO10.1590/1807-3107bor-2020.vol34.0018info:eu-repo/semantics/openAccessMOURA,Dayanne Monielle DuarteARAÚJO,Arthur Magno Medeiros deSOUZA,Karina Barbosa deVERÍSSIMO,Aretha HeitorTRIBST,João Paulo MendesSOUZA,Rodrigo Othávio de Assunção eeng2020-03-12T00:00:00Zoai:scielo:S1806-83242020000100217Revistahttps://www.scielo.br/j/bor/https://old.scielo.br/oai/scielo-oai.phppob@edu.usp.br||bor@sbpqo.org.br1807-31071806-8324opendoar:2020-03-12T00:00Brazilian Oral Research - Sociedade Brasileira de Pesquisa Odontológica (SBPqO)false |
dc.title.none.fl_str_mv |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
title |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
spellingShingle |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics MOURA,Dayanne Monielle Duarte Hydrofluoric Acid Ceramics Shear Strength |
title_short |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
title_full |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
title_fullStr |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
title_full_unstemmed |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
title_sort |
Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics |
author |
MOURA,Dayanne Monielle Duarte |
author_facet |
MOURA,Dayanne Monielle Duarte ARAÚJO,Arthur Magno Medeiros de SOUZA,Karina Barbosa de VERÍSSIMO,Aretha Heitor TRIBST,João Paulo Mendes SOUZA,Rodrigo Othávio de Assunção e |
author_role |
author |
author2 |
ARAÚJO,Arthur Magno Medeiros de SOUZA,Karina Barbosa de VERÍSSIMO,Aretha Heitor TRIBST,João Paulo Mendes SOUZA,Rodrigo Othávio de Assunção e |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
MOURA,Dayanne Monielle Duarte ARAÚJO,Arthur Magno Medeiros de SOUZA,Karina Barbosa de VERÍSSIMO,Aretha Heitor TRIBST,João Paulo Mendes SOUZA,Rodrigo Othávio de Assunção e |
dc.subject.por.fl_str_mv |
Hydrofluoric Acid Ceramics Shear Strength |
topic |
Hydrofluoric Acid Ceramics Shear Strength |
description |
Abstract The objective of this study was to evaluate the influence of hydrofluoric acid (HF) concentration, etching time, and application of phosphoric acid (PA) followed by neutralization with sodium bicarbonate on the bond strength between a feldspar ceramic and resin cement. Thus, 80 blocks (10 x 12 x 2 mm) of glass ceramic (VM - Vita Mark II - Vita Zahnfabrik) were made and randomly assigned to eight groups (n = 10) according to the factors: HF concentration (5 and 10%), etching time (60 and 120 s), and use of phosphoric acid (PA) (with and without). According to the experimental group, 37% PA (Condac, FGM) was applied after HF etching for 60s. Afterwards, samples were immersed in sodium bicarbonate for 1 min then in an ultrasonic bath in distilled water (5 min) for cleaning. After surface bonding treatment, cylinders (Ø = 2 mm; h = 2 mm) of dual resin cement (AllCem / FGM) were made in the center of each block. The samples were then stored in water (37ºC) for 90 days and submitted to the shear bond test (50 KgF, 1 mm/min). Failure analysis was performed by stereomicroscope and scanning electron microscopy. Data (MPa) were analyzed with 3-way ANOVA and Tukey’s test. Only the factor “HF concentration” was significant (p = 0.02). Most failures were of cohesive in ceramic (40%) and mixed types (42.5%). The 10% HF resulted in higher shear bond strength value than the 5% HF. Surface cleaning with phosphoric acid followed by sodium bicarbonate and HF time (60 or 120 seconds) did not influence the resin bond strength to feldspar ceramic. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-01-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242020000100217 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242020000100217 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/1807-3107bor-2020.vol34.0018 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
Sociedade Brasileira de Pesquisa Odontológica - SBPqO |
publisher.none.fl_str_mv |
Sociedade Brasileira de Pesquisa Odontológica - SBPqO |
dc.source.none.fl_str_mv |
Brazilian Oral Research v.34 2020 reponame:Brazilian Oral Research instname:Sociedade Brasileira de Pesquisa Odontológica (SBPqO) instacron:SBPQO |
instname_str |
Sociedade Brasileira de Pesquisa Odontológica (SBPqO) |
instacron_str |
SBPQO |
institution |
SBPQO |
reponame_str |
Brazilian Oral Research |
collection |
Brazilian Oral Research |
repository.name.fl_str_mv |
Brazilian Oral Research - Sociedade Brasileira de Pesquisa Odontológica (SBPqO) |
repository.mail.fl_str_mv |
pob@edu.usp.br||bor@sbpqo.org.br |
_version_ |
1750318327032446976 |