Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFSCAR |
Texto Completo: | https://repositorio.ufscar.br/handle/ufscar/700 |
Resumo: | Refractory castables are multiphase materials usually exhibiting complex heterogeneous microstructures, which have their mechanical strength affected by chemical and structural changes. These microstructural changes directly affect the Young s modulus, as this property is strongly dependent on the chemical bonds, crystalline structure and flaws, such as porosity and cracks. For the Al2O3-MgO system, two transformations can be highlighted: the volumetric expansion associated with the magnesia hydration and the in situ spinel formation, both can play a role by increasing or decreasing the castable s embrittlement depending on the resulting expansion. Considering this aspect, the addition of MgO sources with different reactivity in refractory castables was evaluated during curing and drying steps. As a result, different routes for magnesia s sources addition to the castables, without the usual damage caused by MgO hydration, are presented in this work. The addition of acetic acid sped up the brucite precipitation, inducing the formation of a resilient structure able to inhibit the stresses generation. Additionally, the effect of mineralizing or densification compounds on spinel-forming castables and the microstructural evolution of refractory castables containing different MgO sources, colloidal binders or high-carbon content were assessed during the thermal treatment by hot Young s modulus measurements using the resonance bar technique. The attained results highlight the technique s broad feature and accuracy for the development of refractory materials. The MgF2 and magnesium borate addition sped up the spinel formation, whereas TiO2 led to lower expansion values and greater rigidity at high temperatures, all of them as promising alternatives to master the castable s microstructure design. For the nano-bonded castables, the sintering additive addition further enhanced the Young s modulus resulting in high-performance refractories. Additionally, the elastic modulus measurements were able to evaluate the antioxidants effect in high-carbon containing castables and to identify the mechanisms of crack healing (during heating) and opening (during cooling). |
id |
SCAR_ab85d419195a17e8f0a226c10c366837 |
---|---|
oai_identifier_str |
oai:repositorio.ufscar.br:ufscar/700 |
network_acronym_str |
SCAR |
network_name_str |
Repositório Institucional da UFSCAR |
repository_id_str |
4322 |
spelling |
Souza, Tiago Marcolino dePandolfelli, Victor Carloshttp://lattes.cnpq.br/7369376873984839http://lattes.cnpq.br/630219400611305904bf1034-611f-4359-9c1c-f90126e50ad22016-06-02T19:10:12Z2012-11-292016-06-02T19:10:12Z2012-09-12SOUZA, Tiago Marcolino de. Elastic modulus as a tool for evaluating in situ transformations and for the development of refractory castables abstract. 2012. 296 f. Tese (Doutorado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2012.https://repositorio.ufscar.br/handle/ufscar/700Refractory castables are multiphase materials usually exhibiting complex heterogeneous microstructures, which have their mechanical strength affected by chemical and structural changes. These microstructural changes directly affect the Young s modulus, as this property is strongly dependent on the chemical bonds, crystalline structure and flaws, such as porosity and cracks. For the Al2O3-MgO system, two transformations can be highlighted: the volumetric expansion associated with the magnesia hydration and the in situ spinel formation, both can play a role by increasing or decreasing the castable s embrittlement depending on the resulting expansion. Considering this aspect, the addition of MgO sources with different reactivity in refractory castables was evaluated during curing and drying steps. As a result, different routes for magnesia s sources addition to the castables, without the usual damage caused by MgO hydration, are presented in this work. The addition of acetic acid sped up the brucite precipitation, inducing the formation of a resilient structure able to inhibit the stresses generation. Additionally, the effect of mineralizing or densification compounds on spinel-forming castables and the microstructural evolution of refractory castables containing different MgO sources, colloidal binders or high-carbon content were assessed during the thermal treatment by hot Young s modulus measurements using the resonance bar technique. The attained results highlight the technique s broad feature and accuracy for the development of refractory materials. The MgF2 and magnesium borate addition sped up the spinel formation, whereas TiO2 led to lower