Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro
Autor(a) principal: | |
---|---|
Data de Publicação: | 2009 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFSCAR |
Texto Completo: | https://repositorio.ufscar.br/handle/ufscar/4014 |
Resumo: | The pneumatic conveyor using a spouted bed as a particle feeding method has been studied in the past years in the Centro de Secagem/DEQ/UFSCar. In the literature there are some studies related to the fluid dynamics behavior of this type of conveyor, which can be found in the following works: Ferreira (1991); Ferreira e Freire (1992); Ferreira (1996), Silva (1997) e Costa, (2001). The aim of this work is: (i) to analyze the fluid dynamics behavior through experimental data obtained for the gas-solid flow in the dense and dilute phase and also, to evaluate the influence of the distance between the inlet of the contactor and the entrance of the conveyor pipe (z0); (ii) to apply the model developed by Zorana et al. (2004) for predicting the pressure, voidage, gas and solids velocity profiles, and compare the simulated and experimental results; (iii) to analyze the influence of the inlet temperature in the fluid dynamics, heat transfer and water evaporation behaviors. In this work glass beads with dp = 2.7 mm and rp = 2500 kg/m3 were used as a particulate phase. In the drying experiments water was used as an ideal suspension. The average and the standard deviation of the experimental variables were acquired using a LYNX data acquisition system and a routine made in the LabView software. It was possible to verify that the different z0 (5.0, 5.5, 6.0 e 6.5 cm) studied here influenced significantly the fluid dynamic behavior. Also, the dense and dilute regimes were identified by analyzing the experimental pressure gradients. The model used in this work was able to predict the experimental data satisfactorily. Although a significant influence of the air inlet temperature in the fluid dynamics and heat transfer behaviors was not observed in the range (80 and 100 ºC) studied here, it does affect the water evaporation rate, which was higher for the highest temperature. |
id |
SCAR_cadda55d1fd9d1b097f81e41e5fd0df0 |
---|---|
oai_identifier_str |
oai:repositorio.ufscar.br:ufscar/4014 |
network_acronym_str |
SCAR |
network_name_str |
Repositório Institucional da UFSCAR |
repository_id_str |
4322 |
spelling |
Sousa, Robson Costa deFreire, José Teixeirahttp://lattes.cnpq.br/2270677706718167http://lattes.cnpq.br/732058605514201386d650db-619f-46c4-b79a-8b6a2fc032ca2016-06-02T19:56:34Z2009-09-012016-06-02T19:56:34Z2009-08-05SOUSA, Robson Costa de. Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro. 2009. 102 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2009.https://repositorio.ufscar.br/handle/ufscar/4014The pneumatic conveyor using a spouted bed as a particle feeding method has been studied in the past years in the Centro de Secagem/DEQ/UFSCar. In the literature there are some studies related to the fluid dynamics behavior of this type of conveyor, which can be found in the following works: Ferreira (1991); Ferreira e Freire (1992); Ferreira (1996), Silva (1997) e Costa, (2001). The aim of this work is: (i) to analyze the fluid dynamics behavior through experimental data obtained for the gas-solid flow in the dense and dilute phase and also, to evaluate the influence of the distance between the inlet of the contactor and the entrance of the conveyor pipe (z0); (ii) to apply the model developed by Zorana et al. (2004) for predicting the pressure, voidage, gas and solids velocity profiles, and compare the simulated and experimental results; (iii) to analyze the influence of the inlet temperature in the fluid dynamics, heat transfer and water evaporation behaviors. In this work glass beads with dp = 2.7 mm and rp = 2500 kg/m3 were used as a particulate phase. In the drying experiments water was used as an ideal suspension. The average and the standard deviation of the experimental variables were acquired using a LYNX data acquisition system and a routine made in the LabView software. It was possible to verify that the different z0 (5.0, 5.5, 6.0 e 6.5 cm) studied here influenced significantly the fluid dynamic behavior. Also, the dense and dilute regimes were identified by analyzing the experimental pressure gradients. The model used in this work was able to predict the experimental data satisfactorily. Although a