Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2007 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFSCAR |
Texto Completo: | https://repositorio.ufscar.br/handle/ufscar/3990 |
Resumo: | A new method to prepare Pt nanoparticles (NPs) dispersed on Al2O3 and CeO2-Al2O3 is described in this work. The Pt-NPs were used to prepare CeO2-Al2O3-supported Pt nanocatalysts (Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3). The catalysts were characterized by BET surface area (SBET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) reaction of dehydrogenation of cyclohexane to measure Pt dispersion and transmission electronic microscopy (MET). The Pt-NPs were obtained from solution of [PtCl6]2-, poly(Nvinyl- 2-pyrolidone) (PVP) and methanol. The Al2O3 and CeO2-Al2O3 supports were obtained by sol-gel methods. The Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts were obtained by addition of Pt-NPs sol during sol-gel synthesis Al2O3 and CeO2-Al2O3. TEM analysis show that the synthesis of the Pt-NPs resulted in particles with average size of 3.2 nm and the results of TEM of the catalysts indicate that Pt particles, finely dispersed on the support occupying probably the interior of the pores of the support. The comparison between FTIR-CO results of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts indicated that the particles in the different catalysts show the same electronic density superficial and that there is a geometric modification on the surface of the particles of the Pt- NPs/CeO2-Al2O3 catalyst provoked by presence of CeOx on the surface of particles. The nanocatalysts Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 exhibited a high catalytic activity and stability for the steam reforming of methane and for the partial oxidation of methane. The CH4 turnover rate of Pt-NPs/CeO2-Al2O3 catalysts for the steam reforming of methane is around two orders of magnitude higher compared to that of Pt-NPs/Al2O3 catalyst. The high activity for Ce-contaning catalysts is assigned to higher accessibility of the Pt sites to CH4. The high stability of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 nanocatalysts in partial oxidation of methane is assigned to the high contact metal-support, which can be caused by preparation method that improves the accessibility of methane to Pt sites. |
id |
SCAR_d5a938d1b8b8ba6b426e27afbf744773 |
---|---|
oai_identifier_str |
oai:repositorio.ufscar.br:ufscar/3990 |
network_acronym_str |
SCAR |
network_name_str |
Repositório Institucional da UFSCAR |
repository_id_str |
4322 |
spelling |
Prieto, Paulo Juliano dos SantosBueno, José Maria Corrêahttp://lattes.cnpq.br/0157452280626031http://lattes.cnpq.br/71865883878589437a83567a-d1a7-4ed3-895b-d8407293e5562016-06-02T19:56:30Z2007-11-142016-06-02T19:56:30Z2007-03-16PRIETO, Paulo Juliano dos Santos. Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.. 2007. 82 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2007.https://repositorio.ufscar.br/handle/ufscar/3990A new method to prepare Pt nanoparticles (NPs) dispersed on Al2O3 and CeO2-Al2O3 is described in this work. The Pt-NPs were used to prepare CeO2-Al2O3-supported Pt nanocatalysts (Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3). The catalysts were characterized by BET surface area (SBET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) reaction of dehydrogenation of cyclohexane to measure Pt dispersion and transmission electronic microscopy (MET). The Pt-NPs were obtained from solution of [PtCl6]2-, poly(Nvinyl- 2-pyrolidone) (PVP) and methanol. The Al2O3 and CeO2-Al2O3 supports were obtained by sol-gel methods. The Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts were obtained by addition of Pt-NPs sol during sol-gel synthesis Al2O3 and CeO2-Al2O3. TEM analysis show that the synthesis of the Pt-NPs resulted in particles with average size of 3.2 nm and the results of TEM of the catalysts indicate that Pt particles, finely dispersed on the support occupying probably the interior of the pores of the support. The comparison between FTIR-CO results of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts indicated that the particles in the different catalysts show the same electronic density superficial and that there is a geometric modification on the surface of the particles of the Pt- NPs/CeO2-Al2O3 catalyst provoked by presence of CeOx on the surface of particles. The nanocatalysts Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 exhibited a high catalytic activity and stability for the steam reforming of methane and for the partial