Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.

Detalhes bibliográficos
Autor(a) principal: Sader, Leandro Takano
Data de Publicação: 2005
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFSCAR
Texto Completo: https://repositorio.ufscar.br/handle/ufscar/4149
Resumo: This work had as objective studies of the biofilms formation in polymerics particles used as material supports in anaerobic fluidized-bed reactors. Three polymerics supports were tested: polystyrene, PET and PVC, which suffered appropriate acid treatment, in way to provide them superficial characteristics as rugosity, porosity and favorable electric charge, with the purpose of favoring the microbial adhesion. The reactors were inoculated with sludge originating from reactor UASB that treated swine slaughterhouse residue, adapted to the degradation of the phenol by 150 days. The volume of the reactors was of 770cm3, and they operated with ascendant speed of 1,3 times of the flow rate of the minimum fluidization. The phenol concentration varied from 100 to 400mg/L in the feeding of each system, presenting results of removal of phenol of 97%, 98% and 97,5% and removal of DQO of 84%, 88,5% and 87%, respectively for the reactors with polystyrene, PET and PVC, which operated with time of detention hydraulic relative the height of the bed, corresponding to the reactional volume of the reactors (TDHr) of 22 h, 10,6 h and 20,4 h, respectively. The quantification of extracellular polymeric showed better results for the particles of PVC that it presented 0,2 mgCarbohydrate/gParticle and 0,06 mgProteyn/gParticle. However, deformations in those particles harming the acting of the reactor, defining as better support the particles of PET, and in this reactor the percentage of phenol removal was larger for a smaller TDHr.
id SCAR_a46101db3384a6f7f7b704eaf02574b2
oai_identifier_str oai:repositorio.ufscar.br:ufscar/4149
network_acronym_str SCAR
network_name_str Repositório Institucional da UFSCAR
repository_id_str 4322
spelling Sader, Leandro TakanoSilva, Edson Luizhttp://genos.cnpq.br:12010/dwlattes/owa/prc_imp_cv_int?f_cod=K4791192Y4http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4764930E315335d35-302d-4cbf-a84f-651f72465ba62016-06-02T19:56:56Z2005-06-162016-06-02T19:56:56Z2005-03-24SADER, Leandro Takano. Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.. 2005. 158 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2005.https://repositorio.ufscar.br/handle/ufscar/4149This work had as objective studies of the biofilms formation in polymerics particles used as material supports in anaerobic fluidized-bed reactors. Three polymerics supports were tested: polystyrene, PET and PVC, which suffered appropriate acid treatment, in way to provide them superficial characteristics as rugosity, porosity and favorable electric charge, with the purpose of favoring the microbial adhesion. The reactors were inoculated with sludge originating from reactor UASB that treated swine slaughterhouse residue, adapted to the degradation of the phenol by 150 days. The volume of the reactors was of 770cm3, and they operated with ascendant speed of 1,3 times of the flow rate of the minimum fluidization. The phenol concentration varied from 100 to 400mg/L in the feeding of each system, presenting results of removal of phenol of 97%, 98% and 97,5% and removal of DQO of 84%, 88,5% and 87%, respectively for the reactors with polystyrene, PET and PVC, which operated with time of detention hydraulic relative the height of the bed, corresponding to the reactional volume of the reactors (TDHr) of 22 h, 10,6 h and 20,4 h, respectively. The quantification of extracellular polymeric showed better results for the particles of PVC that it presented 0,2 mgCarbohydrate/gParticle and 0,06 mgProteyn/gParticle. However, deformations in those particles harming the acting of the reactor, defining as better support the particles of PET, and in this reactor the percentage of phenol removal was larger for a smaller TDHr.Este trabalho teve como objetivo estudar da formação de biofilmes em partículas poliméricas usadas como meio suporte em reatores anaeróbios de leito fluidizado. Foram testados 3 suportes poliméricos: poliestireno, PET e PVC, os quais sofreram tratamento ácido adequado, de modo a proporcionar-lhes características superficiais como rugosidade, porosidade e carga elétrica favorável, com a finalidade de favorecer a adesão microbiana. Os reatores foram inoculados com lodo proveniente de reator UASB que tratava resíduo de suinocultura, adaptado à degradação do fenol por 150 dias. O volume dos reatores era de 770cm3, e operaram com velocidade ascensional igual a 1,3 vezes da vazão de mínima fluidização. A concentração de fenol variou de 100 a 400mg/L na alimentação de cada sistema, apresentando resultados de remoção de fenol de 97%, 98% e 97,5% e remoção de DQO de 84%, 88,5% e 87%, respectivamente para os reatores com poliestireno, PET e PVC, os quais operaram com tempo de detenção hidráulico relativo a altura do leito, correspondente ao volume reacional dos reatores (TDHr) de 22 h, 10,6 h e 20,4h, respectivamente. A quantificação de polímeros extracelulares mostrou melhores resultados para as partículas de PVC que apresentou 0,2 mgCarboidrato/gPartícula e 0,06 mgProteina/gPartícula. No entanto, deformações nessas partículas prejudicaram o desempenho do reator, definindo como melhor suporte as partículas de PET, sendo que neste reator a porcentagem de remoção de fenol foi maior para um menor TDHr.Universidade Federal de Minas Geraisapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Engenharia Química - PPGEQUFSCarBRBiotecnologiaProcesso anaeróbioLeito fluidizadoFenolBiofilmeProcess anaeróbioFluidized bedPhenol and biofilmENGENHARIAS::ENGENHARIA QUIMICAAvaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-1-1a97a1394-e7be-4391-bdc1-1698a331652einfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINALDissLTS.pdfapplication/pdf9020125https://repositorio.ufscar.br/bitstream/ufscar/4149/1/DissLTS.pdfe5e1b73c065d46b9f7bb52f9113ba1ddMD51THUMBNAILDissLTS.pdf.jpgDissLTS.pdf.jpgIM Thumbnailimage/jpeg6922https://repositorio.ufscar.br/bitstream/ufscar/4149/2/DissLTS.pdf.jpga50ec8f3a194bf0696261dca667752b9MD52ufscar/41492023-09-18 18:30:59.836oai:repositorio.ufscar.br:ufscar/4149Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:30:59Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false
dc.title.por.fl_str_mv Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
title Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
spellingShingle Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
Sader, Leandro Takano
Biotecnologia
Processo anaeróbio
Leito fluidizado
Fenol
Biofilme
Process anaeróbio
Fluidized bed
Phenol and biofilm
ENGENHARIAS::ENGENHARIA QUIMICA
title_short Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
title_full Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
title_fullStr Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
title_full_unstemmed Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
title_sort Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.