significant influence of the air inlet temperature in the fluid dynamics and heat transfer behaviors was not observed in the range (80 and 100 ºC) studied here, it does affect the water evaporation rate, which was higher for the highest temperature.O transportador pneumático com alimentador tipo jorro vem sendo estudado ao longo dos anos no Centro de Secagem do DEQ/UFSCar. Dentro do contexto de informações sobre este tipo de transportador, existem na literatura estudos que tiveram como foco analisar seu comportamento fluidodinâmico, os quais podem ser encontrados nos trabalhos de Ferreira (1991); Ferreira e Freire (1992); Ferreira (1996); Silva (1997) e Costa (2001). O presente trabalho teve como objetivos: (i) analisar o comportamento fluidodinâmico a partir de um estudo experimental no escoamento gás-sólido nos regimes denso e diluído, avaliando a influência da distância entre a base do alimentador tipo jorro e a entrada do tubo de transporte, denominada de z0; (ii) realizar a verificação de um modelo encontrado na literatura, o modelo proposto por Zorana et al. (2004) para descrever os perfis de pressão, porosidade e velocidade dos sólidos no tubo de transporte, e (iii) analisar a influência da temperatura do ar de entrada no comportamento fluidodinâmico, térmico e na evaporação da água. Na realização deste trabalho foram utilizadas esferas de vidro como partículas inertes com densidade igual a 2500 kg/m3 e diâmetro médio de 2,7 mm. Para os ensaios de evaporação foi usada a água considerada como suspensão ideal . Os dados foram obtidos utilizando-se de um sistema de aquisição de dados da marca LYNX constituído por uma placa condicionadora de sinais e uma placa de aquisição de dados. Para a visualização das medidas foi utilizada uma rotina desenvolvida usando o software LabView, o qual forneceu a média e o desvio padrão dos dados de pressão e vazão mássica do ar de entrada. Analisando os dados obtidos de vazão de sólidos, da pressão estática e dos gradientes de pressão foi possível observar que o comportamento fluidodinâmico foi influenciado pelos diferentes z0 utilizados (5,0; 5,5; 6,0 e 6,5 cm). A análise dos dados de gradiente de pressão em função da velocidade superficial do ar permitiu identificar os regimes de escoamento denso e diluído. Os resultados simulados mostraram que o modelo foi capaz de predizer satisfatoriamente o comportamento fluidodinâmico para as condições de entrada utilizadas. Em relação à transferência de calor os resultados mostraram que para a faixa de temperatura do ar investigada a influência não é significativa, pois foram apresentados comportamentos fluidodinâmicos e térmicos semelhantes para ambas as temperaturas, 80 e 100ºC. No caso da evaporação da água foram observados maiores potenciais de evaporação para a maior temperatura do ar de entrada.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Engenharia Química - PPGEQUFSCarBRTransporte por tubo pneumáticoSistemas particuladosAlimentador tipo jorroFluidodinâmicaTransferência de calorSecagemENGENHARIAS::ENGENHARIA QUIMICAEstudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorroinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-1-12e542afc-9fec-43b4-b11a-1eb2ed3a1f3dinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINAL2564.pdfapplication/pdf1333168https://repositorio.ufscar.br/bitstream/ufscar/4014/1/2564.pdf213ea9bc81b936a34a25200c96a96216MD51THUMBNAIL2564.pdf.jpg2564.pdf.jpgIM Thumbnailimage/jpeg5871https://repositorio.ufscar.br/bitstream/ufscar/4014/2/2564.pdf.jpg55fbc60107aa48c79a1275a2fc2e5ac1MD52ufscar/40142023-09-18 18:30:59.316oai:repositorio.ufscar.br:ufscar/4014Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:30:59Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.por.fl_str_mv |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
title |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
spellingShingle |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro Sousa, Robson Costa de Transporte por tubo pneumático Sistemas particulados Alimentador tipo jorro Fluidodinâmica Transferência de calor Secagem ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
title_full |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
title_fullStr |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
title_full_unstemmed |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
title_sort |
Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro |
author |
Sousa, Robson Costa de |
author_facet |
Sousa, Robson Costa de |
author_role |
author |
dc.contributor.authorlattes.por.fl_str_mv |
http://lattes.cnpq.br/7320586055142013 |
dc.contributor.author.fl_str_mv |
Sousa, Robson Costa de |
dc.contributor.advisor1.fl_str_mv |
Freire, José Teixeira |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2270677706718167 |
dc.contributor.authorID.fl_str_mv |
86d650db-619f-46c4-b79a-8b6a2fc032ca |
contributor_str_mv |
Freire, José Teixeira |
dc.subject.por.fl_str_mv |
Transporte por tubo pneumático Sistemas particulados Alimentador tipo jorro Fluidodinâmica Transferência de calor Secagem |
topic |
Transporte por tubo pneumático Sistemas particulados Alimentador tipo jorro Fluidodinâmica Transferência de calor Secagem ENGENHARIAS::ENGENHARIA QUIMICA |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA QUIMICA |
description |
The pneumatic conveyor using a spouted bed as a particle feeding method has been studied in the past years in the Centro de Secagem/DEQ/UFSCar. In the literature there are some studies related to the fluid dynamics behavior of this type of conveyor, which can be found in the following works: Ferreira (1991); Ferreira e Freire (1992); Ferreira (1996), Silva (1997) e Costa, (2001). The aim of this work is: (i) to analyze the fluid dynamics behavior through experimental data obtained for the gas-solid flow in the dense and dilute phase and also, to evaluate the influence of the distance between the inlet of the contactor and the entrance of the conveyor pipe (z0); (ii) to apply the model developed by Zorana et al. (2004) for predicting the pressure, voidage, gas and solids velocity profiles, and compare the simulated and experimental results; (iii) to analyze the influence of the inlet temperature in the fluid dynamics, heat transfer and water evaporation behaviors. In this work glass beads with dp = 2.7 mm and rp = 2500 kg/m3 were used as a particulate phase. In the drying experiments water was used as an ideal suspension. The average and the standard deviation of the experimental variables were acquired using a LYNX data acquisition system and a routine made in the LabView software. It was possible to verify that the different z0 (5.0, 5.5, 6.0 e 6.5 cm) studied here influenced significantly the fluid dynamic behavior. Also, the dense and dilute regimes were identified by analyzing the experimental pressure gradients. The model used in this work was able to predict the experimental data satisfactorily. Although a significant influence of the air inlet temperature in the fluid dynamics and heat transfer behaviors was not observed in the range (80 and 100 ºC) studied here, it does affect the water evaporation rate, which was higher for the highest temperature. |
publishDate |
2009 |
dc.date.available.fl_str_mv |
2009-09-01 2016-06-02T19:56:34Z |
dc.date.issued.fl_str_mv |
2009-08-05 |
dc.date.accessioned.fl_str_mv |
2016-06-02T19:56:34Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SOUSA, Robson Costa de. Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro. 2009. 102 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2009. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufscar.br/handle/ufscar/4014 |
identifier_str_mv |
SOUSA, Robson Costa de. Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro. 2009. 102 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2009. |
url |
https://repositorio.ufscar.br/handle/ufscar/4014 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.confidence.fl_str_mv |
-1 -1 |
dc.relation.authority.fl_str_mv |
2e542afc-9fec-43b4-b11a-1eb2ed3a1f3d |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Química - PPGEQ |
dc.publisher.initials.fl_str_mv |
UFSCar |
dc.publisher.country.fl_str_mv |
BR |
publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFSCAR instname:Universidade Federal de São Carlos (UFSCAR) instacron:UFSCAR |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
UFSCAR |
institution |
UFSCAR |
reponame_str |
Repositório Institucional da UFSCAR |
collection |
Repositório Institucional da UFSCAR |
bitstream.url.fl_str_mv |
https://repositorio.ufscar.br/bitstream/ufscar/4014/1/2564.pdf https://repositorio.ufscar.br/bitstream/ufscar/4014/2/2564.pdf.jpg |
bitstream.checksum.fl_str_mv |
213ea9bc81b936a34a25200c96a96216 55fbc60107aa48c79a1275a2fc2e5ac1 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
|
_version_ |
1802136271923970048 |