oxidation of methane. The CH4 turnover rate of Pt-NPs/CeO2-Al2O3 catalysts for the steam reforming of methane is around two orders of magnitude higher compared to that of Pt-NPs/Al2O3 catalyst. The high activity for Ce-contaning catalysts is assigned to higher accessibility of the Pt sites to CH4. The high stability of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 nanocatalysts in partial oxidation of methane is assigned to the high contact metal-support, which can be caused by preparation method that improves the accessibility of methane to Pt sites.Um novo método de preparação para catalisadores com nanopartículas de Pt (NPs), dispersas em Al2O3 e CeO2-Al2O3 é descrito nesse trabalho. As nanopartículas de Pt foram previamente obtidas por redução do H2PtCl6 em solução de metanol em um sistema de refluxo por 180 minutos na presença do polímero polivinlpirrolidona (PVP), que atua como agente protetor e estabilizante controlando o tamanho das partículas durante a síntese. Os suportes Al2O3 e CeO2-Al2O3 foram pelo método sol gel. Os catalisadores Pt-NPs/Al2O3 e Pt- NPs/CeO2-Al2O3 foram preparados pela adição de alíquotas da dispersão coloidal contendo as nanopartículas aos géis Al2O3 e CeO2-Al2O3 durante a síntese sol gel. Os catalisadores Pt-NPs/Al2O3 e Pt-NPs/12CeO2-Al2O3 foram caracterizados por técnicas de medida de área superficial (BET), difração de raios X (DRX), transformada de Fourier do espectros de adsorção de CO na região do infravermelho (DRIFT de CO), microscopia eletrônica de transmissão (TEM) e reação de desidrogenação do cicloexano. As análises de TEM indicaram que a síntese das partículas de Pt levou à formação de partículas com tamanho médio de 3,2 nm e os resultados de TEM dos catalisadores indicam que as partículas de Pt estão bem distribuídas no suporte, ocupando provavelmente os poros do suporte. A comparação entre os resultados DRIFT de CO para os catalisadores Pt- NPs/Al2O3 e Pt-NPs/12CeO2-Al2O3 indicaram que as partículas presentes nos diferentes catalisadores apresentam mesma densidade eletrônica superficial e apontaram para uma modificação geométrica na superfície das partículas presentes no catalisador Pt-NPs/12CeO2- Al2O3, provocadas pela presença de CeOx na superfície das partículas. Os nanocatalisadores exibiram uma elevada atividade e estabilidade para reações de reforma a vapor e oxidação parcial do metano. O TOFCH4 para o catalisador Pt-NPs/12CeO2- Al2O3 apresentou magnitude duas vezes maior para a reforma a vapor no metano quando comparado ao catalisador Pt-NPs/Al2O3. A alta atividade do catalisador contendo Ce está associada a maior acessibilidade da molécula de metano aos sítios de Pt. A alta estabilidade dos catalisadores Pt-NPs/Al2O3 e Pt-NPs/CeO2-Al2O3 na oxidação parcial do metano está associada à alta interação metal-suporte que foi causada pelo método preparação que resulta em uma maior acessibilidade da molécula de metano aos sítios da Pt.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Engenharia Química - PPGEQUFSCarBRCatalisadoresReforma - metanoPlatinaNanopartículasSol-Gel métodoÓxido de cérioENGENHARIAS::ENGENHARIA QUIMICANanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-1-13b275236-acc5-4218-a33b-8f802e7f5a18info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINALDissPJSP.pdfapplication/pdf1910866https://repositorio.ufscar.br/bitstream/ufscar/3990/1/DissPJSP.pdf5b5024066777ac7e3c56ead77884d2c7MD51THUMBNAILDissPJSP.pdf.jpgDissPJSP.pdf.jpgIM Thumbnailimage/jpeg7234https://repositorio.ufscar.br/bitstream/ufscar/3990/2/DissPJSP.pdf.jpgbe7dfb189fa1237a56c8db78dd7ad105MD52ufscar/39902023-09-18 18:30:59.209oai:repositorio.ufscar.br:ufscar/3990Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:30:59Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.por.fl_str_mv |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
title |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
spellingShingle |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. Prieto, Paulo Juliano dos Santos Catalisadores Reforma - metano Platina Nanopartículas Sol-Gel método Óxido de cério ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
title_full |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
title_fullStr |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
title_full_unstemmed |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
title_sort |
Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano. |
author |
Prieto, Paulo Juliano dos Santos |
author_facet |
Prieto, Paulo Juliano dos Santos |
author_role |
author |
dc.contributor.authorlattes.por.fl_str_mv |