expansion values and greater rigidity at high temperatures, all of them as promising alternatives to master the castable s microstructure design. For the nano-bonded castables, the sintering additive addition further enhanced the Young s modulus resulting in high-performance refractories. Additionally, the elastic modulus measurements were able to evaluate the antioxidants effect in high-carbon containing castables and to identify the mechanisms of crack healing (during heating) and opening (during cooling).Concretos refratários são materiais multifásicos que normalmente apresentam uma estrutura heterogênea e complexa, cuja resistência mecânica é afetada por mudanças químicas e estruturais. Estas transformações microestruturais afetam diretamente o módulo elástico, visto que esta propriedade está relacionada ao tipo de ligação química, estrutura cristalina e defeitos, tais como porosidade e trincas. No caso de concretos Al2O3-MgO, duas transformações merecem destaque: a primeira é a hidratação da magnésia e a segunda a formação de espinélio in situ. Ambas as reações podem contribuir positivamente ou negativamente com a rigidez dependendo da acomodação da expansão gerada. Neste trabalho, fontes de magnésia com reatividades distintas foram avaliadas durante a cura e secagem de concretos refratários. Os resultados obtidos indicaram rotas para incorporação de diferentes fontes de MgO as composições refratárias sem os danos decorrentes da hidratação. A adição de ácido acético acelerou a precipitação de brucita, induzindo a formação de uma estrutura mais resiliente, capaz de inibir a geração de tensões. O efeito de aditivos na espinelização e outras transformações in situ em concretos aluminosos, nanoligados ou contendo alto teor de carbono foram acompanhadas utilizando-se medidas de módulo elástico a quente, destacando a precisão e o caráter abrangente desta técnica para o desenvolvimento de novos materiais. A adição de MgF2 e boromagnésio promoveu uma grande aceleração da espinelização, enquanto o TiO2 apresentou um efeito moderado, mas resultou em maior rigidez em temperaturas elevadas. Sendo assim, estes três aditivos são promissores para o desenvolvimento de concretos espinelizados. Para os materiais nanoligados, verificou-se que adição de um agente sinterizante promoveu um grande aumento da rigidez, resultando em refratários de alto desempenho. Adicionalmente, as medidas de módulo elástico a quente mostraram-se adequadas para avaliar o efeito de anti-oxidantes em concretos com elevado teor de carbono e o processo de fechamento e abertura de trincas durante os ciclos de aquecimento e resfriamento, respectivamente.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEMUFSCarBRCerâmicaElasticidadeConcretos refratáriosÓxido de magnésioENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAMódulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratáriosElastic modulus as a tool for evaluating in situ transformations and for the development of refractory castables abstractinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesis-1-1390bd4d1-c505-4015-b043-b075d197c61finfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINAL4708.pdfapplication/pdf12268943https://repositorio.ufscar.br/bitstream/ufscar/700/1/4708.pdf29b57952973cc3f28aed7dccb94a9d6dMD51TEXT4708.pdf.txt4708.pdf.txtExtracted texttext/plain0https://repositorio.ufscar.br/bitstream/ufscar/700/2/4708.pdf.txtd41d8cd98f00b204e9800998ecf8427eMD52THUMBNAIL4708.pdf.jpg4708.pdf.jpgIM Thumbnailimage/jpeg6748https://repositorio.ufscar.br/bitstream/ufscar/700/3/4708.pdf.jpg81f3b12a6a82785dcc9abdd59a37da95MD53ufscar/7002023-09-18 18:31:28.098oai:repositorio.ufscar.br:ufscar/700Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:31:28Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.por.fl_str_mv |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
dc.title.alternative.eng.fl_str_mv |
Elastic modulus as a tool for evaluating in situ transformations and for the development of refractory castables abstract |
title |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
spellingShingle |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários Souza, Tiago Marcolino de Cerâmica Elasticidade Concretos refratários Óxido de magnésio ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
title_full |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
title_fullStr |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
title_full_unstemmed |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
title_sort |
Módulo elástico como ferramenta para o acompanhamento de transformações in situ e desenvolvimento de concretos refratários |
author |
Souza, Tiago Marcolino de |
author_facet |
Souza, Tiago Marcolino de |
author_role |
