Effectiveness of high speed instrument and air abrasion on different dental substrates
Autor(a) principal: | |
---|---|
Data de Publicação: | 2008 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Brazilian Oral Research |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242008000300008 |
Resumo: | The aim of this study was to compare the effectiveness of high speed (HS) and air abrasion (AA) instruments on groups of teeth (deciduous, permanent, bovine), in terms of preparation time, topography and presence of smear layer. Each group consisted of 5 teeth that had their buccal/lingual surfaces prepared by using either HS or AA. All procedures were standardized and timed. The teeth were then sectioned and prepared for evaluation of both the topography and the presence of smear layer by scanning electron microscopy. As regards preparation time, HS yielded preparations 1.5 times quicker than AA did on the three types of dental substrates (Wilcoxon test, p < 0.05). In both techniques (Kruskal-Wallis Test, p < 0.05) the preparation time was influenced by the dental substrate, particularly in deciduous teeth (Mann-Whitney test with Bonferoni's correction, p < 0.017), which required a longer preparation time. In the descriptive analysis of the topography, no difference was found between the substrates. Nonetheless, the different instruments used determined distinctive topographies. Both techniques produced a smear layer (χ2 McNemar, p > 0.05) in all substrates, but with different formations. In conclusion, the HS instrument was found to be more rapid than the AA. No difference was found between the three dental substrates as regards both the topography and the presence of smear layer. The differences found in the present study were only in relation to the effects of each instrument used. |
id |
SBPQO-1_e7c2ff88bd76a62c402aa111e38b7000 |
---|---|
oai_identifier_str |
oai:scielo:S1806-83242008000300008 |
network_acronym_str |
SBPQO-1 |
network_name_str |
Brazilian Oral Research |
repository_id_str |
|
spelling |
Effectiveness of high speed instrument and air abrasion on different dental substratesTooth preparationAir abrasion, dentalTooth, deciduousMicroscopy, electron, scanningIn vitroThe aim of this study was to compare the effectiveness of high speed (HS) and air abrasion (AA) instruments on groups of teeth (deciduous, permanent, bovine), in terms of preparation time, topography and presence of smear layer. Each group consisted of 5 teeth that had their buccal/lingual surfaces prepared by using either HS or AA. All procedures were standardized and timed. The teeth were then sectioned and prepared for evaluation of both the topography and the presence of smear layer by scanning electron microscopy. As regards preparation time, HS yielded preparations 1.5 times quicker than AA did on the three types of dental substrates (Wilcoxon test, p < 0.05). In both techniques (Kruskal-Wallis Test, p < 0.05) the preparation time was influenced by the dental substrate, particularly in deciduous teeth (Mann-Whitney test with Bonferoni's correction, p < 0.017), which required a longer preparation time. In the descriptive analysis of the topography, no difference was found between the substrates. Nonetheless, the different instruments used determined distinctive topographies. Both techniques produced a smear layer (χ2 McNemar, p > 0.05) in all substrates, but with different formations. In conclusion, the HS instrument was found to be more rapid than the AA. No difference was found between the three dental substrates as regards both the topography and the presence of smear layer. The differences found in the present study were only in relation to the effects of each instrument used.Sociedade Brasileira de Pesquisa Odontológica - SBPqO2008-09-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242008000300008Brazilian Oral Research v.22 n.3 2008reponame:Brazilian Oral Researchinstname:Sociedade Brasileira de Pesquisa Odontológica (SBPqO)instacron:SBPQO10.1590/S1806-83242008000300008info:eu-repo/semantics/openAccessAntunes,Lívia Azeredo AlvesPedro,Rafael LimaVieira,Áurea Simone BarrôsoMaia,Lucianne Copleeng2009-10-20T00:00:00Zoai:scielo:S1806-83242008000300008Revistahttps://www.scielo.br/j/bor/https://old.scielo.br/oai/scielo-oai.phppob@edu.usp.br||bor@sbpqo.org.br1807-31071806-8324opendoar:2009-10-20T00:00Brazilian Oral Research - Sociedade Brasileira de Pesquisa Odontológica (SBPqO)false |
dc.title.none.fl_str_mv |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
title |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
spellingShingle |
Effectiveness of high speed instrument and air abrasion on different dental substrates Antunes,Lívia Azeredo Alves Tooth preparation Air abrasion, dental Tooth, deciduous Microscopy, electron, scanning In vitro |
title_short |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
title_full |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
title_fullStr |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
title_full_unstemmed |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
title_sort |
Effectiveness of high speed instrument and air abrasion on different dental substrates |
author |
Antunes,Lívia Azeredo Alves |
author_facet |
Antunes,Lívia Azeredo Alves Pedro,Rafael Lima Vieira,Áurea Simone Barrôso Maia,Lucianne Cople |
author_role |
author |
author2 |
Pedro,Rafael Lima Vieira,Áurea Simone Barrôso Maia,Lucianne Cople |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Antunes,Lívia Azeredo Alves Pedro,Rafael Lima Vieira,Áurea Simone Barrôso Maia,Lucianne Cople |
dc.subject.por.fl_str_mv |
Tooth preparation Air abrasion, dental Tooth, deciduous Microscopy, electron, scanning In vitro |
topic |
Tooth preparation Air abrasion, dental Tooth, deciduous Microscopy, electron, scanning In vitro |
description |
The aim of this study was to compare the effectiveness of high speed (HS) and air abrasion (AA) instruments on groups of teeth (deciduous, permanent, bovine), in terms of preparation time, topography and presence of smear layer. Each group consisted of 5 teeth that had their buccal/lingual surfaces prepared by using either HS or AA. All procedures were standardized and timed. The teeth were then sectioned and prepared for evaluation of both the topography and the presence of smear layer by scanning electron microscopy. As regards preparation time, HS yielded preparations 1.5 times quicker than AA did on the three types of dental substrates (Wilcoxon test, p < 0.05). In both techniques (Kruskal-Wallis Test, p < 0.05) the preparation time was influenced by the dental substrate, particularly in deciduous teeth (Mann-Whitney test with Bonferoni's correction, p < 0.017), which required a longer preparation time. In the descriptive analysis of the topography, no difference was found between the substrates. Nonetheless, the different instruments used determined distinctive topographies. Both techniques produced a smear layer (χ2 McNemar, p > 0.05) in all substrates, but with different formations. In conclusion, the HS instrument was found to be more rapid than the AA. No difference was found between the three dental substrates as regards both the topography and the presence of smear layer. The differences found in the present study were only in relation to the effects of each instrument used. |
publishDate |
2008 |
dc.date.none.fl_str_mv |
2008-09-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242008000300008 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1806-83242008000300008 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/S1806-83242008000300008 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
Sociedade Brasileira de Pesquisa Odontológica - SBPqO |
publisher.none.fl_str_mv |
Sociedade Brasileira de Pesquisa Odontológica - SBPqO |
dc.source.none.fl_str_mv |
Brazilian Oral Research v.22 n.3 2008 reponame:Brazilian Oral Research instname:Sociedade Brasileira de Pesquisa Odontológica (SBPqO) instacron:SBPQO |
instname_str |
Sociedade Brasileira de Pesquisa Odontológica (SBPqO) |
instacron_str |
SBPQO |
institution |
SBPQO |
reponame_str |
Brazilian Oral Research |
collection |
Brazilian Oral Research |
repository.name.fl_str_mv |
Brazilian Oral Research - Sociedade Brasileira de Pesquisa Odontológica (SBPqO) |
repository.mail.fl_str_mv |
pob@edu.usp.br||bor@sbpqo.org.br |
_version_ |
1750318321279959040 |