http://lattes.cnpq.br/7186588387858943 |
dc.contributor.author.fl_str_mv |
Prieto, Paulo Juliano dos Santos |
dc.contributor.advisor1.fl_str_mv |
Bueno, José Maria Corrêa |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/0157452280626031 |
dc.contributor.authorID.fl_str_mv |
7a83567a-d1a7-4ed3-895b-d8407293e556 |
contributor_str_mv |
Bueno, José Maria Corrêa |
dc.subject.por.fl_str_mv |
Catalisadores Reforma - metano Platina Nanopartículas Sol-Gel método Óxido de cério |
topic |
Catalisadores Reforma - metano Platina Nanopartículas Sol-Gel método Óxido de cério ENGENHARIAS::ENGENHARIA QUIMICA |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA QUIMICA |
description |
A new method to prepare Pt nanoparticles (NPs) dispersed on Al2O3 and CeO2-Al2O3 is described in this work. The Pt-NPs were used to prepare CeO2-Al2O3-supported Pt nanocatalysts (Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3). The catalysts were characterized by BET surface area (SBET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) reaction of dehydrogenation of cyclohexane to measure Pt dispersion and transmission electronic microscopy (MET). The Pt-NPs were obtained from solution of [PtCl6]2-, poly(Nvinyl- 2-pyrolidone) (PVP) and methanol. The Al2O3 and CeO2-Al2O3 supports were obtained by sol-gel methods. The Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts were obtained by addition of Pt-NPs sol during sol-gel synthesis Al2O3 and CeO2-Al2O3. TEM analysis show that the synthesis of the Pt-NPs resulted in particles with average size of 3.2 nm and the results of TEM of the catalysts indicate that Pt particles, finely dispersed on the support occupying probably the interior of the pores of the support. The comparison between FTIR-CO results of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 catalysts indicated that the particles in the different catalysts show the same electronic density superficial and that there is a geometric modification on the surface of the particles of the Pt- NPs/CeO2-Al2O3 catalyst provoked by presence of CeOx on the surface of particles. The nanocatalysts Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 exhibited a high catalytic activity and stability for the steam reforming of methane and for the partial oxidation of methane. The CH4 turnover rate of Pt-NPs/CeO2-Al2O3 catalysts for the steam reforming of methane is around two orders of magnitude higher compared to that of Pt-NPs/Al2O3 catalyst. The high activity for Ce-contaning catalysts is assigned to higher accessibility of the Pt sites to CH4. The high stability of Pt-NPs/Al2O3 and Pt-NPs/CeO2-Al2O3 nanocatalysts in partial oxidation of methane is assigned to the high contact metal-support, which can be caused by preparation method that improves the accessibility of methane to Pt sites. |
publishDate |
2007 |
dc.date.available.fl_str_mv |
2007-11-14 2016-06-02T19:56:30Z |
dc.date.issued.fl_str_mv |
2007-03-16 |
dc.date.accessioned.fl_str_mv |
2016-06-02T19:56:30Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
PRIETO, Paulo Juliano dos Santos. Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.. 2007. 82 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2007. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufscar.br/handle/ufscar/3990 |
identifier_str_mv |
PRIETO, Paulo Juliano dos Santos. Nanopartículas de Pt suportadas em Al2O3 e CeO2-Al2O3: síntese, caracterização e propriedades catalíticas para reforma do metano.. 2007. 82 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2007. |
url |
https://repositorio.ufscar.br/handle/ufscar/3990 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.confidence.fl_str_mv |
-1 -1 |
dc.relation.authority.fl_str_mv |
3b275236-acc5-4218-a33b-8f802e7f5a18 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Química - PPGEQ |
dc.publisher.initials.fl_str_mv |
UFSCar |
dc.publisher.country.fl_str_mv |
BR |
publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFSCAR instname:Universidade Federal de São Carlos (UFSCAR) instacron:UFSCAR |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
UFSCAR |
institution |
UFSCAR |
reponame_str |
Repositório Institucional da UFSCAR |
collection |
Repositório Institucional da UFSCAR |
bitstream.url.fl_str_mv |
https://repositorio.ufscar.br/bitstream/ufscar/3990/1/DissPJSP.pdf https://repositorio.ufscar.br/bitstream/ufscar/3990/2/DissPJSP.pdf.jpg |
bitstream.checksum.fl_str_mv |
5b5024066777ac7e3c56ead77884d2c7 be7dfb189fa1237a56c8db78dd7ad105 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
|
_version_ |
1802136271831695360 |