author |
dc.contributor.authorlattes.por.fl_str_mv |
http://lattes.cnpq.br/6302194006113059 |
dc.contributor.author.fl_str_mv |
Souza, Tiago Marcolino de |
dc.contributor.advisor1.fl_str_mv |
Pandolfelli, Victor Carlos |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/7369376873984839 |
dc.contributor.authorID.fl_str_mv |
04bf1034-611f-4359-9c1c-f90126e50ad2 |
contributor_str_mv |
Pandolfelli, Victor Carlos |
dc.subject.por.fl_str_mv |
Cerâmica Elasticidade Concretos refratários Óxido de magnésio |
topic |
Cerâmica Elasticidade Concretos refratários Óxido de magnésio ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
Refractory castables are multiphase materials usually exhibiting complex heterogeneous microstructures, which have their mechanical strength affected by chemical and structural changes. These microstructural changes directly affect the Young s modulus, as this property is strongly dependent on the chemical bonds, crystalline structure and flaws, such as porosity and cracks. For the Al2O3-MgO system, two transformations can be highlighted: the volumetric expansion associated with the magnesia hydration and the in situ spinel formation, both can play a role by increasing or decreasing the castable s embrittlement depending on the resulting expansion. Considering this aspect, the addition of MgO sources with different reactivity in refractory castables was evaluated during curing and drying steps. As a result, different routes for magnesia s sources addition to the castables, without the usual damage caused by MgO hydration, are presented in this work. The addition of acetic acid sped up the brucite precipitation, inducing the formation of a resilient structure able to inhibit the stresses generation. Additionally, the effect of mineralizing or densification compounds on spinel-forming castables and the microstructural evolution of refractory castables containing different MgO sources, colloidal binders or high-carbon content were assessed during the thermal treatment by hot Young s modulus measurements using the resonance bar technique. The attained results highlight the technique s broad feature and accuracy for the development of refractory materials. The MgF2 and magnesium borate addition sped up the spinel formation, whereas TiO2 led to lower expansion values and greater rigidity at high temperatures, all of them as promising alternatives to master the castable s microstructure design. For the nano-bonded castables, the sintering additive addition further enhanced the Young s modulus resulting in high-performance refractories. Additionally, the elastic modulus measurements were able to evaluate the antioxidants effect in high-carbon containing castables and to identify the mechanisms of crack healing (during heating) and opening (during cooling). |
publishDate |
2012 |
dc.date.available.fl_str_mv |
2012-11-29 2016-06-02T19:10:12Z |
dc.date.issued.fl_str_mv |
2012-09-12 |
dc.date.accessioned.fl_str_mv |
2016-06-02T19:10:12Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SOUZA, Tiago Marcolino de. Elastic modulus as a tool for evaluating in situ transformations and for the development of refractory castables abstract. 2012. 296 f. Tese (Doutorado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2012. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufscar.br/handle/ufscar/700 |
identifier_str_mv |
SOUZA, Tiago Marcolino de. Elastic modulus as a tool for evaluating in situ transformations and for the development of refractory castables abstract. 2012. 296 f. Tese (Doutorado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2012. |
url |
https://repositorio.ufscar.br/handle/ufscar/700 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.confidence.fl_str_mv |
-1 -1 |
dc.relation.authority.fl_str_mv |
390bd4d1-c505-4015-b043-b075d197c61f |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM |
dc.publisher.initials.fl_str_mv |
UFSCar |
dc.publisher.country.fl_str_mv |
BR |
publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFSCAR instname:Universidade Federal de São Carlos (UFSCAR) instacron:UFSCAR |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
UFSCAR |
institution |
UFSCAR |
reponame_str |
Repositório Institucional da UFSCAR |
collection |
Repositório Institucional da UFSCAR |
bitstream.url.fl_str_mv |
https://repositorio.ufscar.br/bitstream/ufscar/700/1/4708.pdf https://repositorio.ufscar.br/bitstream/ufscar/700/2/4708.pdf.txt https://repositorio.ufscar.br/bitstream/ufscar/700/3/4708.pdf.jpg |
bitstream.checksum.fl_str_mv |
29b57952973cc3f28aed7dccb94a9d6d d41d8cd98f00b204e9800998ecf8427e 81f3b12a6a82785dcc9abdd59a37da95 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
|
_version_ |
1802136246460350464 |