author Sader, Leandro Takano
author_facet Sader, Leandro Takano
author_role author
dc.contributor.authorlattes.por.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4764930E3
dc.contributor.author.fl_str_mv Sader, Leandro Takano
dc.contributor.advisor1.fl_str_mv Silva, Edson Luiz
dc.contributor.advisor1Lattes.fl_str_mv http://genos.cnpq.br:12010/dwlattes/owa/prc_imp_cv_int?f_cod=K4791192Y4
dc.contributor.authorID.fl_str_mv 15335d35-302d-4cbf-a84f-651f72465ba6
contributor_str_mv Silva, Edson Luiz
dc.subject.por.fl_str_mv Biotecnologia
Processo anaeróbio
Leito fluidizado
Fenol
Biofilme
topic Biotecnologia
Processo anaeróbio
Leito fluidizado
Fenol
Biofilme
Process anaeróbio
Fluidized bed
Phenol and biofilm
ENGENHARIAS::ENGENHARIA QUIMICA
dc.subject.eng.fl_str_mv Process anaeróbio
Fluidized bed
Phenol and biofilm
dc.subject.cnpq.fl_str_mv ENGENHARIAS::ENGENHARIA QUIMICA
description This work had as objective studies of the biofilms formation in polymerics particles used as material supports in anaerobic fluidized-bed reactors. Three polymerics supports were tested: polystyrene, PET and PVC, which suffered appropriate acid treatment, in way to provide them superficial characteristics as rugosity, porosity and favorable electric charge, with the purpose of favoring the microbial adhesion. The reactors were inoculated with sludge originating from reactor UASB that treated swine slaughterhouse residue, adapted to the degradation of the phenol by 150 days. The volume of the reactors was of 770cm3, and they operated with ascendant speed of 1,3 times of the flow rate of the minimum fluidization. The phenol concentration varied from 100 to 400mg/L in the feeding of each system, presenting results of removal of phenol of 97%, 98% and 97,5% and removal of DQO of 84%, 88,5% and 87%, respectively for the reactors with polystyrene, PET and PVC, which operated with time of detention hydraulic relative the height of the bed, corresponding to the reactional volume of the reactors (TDHr) of 22 h, 10,6 h and 20,4 h, respectively. The quantification of extracellular polymeric showed better results for the particles of PVC that it presented 0,2 mgCarbohydrate/gParticle and 0,06 mgProteyn/gParticle. However, deformations in those particles harming the acting of the reactor, defining as better support the particles of PET, and in this reactor the percentage of phenol removal was larger for a smaller TDHr.
publishDate 2005
dc.date.available.fl_str_mv 2005-06-16
2016-06-02T19:56:56Z
dc.date.issued.fl_str_mv 2005-03-24
dc.date.accessioned.fl_str_mv 2016-06-02T19:56:56Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv SADER, Leandro Takano. Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.. 2005. 158 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2005.
dc.identifier.uri.fl_str_mv https://repositorio.ufscar.br/handle/ufscar/4149
identifier_str_mv SADER, Leandro Takano. Avaliação de partículas poliméricas como material suporte em reator anaeróbio de leito fluidizado no tratamento de fenol.. 2005. 158 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2005.
url https://repositorio.ufscar.br/handle/ufscar/4149
dc.language.iso.fl_str_mv por
language por
dc.relation.confidence.fl_str_mv -1
-1
dc.relation.authority.fl_str_mv a97a1394-e7be-4391-bdc1-1698a331652e
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia Química - PPGEQ
dc.publisher.initials.fl_str_mv UFSCar
dc.publisher.country.fl_str_mv BR
publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFSCAR
instname:Universidade Federal de São Carlos (UFSCAR)
instacron:UFSCAR
instname_str Universidade Federal de São Carlos (UFSCAR)
instacron_str UFSCAR
institution UFSCAR
reponame_str Repositório Institucional da UFSCAR
collection Repositório Institucional da UFSCAR
bitstream.url.fl_str_mv https://repositorio.ufscar.br/bitstream/ufscar/4149/1/DissLTS.pdf
https://repositorio.ufscar.br/bitstream/ufscar/4149/2/DissLTS.pdf.jpg
bitstream.checksum.fl_str_mv e5e1b73c065d46b9f7bb52f9113ba1dd
a50ec8f3a194bf0696261dca667752b9
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)
repository.mail.fl_str_mv
_version_ 1802136273035460608