Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630

Detalhes bibliográficos
Autor(a) principal: Rossi, Marcos Antonio
Data de Publicação: 2011
Outros Autores: Santos, João Eduardo Guarnetti dos, Silva, André Luis da
Tipo de documento: Artigo
Idioma: por
Título da fonte: Projética Revista Científica de Design
DOI: 10.5433/2236-2207.2011v2n1p37
Texto Completo: https://ojs.uel.br/revistas/uel/index.php/projetica/article/view/9553
Resumo: This article discusses an ergonomic analysis of the controls used by tractor operators, covering their positions in relation to the casing of your job. Was performed an assessment of the controls of the job of a model NH 7630 tractor average power of 74 kW (100 CV), using the norms of the ABNT. With this screening could detect the positive and negative. Then was accomplished an analytical study of the controls. Evaluation results show that some controls of tractors have errors evaluated in relation to NBR/ ISO 6682.
id UEL-10_00aeadbc829185eee8d319fefccec3f3
oai_identifier_str oai:ojs.pkp.sfu.ca:article/9553
network_acronym_str UEL-10
network_name_str Projética Revista Científica de Design
spelling Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630Conformidade Ergonômica dos Controles no Posto de Trabalho do Operador de Trator: Estudo de Caso Nh 7630ErgonomicWorkstationTractorsErgonomiaPosto de trabalhoTratores agrícolasThis article discusses an ergonomic analysis of the controls used by tractor operators, covering their positions in relation to the casing of your job. Was performed an assessment of the controls of the job of a model NH 7630 tractor average power of 74 kW (100 CV), using the norms of the ABNT. With this screening could detect the positive and negative. Then was accomplished an analytical study of the controls. Evaluation results show that some controls of tractors have errors evaluated in relation to NBR/ ISO 6682.Este artigo aborda uma análise ergonômica dos controles utilizados pelos operadores de tratores, abordando seus posicionamentos em relação ao invólucro do seu posto de trabalho. Foi executada uma avaliação dos controles do posto de trabalho de um trator modelo NH 7630 de potência média de 74 kW (100 CV), utilizando-se das normas vigentes da ABNT. Com esta triagem foi possível detectar os pontos positivos e negativos. Em seguida, efetivou-se um estudo analítico dos controles. Os resultados desta avaliação demonstram, que alguns controles dos tratores avaliados possuem erros em relação à NBR/ISO 6682.Universidade Estadual de Londrina2011-12-17info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionAvaliado por Paresapplication/pdfhttps://ojs.uel.br/revistas/uel/index.php/projetica/article/view/955310.5433/2236-2207.2011v2n1p37Projetica; v. 2 n. 1 (2011); 37-522236-2207reponame:Projética Revista Científica de Designinstname:Universidade Estadual de Londrina (UEL)instacron:UELporhttps://ojs.uel.br/revistas/uel/index.php/projetica/article/view/9553/9242Copyright (c) 2011 Projeticainfo:eu-repo/semantics/openAccessRossi, Marcos AntonioSantos, João Eduardo Guarnetti dosSilva, André Luis da2021-10-18T14:18:53Zoai:ojs.pkp.sfu.ca:article/9553Revistahttps://www.uel.br/revistas/uel/index.php/projetica/PUBhttps://www.uel.br/revistas/uel/index.php/projetica/oai||projetica@uel.br2236-22072236-2207opendoar:2021-10-18T14:18:53Projética Revista Científica de Design - Universidade Estadual de Londrina (UEL)false
dc.title.none.fl_str_mv Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
Conformidade Ergonômica dos Controles no Posto de Trabalho do Operador de Trator: Estudo de Caso Nh 7630
title Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
spellingShingle Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
Rossi, Marcos Antonio
Ergonomic
Workstation
Tractors
Ergonomia
Posto de trabalho
Tratores agrícolas
Rossi, Marcos Antonio
Ergonomic
Workstation
Tractors
Ergonomia
Posto de trabalho
Tratores agrícolas
title_short Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
title_full Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
title_fullStr Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
title_full_unstemmed Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
title_sort Compliance ergonomic controls at the workplace of the operator of tractor: Case Study NH 7630
author Rossi, Marcos Antonio
author_facet Rossi, Marcos Antonio
Rossi, Marcos Antonio
Santos, João Eduardo Guarnetti dos
Silva, André Luis da
Santos, João Eduardo Guarnetti dos
Silva, André Luis da
author_role author
author2 Santos, João Eduardo Guarnetti dos
Silva, André Luis da
author2_role author
author
dc.contributor.author.fl_str_mv Rossi, Marcos Antonio
Santos, João Eduardo Guarnetti dos
Silva, André Luis da
dc.subject.por.fl_str_mv Ergonomic
Workstation
Tractors
Ergonomia
Posto de trabalho
Tratores agrícolas
topic Ergonomic
Workstation
Tractors
Ergonomia
Posto de trabalho
Tratores agrícolas
description This article discusses an ergonomic analysis of the controls used by tractor operators, covering their positions in relation to the casing of your job. Was performed an assessment of the controls of the job of a model NH 7630 tractor average power of 74 kW (100 CV), using the norms of the ABNT. With this screening could detect the positive and negative. Then was accomplished an analytical study of the controls. Evaluation results show that some controls of tractors have errors evaluated in relation to NBR/ ISO 6682.
publishDate 2011
dc.date.none.fl_str_mv 2011-12-17
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Avaliado por Pares
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://ojs.uel.br/revistas/uel/index.php/projetica/article/view/9553
10.5433/2236-2207.2011v2n1p37
url https://ojs.uel.br/revistas/uel/index.php/projetica/article/view/9553
identifier_str_mv 10.5433/2236-2207.2011v2n1p37
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://ojs.uel.br/revistas/uel/index.php/projetica/article/view/9553/9242
dc.rights.driver.fl_str_mv Copyright (c) 2011 Projetica
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2011 Projetica
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Estadual de Londrina
publisher.none.fl_str_mv Universidade Estadual de Londrina
dc.source.none.fl_str_mv Projetica; v. 2 n. 1 (2011); 37-52
2236-2207
reponame:Projética Revista Científica de Design
instname:Universidade Estadual de Londrina (UEL)
instacron:UEL
instname_str Universidade Estadual de Londrina (UEL)
instacron_str UEL
institution UEL
reponame_str Projética Revista Científica de Design
collection Projética Revista Científica de Design
repository.name.fl_str_mv Projética Revista Científica de Design - Universidade Estadual de Londrina (UEL)
repository.mail.fl_str_mv ||projetica@uel.br
_version_ 1822182360203919360
dc.identifier.doi.none.fl_str_mv 10.5433/2236-2207.2011v2n1p37

Registros relacionados